0
My cart
Bezzera BZ07 Espresso Machine Parts – PM, DE, and PID Models
Bezzera chrome clamping ring
The item on this page is a OEM/original Bezzera spare part. This chrome plated clamping ring is used with a variety of domestic and commercial espresso machines.
At some point it can occur that your portafilter coupling doesn’t work that great anymore with your brewing group. Then you can replace it with this new one.
You can use this brewing...
€274.85
Bezzera switch SSR 7635424.01
The item on this product page is a Solid State Relay (SSR) which can be used on variety of Bezzera espresso machines. The part reference number for this item is 7635424.01
This SSR uses DC and AC power. The input side is 4-32V DC, and the load side can hold up to 25A at 250V.Seen the input side is DC you need to make sure that you have the polarity...
€67.62
Knob M8x1,25mm
This small rounded off knob is used on steam and water valves, but also on handles of brewing groups. You can find this handle on a variety of brands such as Vibiemme, Wega, Astoria, Grimac, and ECM Heidelberg.
This black knob has a high gloss finish. The thread inside is a M8 with a pitch of 1,25mm. The item has been made in Italy.
You can use this...
€9.43
Wera shower screen screwdriver philips
It is quite common on espresso machines that the shower screen in the brewing group is attached with a screw. The issue is that the space between the brewing group and the drip tray is quite often too little for a normal screwdriver. For that reason we have the Wera short version screwdrivers. This specific model is suitable to use in combination with a...
€12.87
Bezzera heating element 1200W 110/120V
On this product page you will find a bit more oddly shaped heating element. This heating element can be used on various Bezzera single group espresso machines. The Bezzera part reference for this heating element is 5721128
This heating element produces 1200W at 110/120V. there are 2 connecting poles. The immersed depth of the heating element is 46mm....
€82.92
Bezzera brewing group gasket 75x47x1,5mm original
This brewing group gasket is used between the brewing group and the frame of the espresso machine. this gasket is not intended to keep any water out, just not make contact between the brewing group and the frame. This gasket is a OEM/original Bezzera spare part and it has the part reference number 7493013.
This flat gasket has a length of 75mm and a...
€3.05
Olab solenoid valve 2 way 1/8” 230V
This solenoid valve is made by the company Olab. This specific valve is a 2 way valve which is used to control the flow of water. This specific model can be used on a variety of Bezzera espresso machines. This valve is compatible with the Bezzera part reference numbers 7702322 and 7702322.01. This valve is Olab K08198-B-B
This solenoid valve has on the...
€92.70
ODE solenoid valve 3 way 1/8” 230V 5W
The item on this page is a 3 way solenoid valve made by the Italian brand ODE. This valve can be used on a variety of domestic Bezzera espresso machines. It is compatible with the Bezzera part references 7702305 and 7702316.
This 3 way solenoid valve has a female in and outlet, which has a 1/8” BSP-G thread. The coil is a 5W 230V model. The thread on the...
€47.97
Bezzera portafilter gasket silicone 73x57x7,5mm original
The gasket on this page is a silicone portafilter gasket used on a variety of Bezzera espresso machines, mainly the ones for domestic use. This specific model of gasket is a OEM/original spare part and has the Bezzera part reference number 7493022.
The gasket has a outer diameter of 73mm a inner diameter of 57mm and a thickness of 7,5mm. There are 3...
€10.71
Bezzera solenoid valve drain fitting
The item on this page is a Bezzera solenoid valve discharge fitting and tube. This spare part is a OEM/original Bezzera spare part and has the part reference numbers 5194559, 5194559LL, 5194560LL and 5370313.
The fitting is screwed on the bottom of the solenoid valve where the exhaust port is located. The threads are a female 1/8”. Over the fitting you...
€9.20
Bezzera dosing device 30uZ 3L S.T. 230Vac
On this product page you will find a dosing device suitable for various Bezzera espresso machines. The Bezzera part references for this item are 7662651.01 and 7662616. The Gicar code for this item are 9.5.17.73 and 9.5.17.73G
This dosing device can be used on the Bezzera BZ07, Bezzera BZ13, Bezzera BZ35 and Bezzera BZ40. This device is only...
€298.52
Bezzera lever microswitch
The microswitch on this page is a model which is used with various Bezzera espresso machines. The Bezzera part reference for this item is 7633907
This microswitch has a small roller, instead of just a push button. The maximum amp rating for switch is 16A a t 250V. This switch has been made in Italy.
You can find this switch on the Bezzera BZ07, Bezzera...
€33.86
Bezzera Level regulator 1 probe 220/240V
The level regulator on this product page is a OEM/Original Bezzera spare part and used on various models. The Bezzera part reference number for this item is 7661036.01PR. Note: this item has been replaced with Bezzera 7661007.01R
This unit runs on 220-240V AC and is suitable for 1 temperature probe. This unit is made in Italy.
