La San Marco lever group bearing

The heating element gasket on this page can be used on a variety of Bezzera espresso machine heating elements. The Bezzera part reference number for this item is 5492006 This gasket has a outer diameter of 76mm a inner diameter of 40mm and a thickness of 2mm. The material used is a fibre material. The Bezzera models you can use this on are the Bezzera...

The nut on this product page is a welding end cap nut. This nut is used to install the tube with the welding end cap to a other fitting.  This brass nut is used in combination with a solder fitting. The thread on the inside is a female 3/8” BSP-G thread. The height of the nut is 16mm and the central hole for this nut is 12,5mm. This brass...

This portafilter gasket has a outer diameter of 73mm a inner diameter of 57mm and a thickness of 8,5mm. 73x57x8,5mm. This type of brewing group gasket is one of the most standard portafilters around. You will find this on the Faema E61 groups as well as on the E61 style groups used by Vibiemme, La Scala, Bezzera, San Remo, Fiorenzato and Grimac. Of this...

The item on this page is a tube clamp. This clamp is used to clamp and hold in place exhaust tubing from various La Carimali brewing groups. The La Carimali part reference number for this item is 13.00070. This hose clamp is usable for hose diameter between 9,8mm +- 10,4mm. This hose clamp is made in Turkey. You can use this hose clamp on the Carimali...

The item on this product page is a OEM/original Grimac/Fiorenzato spare part. The Fiorenzato part reference numbers for this item are A1500010, A1500070 and A1500072 . For Grimac the part reference number is A1500072. This dosing device is a 230V version which can be used on 2 and 3 group espresso machines. The item has been made in Italy....

This motor is made by the Italian company RPM, It has a power ouput of 165W with 220/230V 50/60Hz. To start the motor up it uses a capacitor of 10 µf. The type of espresso machine pump used on this clamp ring motor is a clamp ring pump, where you use a stainless steel clamp to clamp the motor to the pump. Pumps suitable for this model are made by...

This push button board is a OEM/Original La Spaziale spare part. This item is used on the La Spaziale S40 espresso machine. This model has in total 5 buttons.The La Spaziale part reference number for this item is 09801 

This page shows the water level nut for a Astoria and Wega sight glass. This nut makes sure that the sight glass stays in place and seals properly. If the nut is screwed down the sight glass seal will slightly compress and seal off the sight glass. The part number for this item is for Astoria is 25383 and for Wega WY25383  This sight glass nut...