On this category page you will find a wide selection of espresso machine dosing devices. The dosing device is basically a level regulator with volumetric capabilities. Seen the dosing device is required to do volumetric dosing in combination with a flowmeter and a touch panel. You have simple dosing devices where you can connect the level probe, flowmeter and the touchpanel. But you do also have dosing devices where you can connect NTC temperature probes, displays
Most of the dosing devices are made by the Italian companies Giemme and Gicar, these can normally be found in their typical cases. But there are various other brands which don´t use these manufactures and just have a pcb made with a company.
The electronics are normally the most expensive component of the espresso machine. Make sure that the dosing device your looking for has matching part reference numbers of the manufacturers. If you are not sure if this is the case, contact us and we will try to help you.
The item on this page is a Brasilia dosing device. This dosing device can be used on the Brasilia Portofino Restyling, 1 and 2 groups. The Gicar part reference number for this item is 9.5.22.78G00 This dosing device is called the 3D5 2GRP CTXLC(SC) 230V.
The item on this page is a OEM/original Nuova Simonelli spare part. This electronic board is only suitable for the 1 group Nuova Simonelli Appia espresso machines. The Nuova Simonelli part reference number for this item is 04900730 and for Gicar the reference number is 8.5.86.23/A. This circuit board is 120x66mm and has been made in Italy. Always...
The item on this page is a dosing device which is used on various brands of the Astoria CMA group. You can use this dosing device on the brands Astoria and Wega. The Astoria part reference number is 18090031 and the Wega part reference number is WY18090031. The Gicar part reference number is9.5.21.20G This unit is made by Gicar and is called the...
On this product page you will find a OEM/Original Wega spare part. This item is a touchpanel/dosing device with the part reference of WY18363 and has the Gicar code of 9.5.17.40G This dosing device/touchpanel unit has in total 5 touchpanel keys. 4 of those are pre-set volumetric keys. The other one is the continuous and programming key. With this key you...
The dosing device on this product page is a OEM/Original San Remo spare part. The San Remo part reference number is 10112382E and the Gicar part reference number is 9.5.32.89G00 This dosing device can only be used on the San Remo Verona RS. This unit is called the Dosatura 3d5 ORCHESTRA PLUS FULL RANGE “VERONA RS”. The unit uses as main...
The dosing device on this page can be used on various Vibiemme espresso machines. The Vibiemme part reference for this item Is ELETDOS3D2GSI. This device has been made by the Italian company Gicar, their part reference is 9.5.14.67G01 and 9.5.14.67V01. This unit is suitable for max 2 group espresso machines. The name of this model is 3D-2GRC-SILVER. It...
The push button panel on this page is a OEM/Original La Scala spare part. The La Scala part reference of this item is C-0603. The unit is manufactured in Italy by the Italian company Gicar, the part reference for this item is 9.5.28.65G00 The name of this Gicar dosing unit/touchpanel is DOS 1d5e GRCZ NKP S10 “Tank Probe. This unit runs on...
This central dosing device is used in a variety of older La Spaziale espresso machines. If they are older, it doesn’t mean that they can’t be fixed offcourse. The part Gicar name is DOS 30/2GR+Liv with the Gicar part number 9.1.23.45G. this specific item is a 230V unit. This specific unit is used on a variety of La Spaziale models: The la...
This dosing device box can be used on various La Spaziale espresso machine models. The La Spaziale part reference number for this item is 08570. The item is made by the Italian company Giemme with the part references 01.12.0068 and 01.12.0089. This unit is called the DOS. 2 Gruppi v.2013 and has been made in Italy. This is not the original La...
The dosing device on this product page can be used on various Vibiemme espresso machines. The corresponding Vibiemme part reference for this item is ELETDOS30. This item has been made by the Italian company Gicar and has their part reference of 9.1.23.10G00. The unit has the name of 30 MICRO ST./C NO SIC and is a 230/240V unit. This item has been made in...
The level regulator/dosing device on this product page is a OEM/Original Astoria CMA spare part and is used on various Astoria espresso machine models. The Astoria part reference number for this item is 18090068, the Gicar part reference number for this item is9.5.37.08G01 This unit is made by the Italian company Gicar and is called Dosatura new uZ/NTC...
This dosing unit is compatible with various Vibiemme espresso machine models. The Vibiemme part reference for this item is ELETDOSRECUMP. The device has been made by the Italian company Gicar, their part reference is 9.9.04.18G This unit is called the Dosatura Manuale, DELUXE 3GRC 240Vac. This unit is used for the manual versions, so without the...
The item on this product page is a OEM/Original La Pavoni spare part. This dosing device can be used on various La Pavoni espresso machine models. The Gicar part reference numbers are 9.5.14.76G and 9.5.15.32G. The La Pavoni part reference numbers are 438213, 438215, 438233 and 438265. This dosing device is called the 3d XLC...
The dosing device on this product page can be used on various Bezzera espresso machine models. The Bezzera and Gicar part reference numbers can be found in the extra info tab. This dosing device has been made by the Italian company Gicar. The unit is called the DOSATURA 3d5 3GRCTZ LC 240Vac. This unit can be used on Bezzera espresso machines from 1 to 3...
The item on this product page is a OEM/Original La San Marco dosing device. This item can be used on the San Marco 85 espresso machine. The La San Marco part reference numbers for this item are 108543 and CCICEN0280. This dosing device can be used on espresso machine models ranging from 1 up to 4 brewing groups. This unit is a 230V version. This...
On this page you will find a OEM/original CPU for the Nuova Simonelli Aurelia and the Victoria Arduino Venus Century. The Victoria Arduino part reference is 04900716 and for the Nuova Simonelli the part reference is 04900716 . This circuit board can only be used on 3 and 4 group machines. The circuit board itself is 117x133mm and has been...
On this product page you will find a OEM/Original dosing device/touch panel unit used on various Astoria and Wega espresso machines. The Astoria part reference for this item is 18365 and the Wega part reference is WY18365. The Gicar code for this item is 9.5.17.35G This unit has in total 5 keys. 4 of those keys are pre-set volumetric settings and the...
On this product page you will find a Bezzera dosing device suitable for a variety of espresso machine models such as the Bezzera Ellisse and the Bezzera Ebbis. The Bezzera part reference for this item is 7662529. The Gicar part references can be found in the extra info tab. This Bezzera dosing device has the name DOSATURA 3d5 3GRCTZ LC 240Vac. the...
Cookie | Provider | Purpose | Expiry |
---|---|---|---|
PHP_SESSID | brooks-parts.com | The PHPSESSID cookie is native to PHP and allows websites to store serialised status data. On the website it is used to establish a user session and to pass state data through a temporary cookie, which is commonly known as a session cookie. These Cookies will only remain on your computer until you close your browser. | Session |
PrestaShop-# | brooks-parts.com | This is a cookie used by Prestashop to store information and keep the user's session open. It stores information such as currency, language, customer ID, among other data necessary for the proper functioning of the shop. | 480 hours |