You can use this original...
€168.27
Bezzera BZ07/BZ10 Pressure switch kit 230V
The item on this page is a OEM/Original Bezzera electronic kit for various older domestic Bezzera espresso machines. The Bezzera part reference for this item is 7433017R.
This kit is made up out of 3 items, the wiring loom, the relay and the pressure switch. The Pressure switch is a Ma-ter C110P which has been set at 2,3bar and is rated up to 15A at...
€238.09
Bezzera steam water valve pin
This stainless steel pin is a OEM/Original Bezzera spare part. This pin transfers on the steam and water valve a vertical motion to a horizontal motion. This pin has the Bezzera part reference 5225610.
This stainless steel pin has a overall length of 33,6mm. The head has a diameter of 14mm and the thread used is a male M8.
You can use this stainless...
€19.03
Bezzera steam water shaft 12x47mm
This steam and water valve shaft pin is a OEM/Original Bezzera spare part. The Bezzera part reference for this item is 5260204DL.
This stainless-steel steam and water tap pin has a overall length of 47,5mm. The head of this shaft has a outer diameter of 12mm and a height of 5mm. At the other side of the shaft is a male M4 thread.
This valve shaft can be...
€31.24
Bezzera brewing group heating element 100W 230V original
The heating element on this page is slightly different than a standard boiler heating element. This specific model is used to keep the brewing group at a certain temperature. This will result in better temperature stability of the water flowing true the brewing group.
This item is a OEM/original spare part and the Bezzera part reference number is...
€87.00
Bezzera water tank cover original
The water tank on the back of the espresso machine is covered with a a small stainless steel plate. This item is a OEM/original Bezzera spare part, the part reference number for this item is 5073020LW
The plate is made of stainless steel, it has a width of 106mm and the length is 243mm.
You can use this item on various Bezzera models such as the BZ07,...
€29.27
Bezzera OEM water tank suction line filter
It is always possible that there is some sort of a foreign debris is in the water tank of your Bezzera espresso machine. But you don’t want that this enters your hydraulic system of your espresso machine. For that reason you can use a wire mesh filter. This water filter is a OEM/original Bezzera spare part and has the part reference number 7374015.
This...
€3.58
Bezzera protective cover switch
This switch can be used on the rocker switch used on various Bezzera espresso machines. This nut can be screwed on the threads of the switch. This switch cover is a OEM/original Bezzera spare part, the part reference is 7372507.
This part is made up of 2 sections. The rubber flexible part which moves and a nickel plated nut. This item is made in Italy....
€7.05
Bezzera BZ07/BZ10/BZ13 boiler original
The boiler on this product page is used on various Bezzera espresso machines. This boiler is a OEM/original Bezzera spare part and has the part reference number 5320520BL-AL.
This specific boiler is used on the Bezzera BZ07, BZ10, BZ13 and the Crema. Make sure that the part reference number matches your boiler.
€308.92
Bezzera BZ07 Models
The Bezzera BZ07 is available in the following versions:
- Bezzera BZ07 PM
- Bezzera BZ07 PM PID
- Bezzera BZ07 DE
- Bezzera BZ07 DE PID
Bezzera BZ07 PM & BZ07 DE
The Bezzera BZ07 PM is the basic manual version of the machine, where the brewing process is controlled by manually starting and stopping the shot. This model is ideal for home baristas who prefer hands-on control over the brewing process.
The Bezzera BZ07 DE, on the other hand, is the volumetric version, which allows users to pre-set and automatically control the volume of water used for each shot. This makes the brewing process more consistent and efficient, ideal for those looking for convenience and precision.
PID Versions
Both the PM and DE models of the Bezzera BZ07 are available with PID temperature control. The PID version uses a temperature probe instead of the traditional pressure switch, providing more precise control over the brewing temperature. This feature ensures stable temperatures for optimal espresso extraction.
Water Supply Options: R vs. S Versions
The Bezzera BZ07 also comes in R and S versions:
- The R version is connected directly to the main water line, allowing continuous water supply without needing to refill a tank.
- The S version has a 3-liter water tank at the back of the machine, making it ideal for setups where a direct water line is not available.
Boiler and Heating Element
The Bezzera BZ07 is equipped with a 1.5-liter boiler and a 1200W heating element, providing enough power to maintain stable steam and water temperatures during use. The machine is available in both 110/120V and 220/240V configurations, making it suitable for use in various regions.
Conclusion
The Bezzera BZ07 espresso machine offers a wide range of options for home baristas, from manual to volumetric dosing and traditional pressure control to PID temperature control. Whether you choose the R version for direct water line connection or the S version with a tank, this machine delivers reliable performance. Brooks Parts provides a full range of spare parts to ensure your Bezzera BZ07 operates at its best.