On this boiler overview page you will find a variety of boiler components used on Astoria espresso machines. With a lot of espresso machine boiler used by Astoria is a lot of similarity between the espresso machine models, but also a lot off differences.
Some Astoria espresso machine boilers have a removable flange, like the Astoria Divina, Astoria Gloria and the Astoria Perla. But some models like the Astoria Plus 4 you have fully closed boilers, off course a hole for the heating element.
But the espresso machines of Astoria have a lot of similarities. They are all fitted with a heating element, safety valve, vacuum valve, level probe and a pressure switch. In some cases you will find a temperature probe in the heating element
You will find a variety of items like boiler gaskets, copper valve gaskets, safety valves, vacuum valves, boiler fittings, injector tubes, heat exchangers and brass fittings. If you can’t find the Astoria boiler parts your looking for, send us a message.
The drain tub on this page is one of the most commonly used ones on Astoria and Wega espresso machines. The part is a OEM/Original spare part for Astoria and Wega espresso machines. The Astoria part number is 15502 and the Wega part number is WY15502. This drain cup has been made from a plastic. The outer diameter of the cup is 80mm. The hose...
On this product page you will find a blind klingersil 4400 gasket used in a variety of Astoria and Wega espresso machines. The item listed is a OEM/original item. The Astoria part number used is 12007 and the Wega part number is WY12007 This flat gasket has a outer diameter of 11mm and a thickness of 3mm. This gasket is used to seal of a section of the...
The item on this product page is a OEM/Original Astoria CMA spare part. This brass washer can be used on various Astoria and Wega espresso machines. The part reference for this item are for Astoria 25651 and for Wega WY25651. This washer has been made from brass. The outer diameter is 28mm and the inner diameter is 17mm. The thickness is 2mm. This...
This is maybe one of the most universal gaskets around. The gasket for the male 3/8” BSP-G fitting. You can use this fitting on water inlet valves, boilers, safety valves, anti vacuum valves. This copper gasket is a compression version, so it will form slightly around the surfaces it is mating. The outer diameter is 22,8mm, the inner diameter is...
The item on this product page is a o ring which can be used on various espresso machine brands and models, such as Astoria and Wega. The part as the Astoria part reference number 12300040 and the Wega part reference number WY12300040 This o ring has been made from EPDM. The cord diameter is 3,53mm and the internal diameter is 44,04mm. This o ring is used...
The product on this page is a gasket, a copper one. This copper gasket is a flat gasket, so not a compression gasket. This flat copper gasket is used in a variety of espresso machines and applications. You mainly see them in the category of steam and water valve or boiler components. This gasket has a outer diameter of 22mm a inner diameter of 17 and a...
The item on this product page is a safety valve protective cover, if the safety valves opens this valve will drain the water coming out of the valve to the drain. This cover is a OEM/Original Astoria CMA spare part, so you can use this item on various espresso machine brands such as Astoria and Wega. The Astoria part reference number is 56009980 and...
The tube on this page is a OEM/Original Astoria CMA spare part, so you can use this item on various Astoria and Wega espresso machines. The Astoria part reference for this item is 52000410 and the Wega part reference for this item is WY4952000410 This item is made up out of 2 pieces, a tube and a L fitting. The tube has a outer diameter of 6mm and a...
The item on this product page is a OEM/original Astoria CMA spare part. This bent heat exchanger is used on various Astoria espresso machine models. The Astoria part references for this item are 63050 and 63100. This heat exchanger is made from copper. It has been made with a slight curve into it. The diameter of the HX is 42mm. This item has been made...
The boiler safety valve shown on this page can be used on wide selection of espresso brands such as Brasilia, Wega, Astoria, Grimac, Cimbali, Faema, Marzocco and Carimali. The part references can be found on the extra info tab. This boiler safety valve has a male 3/8” BSP-G thread. The safety valve has been set at 1,8 bar, this is not adjustable....
The o ring on this product page can be used on various brands of the Astoria CMA group, such as Astoria and Wega. The Astoria part reference number for this item is 12300000 and for Wega it is WY12300000.. This o ring has been made from the material FKM. The cord diameter is 2,62mm and the internal diameter is 39.34mm. This o ring has been made in...
Brass fittings used on espresso machines are generic items, seen they are used in quite a lot of coffee machines. This specific model is a nut with a 3/8” BSP-G thread with a height of 6mm. The wrench size used for this item is a 21. Which models use this 3/8” BSP-G nut.? Well you can find this nut with brands like: Gaggia, Saeco, Victoria...
The item on this product page is a brass washer, this washer can be used in steam and water valves of various espresso machine brands. You can use this brass washer on valves made by Marzocco, Faema, Astoria and Wega. The part references are for Faema 4051052071, for Marzocco L165/2, for Astoria 25651 and for Wega WY25651 This...
The thermostat on this page is a thermostat used on various domestic espresso machines. You can find this thermostat on various model of Gaggia and Brasilia. The part reference for Brasilia is 08702.2.00.08 and 0870220008. For Gaggia the part reference is DM1288 and DM1288/K This contact thermostat is a automatic model. The thermostat...
The item on this product page is a OEM/Original Astoria spare part. This item is a thermosiphonic heat exchanger. This heat exchanger is used on various Astoria espresso machines and has the Astoria part reference number for this item is 63200002 This heat exchanger boiler is made from copper with fittings soldered to it. The outer diameter of this...
The item on this product page is a boiler injector tube which can be used on various Astoria and Wega espresso machines. The Astoria part references for this item are 25686001 and 52002788, for Wega the part reference is 52002788. This injector tube is made from 2 components, a brass fitting and a copper tube. The fitting has on each...
The Astoria and Wega drain tank on this page is only used on a few models made by Astoria CMA. This drain pan is a OEM/Original item. The Wega part number for this item is WY15502003 , the Astoria number is 15502003. This plastic drain tank has 8 tube connection points for drain inlet. And 1 exhaust drain to the sewage system. This drain tub can...
Cookie | Provider | Purpose | Expiry |
---|---|---|---|
PHP_SESSID | brooks-parts.com | The PHPSESSID cookie is native to PHP and allows websites to store serialised status data. On the website it is used to establish a user session and to pass state data through a temporary cookie, which is commonly known as a session cookie. These Cookies will only remain on your computer until you close your browser. | Session |
PrestaShop-# | brooks-parts.com | This is a cookie used by Prestashop to store information and keep the user's session open. It stores information such as currency, language, customer ID, among other data necessary for the proper functioning of the shop. | 480 hours |