On the espresso machines of the La Cimbali brand there are various applications where solenoid valves are used. With every pump driven espresso machine you can find on various locations inside the espresso machine a solenoid valve. The solenoid valve brands you mainly find on La Cimbali espresso machines are Parker and Lucifer. Instead of the standard 220/240 (110/120V) solenoid valve coils, Cimbali also uses 24V to energize the solenoid valve coils.
There are various types of solenoid valves used on La Cimbali espresso machines. The body can have a flanged connection, or with female threads (1/8 or ¼”) then you also have 2 way valves or 3 way valves. A other thing is the orifice inside the brewing group this depends on the application but normally between a diameter of 1,5 and 2,5mm.
The most famous solenoid valve is the brewing group solenoid valve, this closes when the brewing process starts and opens up again when it stops. Besides that you have the water inlet valves. With La Cimbali these are flanged solenoid valves.
But other locations on La Cimbali espresso machines are the water outlet, the Turbosteam and the automatic milk delivery system
This 3 way solenoid valve is one of the most commonly found solenoid valves. The part is produced by Parker in Italy. This valve is mainly used as a brewing group solenoid valve. The remaining water from the group comes out of the outlet at the top. The Parker part numbers for this item are 393107J and 393112J This solenoid valve is a 3 way valve. The...
The solenoid valve on this product page is one made by the company Lucifer. The coil states Parker, this is the main company. This solenoid valve is used in various La Cimbali and Faema espresso machines. This solenoid valve is a 2 way valve. The coil used is a 9W 24V model. The hole diameter is 2,5mm and is sealed off with a FKM seal. The maximum...
The product on this page is a solenoid valve connector, large F fitting. With this connector you can seal off and connect your wiring and solenoid valve to each other. These connectors can be used on all types of standard solenoid valve coils. Where the positive and negative are spaced apart approx. 17mm. This solenoid valve connector can be basically...
On this page you will find a 3 way solenoid valve made by the company Parker. This specific model is a 24V AC 3 way valve. Which can be used on some Faema and San Marco brewing groups. The parker part number for this item is 393110J This solenoid valve is a flanged 3 way valve. The flange is sealed off with the 2 o rings at the bottom of the valve....
On this page you will find one of the most used brewing group solenoid valves in espresso machines. But this is instead of a 230V version a 115V version. This solenoid valve has been manufactured by the company Parker. The Parker parts reference for this solenoid valve is 393106J or 393111J This 3-way solenoid valve is a model with a flat flange, this...
The solenoid valve on this page is a 3 way solenoid valve, mainly with the application as a brewing group solenoid valve. Parker has listed this part under 471012 and 471013 The coil used on this solenoid valve is a 9W 220/240V which runs on 50/60Hz. The coil number for this solenoid valve is 483510S6 The valve in question is a 3 way solenoid...
The item on this page is a 3 way solenoid valve made by the brand Lucifer. This item is slightly different, seen it’s not a standard 220/230V model. But it is a 110V model. This 3 way valve can be used on a variety of espresso machine brands such as Casadio, Brugnetti, San Marco, La Scala, Cimbali, Grimac, Faema, Astoria, Nuova Simonelli, La...
On this page you will find a Parker 2 way solenoid valve. This solenoid valve can be used on Astoria (18159002), San Remo (10303093A) and Wega (WY18159002) water inlet valves. The Parker part number for this solenoid valve is 2019F1GRG7XS03XS6 This 2 way solenoid valve is of the new design, so no brass base but a stainless steel one which is NSF...
The solenoid valve on this product page is made by the company Lucifer (it does state parker, but that is the same company). This type of solenoid valve can be found on various espresso machine brands such as Astoria, Cimbali, Bezzera, San Remo and Casadio. The part reference numbers can be found in the extra info tab. This solenoid valve is a 2 way...
The use of brass as the base of a solenoid valve is the standard. But the company ODE now also manufactures the bases from the techno polymer PPS. This 2 way solenoid valve is a flange model. This flange is bolted against a other machined flat surface and is sealed with 2 o rings. 1 for the inlet and the other one for the outlet. The orifice which lets...
The Italian solenoid manufacturer ODE is currently the only espresso machine solenoid manufacturer who makes some of their solenoid from the Techno polymer PPS. On this page you see a 3 way solenoid valve made from PPS with the part number 31APBA1R15-13T0 As mentioned before this is a 3 way solenoid valve with a flange. This flange mates against a other...
On this page you will find a threaded 2 way solenoid valve. This solenoid valve is made by Parker, this item ahs been manufactured in Italy. This valve is mainly used as a boiler filling valve, due to the big size of Orifice. This valve has 2 female 1/8” BSP-G connections, the in as well as the outlet. The orifice of this valve is 2,5mm and the...
In the world of espresso machines ODE is the only manufacturer who uses the techno polymer PPS. This specific model is a 2 way solenoid valve made by the Italian company ODE and has the part number 21APBK1R15-RPT0 The 2 way solenoid valve you see on this page is a flange model, this model is bolted to a other flat surface and is sealed off at the bottom...
The solenoid valve on this product page is a 2 way solenoid valve which is mainly used on espresso machines of the Cimbali group. You can find this solenoid valve with Faema and Cimbali espresso machines This specific solenoid valve has been made by Lucifer (the valve shows parker, that is the main company) the parker part reference for this item is...
The item on this product page is a solenoid valve made by the Italian company ODE. The ODE part reference number for this item is 21AP1K1V25-T0+... . This solenoid valve can be used on various espresso machine brands such as Cimbali and Faema. The Cimbali part reference number is 533-895-100R and for Faema 533895100R. This model of solenoid valve is...
Cookie | Provider | Purpose | Expiry |
---|---|---|---|
PHP_SESSID | brooks-parts.com | The PHPSESSID cookie is native to PHP and allows websites to store serialised status data. On the website it is used to establish a user session and to pass state data through a temporary cookie, which is commonly known as a session cookie. These Cookies will only remain on your computer until you close your browser. | Session |
PrestaShop-# | brooks-parts.com | This is a cookie used by Prestashop to store information and keep the user's session open. It stores information such as currency, language, customer ID, among other data necessary for the proper functioning of the shop. | 480 hours |