On this product page you will find various spare parts which can be used in the Hydraulic system of the Rancilio Epoca espresso machine. The items on this page are a combination of OEM/Original items, after market and generic spare parts.
The items shown on this page can be used on the Rancilio Epoca E 1 and Rancilio Epoca E2 as well on the Rancilio Epoca ST1 and the Rancilio ST2. The items you will find on this page can be items such as flowmeters, safety valves, water inlet solenoid valves, anti-vacuum valves, pressure sensors, gaskets.
Always make sure that the dimensions and part references match. Seen the Rancilio Epoca has been made over a longer period of time.
On this page you will find a three phase thermostat. This item is used in a variety of espresso machines. You can find this thermostat with brands like Cimbali Faema and Casadio. This 3 phase thermostat is made by the German company E.G.O. in Germany. The switching off temperature of this thermostat is 169°C and needs to be reset manually by pushing...
The flat copper gasket on this product page can be used with a variety of espresso machines and on various applications. You can use this copper gasket on espresso machines such as Marzocco, Casadio, ECM Heidelberg, La Scala, La Cimbali, Faema, Astoria, Wega, Nuova Simonelli, Wega and Rancilio. You will mainly see the use of this copper gasket to seal...
The most important part on a espresso machine is the safety valve. This part prevents that a boiler can explode. The safety valve will open up when the pressure inside the boiler becomes too high. This specific safety valve is made out of brass. The thread type used for this safety valve is 3/8”BSP-G. The calibrated pressure of the valve is 2.0...
The anti vacuum valve on this page is only used with the brands Rancilio and Promac, same company. The anti depression valve size is quite uncommon, the size used is mainly ¼”BSP-G instead of a 3/8” thread. The compatible Rancilio part number for this item is 10060050 This anti vacuum valve is made of stainless steel. The plunger...
On this product page you will find a Gicar flowmeter, what does a flowmeter do? Well if you have a timed touch panel, this flowmeter measures how much water is passing true. This is measured with a small wheel inside the flowmeter. This flowmeter is made by the Italian company Gicar and also made in Italy. This models grounds to it’s own body...
The boiler safety valve shown on this page can mainly be found on La Pavoni espresso machine boilers. The La Pavoni part reference for this item is 395221G This boiler safety valve has a male 3/8” BSP-G thread. The pre-set pressure is 1,8 bar and nonadjustable. The seal used is a FKM seal, when opened the steam outlet is 872 L/M. This valve is CE...
The product on this page is a gasket, a copper one. This copper gasket is a flat gasket, so not a compression gasket. This flat copper gasket is used in a variety of espresso machines and applications. You mainly see them in the category of steam and water valve or boiler components. This gasket has a outer diameter of 22mm a inner diameter of 17 and a...
The level probe on this product page is mainly used on Rancilio espresso machine boilers. The Rancilio part references for this item are 25110005, 34200086 and 34200088. This level probe has been manufactured by the Italian company Gicar, the part reference is 9.0.83.98G This level probe has a brass fitting, which has a male 1/8” BSP-G thread....
On this page you will find a injector tube for the Rancilio espresso machine. This injector tube has the Rancilio part number 21014234. This injector tube is placed at the bottom of the heat exchanger in the boiler. This part has a length of 127mm. The section which threads into the boiler has a 3/8” BSP-G thread. The threads which stick out of the...
Most espresso machine manufacturers use a mechanical pressure switch such as the Ma-ter XP110 and Asco (Sirai) pressure switches. But the pressure switch on this page is a digital pressure sensor and can control the machine digitally. The pressure sensor on this page is for Rancilio espresso machines. The part number for this sensor is 34200288. The...
On this page you will find a threaded 2 way solenoid valve. This solenoid valve is made by Parker, this item ahs been manufactured in Italy. This valve is mainly used as a boiler filling valve, due to the big size of Orifice. This valve has 2 female 1/8” BSP-G connections, the in as well as the outlet. The orifice of this valve is 2,5mm and the...
On this page you will find a stainless steel braided hose. This model of flexible hose is used in various Rancilio espresso machines, this hose goes from the main water line to the internal pump of the espresso machine. The Rancilio part reference for this item is 69000734. This specific model is suitable for the US market, seen it is NSF...
Cookie | Provider | Purpose | Expiry |
---|---|---|---|
PHP_SESSID | brooks-parts.com | The PHPSESSID cookie is native to PHP and allows websites to store serialised status data. On the website it is used to establish a user session and to pass state data through a temporary cookie, which is commonly known as a session cookie. These Cookies will only remain on your computer until you close your browser. | Session |
PrestaShop-# | brooks-parts.com | This is a cookie used by Prestashop to store information and keep the user's session open. It stores information such as currency, language, customer ID, among other data necessary for the proper functioning of the shop. | 480 hours |