0
내 장바구니
La San Marco spring 15x20mm
€2.07
€1.71 세금 별도
GDPR 준수
개인 데이터 보호
배송 정책
주문 배송에 관한 모든 것
반품 정책
우리의 반품 정책에 관한 모든 내용
This stainless steel compression spring is used in the inlet valve on various La San Marco espresso machines. The part reference of San Marco for this item is 200034
This compression spring is used as a valve return spring on various models. This spring has a diameter of 15mm and a length of 20mm. This spring has been made in Italy.
You can use this spring on the La San Marco 85 and the La San Marco 95 espresso machines.
49-180-8SM034
4 상품
상세정보
- 길이
- 20mm
- 라 산 마르코
- 85
95 - 부품 번호
- San Marco 200034
- 상표
- La San Marco
- 외경(OD)
- 15mm
- 유형 부분
- Compression spring
댓글 (0)
현재 고객 상품평이 없습니다.
8 other product
두카티 에너지아 3.15µF 416.10.04.64 커패시터
이 제품 페이지의 커패시터는 이탈리아 브랜드인 Ducati Energia에서 제조한 제품입니다. 이 특정 모델은 최대 450V 50/60Hz까지 작동할 수 있는 3.15µF 모델입니다. 작동 온도는 -25°C에서 최대 85°C이며 커넥터의 폭은 6,35mm, 두께는 0,8mm입니다.
이 커패시터 끝에는 M8 나사산이 있습니다. 외경은 28mm이고 길이는 55mm입니다. 이 제품은 루마니아에서 제조되었습니다.
€8.35
La Spaziale infuser spring holder bushing
This item is a spring holder bushing used on various La Spaziale brewing groups. This item is a OEM/original La Spaziale spare part and has the part reference number 00365.
This brass bushing has a outer diameter of 32mm and a internal diameter of 15mm. The height is on the outside rim 4mm and the inside it is 8mm.
You can use this item on various,...
€11.69
PTFE gasket 24x18x2mm
The item on this product page is a PTFE gasket. This gasket is in use in various applications such as brewing groups, steam and water valves and water inlet valves. You can use this gasket with brands such as Carimali, Vibiemme, Scala, Grimac, Astoria, Pavoni, Wega and Victoria Arduino
This gasket has been made from the material PTFE. The outer diameter...
€1.80
Carimali vale pin 6x25.5mm
The item on this page is a OEM/original La Carimali spare part. This item is the pin where the lever mechanism of the steam and water valve moves around. The La Carimali part reference number for this item is 14.00848.
This steam and water valve pin has a diameter of 6mm and a overall length of 25,5mm. this item has been made in Italy.
This valve pin...
€5.01
Grimac G11 water inlet valve
The item shown on this page is a water inlet valve used on various espresso machines such as Grimac and Fiorenzato C.s. The part references for Grimac and Fiorenzato are the same, it is A2200202.
This water inlet valve can be used on the Grimac G11, but mainly on Fiorenzato C.s. models such as the Fiorenzato Ducale, Fiorenzato Fenice, Fiorenzato Lido,...
€118.14