Bezzera B2000 - Brewing group

In some cases, the shower screen is attached with a screw, in most cases that is a Philips or a slotted screw. It is difficult to remove it with a regular screwdriver due to the limited height under the brew group.  But for that you need a shortened slotted screwdriver, in this case the one from the German brand Wera, which fits well under the brewing...

The shower screen on this product page is from the type a precision shower screen or competition. This shower screen is made by the Italian company IMS Filtri and can be used on various espresso machine brands such as Astoria, Bezzera, Elektra, Casadio Faema, La Scala, Victoria Arduino. This model is Called the CI 35 WM, with the part reference number...

This 3 way solenoid valve is one of the most commonly found solenoid valves. The part is produced by Parker in Italy. This valve is mainly used as a brewing group solenoid valve. The remaining water from the group comes out of the outlet at the top. The Parker part numbers for this item are 393107J and 393112J This solenoid valve is a 3 way valve. The...

the portafilter gasket on this page is a OEM/Original Bezzera spare part. The Bezzera spare part reference for this item is 7493008. This item is dimension wise and optically the same as the portafilter gasket as in the accessory tab below. But what is the difference. This gasket has a shore number of 90 and the other gasket has a shore number of...

The o ring on this page has a cord diameter of 2,62mm and a internal diameter of 11,91mm and is made from EPDM. This specific model of o rings is mainly used in steam and water valves but can also be used in various brewing groups and boilers. This o ring is used in various steam and water valves of the brands La Carimali, San Remo, Nuova Simonelli, La...

Most of the pump driven espresso machines use a 3 way solenoid valve the control the brewing process. On this page you will find a ODE solenoid valve made by the Italian company ODE. The solenoid valve number is: 31A1AR15-VORV This specific model is a flanged model. So it is bolted against a flat machined surface with 4 allen bolts. These surfaces are...

On this page you will find a brass brewing group plug. The outer diameter of this plug is 18mm. This plug is used to seal off the nozzle/gigleur compartment. You will find this part on a variety of brewing groups. Brands like Bezzera (5288001) Brasilia (0210600004 ) la Pavoni (313600) and wega espresso machines. If you are not entirely sure if this...

The o ring on this product page can be used on various Bezzera brewing groups. The Bezzera part reference number for this item is 7496004. This o ring has been made from FKM. The cord diameter of this o ring is 3,53mm and the internal diameter is 32,93mm. You can use this o ring on the Bezzera B2000, Bezzera B2006, Bezzera b3000, Bezzera B2000MN,...

This screw is used to fix the shower screen on various espresso machine brands brewing groups. You can use this with various models of Bezzera, San Marco, Carimali, Faema, Pavoni, Elektra and Rancilio. The Bezzera part references are 0BMQ40, 5722220, 7817001. For Elektra it is 01206035, For Faema they are 4001045920 and 503605160 for Pavoni it...

When you want to clean your portafilter at the end of the day you need to remove the filter basket from the portafilter. But these baskets are normally held in place with the internal spring and can be difficult to remove. Instead of removing the basket with a spoon IMS Filtri has made a filter basket removal tool. This tool is made from stainless...

A lot of the filterbasket sizes are quite standardized. This IMS filterbasket is good example of this. The basket is made by IMS filtra, but it is a competition basket and not from the standard IMS basket line.  The IMS part number for this double filterbasket is B702TH24.5M. The double filterbasket is made from stainless steel 304, food safe. The...

It is quite common on espresso machines that the shower screen in the brewing group is attached with a screw. The issue is that the space between the brewing group and the drip tray is quite often too little for a normal screwdriver. For that reason we have the Wera short version screwdrivers. This specific model is suitable to use in combination with a...