This genuine OEM Bezzera power relay, manufactured by Finder (model 66.82.8.240.0000), is designed for reliable operation in high-load circuits. Featuring two 30A changeover contacts and a 240V coil, it ensures consistent performance in demanding espresso machine environments. Made in Spain.
Looking for similar items or different specifications for this Bezzera OEM 7635422 Power Relay Finder 66.82.8.240.0000?
Explore our full range in the Bezzera category
*
This is a OEM/original spare part. Part numbers are always leading.
This OEM conical seal is made from high-quality PTFE and is used for water and steam pipe connections in a wide range of Bezzera espresso machines. Measuring ø13x6x6 mm, it ensures a secure and heat-resistant seal that helps maintain pressure and prevents leaks.
OEM part for Bezzera machines
Material: PTFE (polytetrafluoroethylene)
Dimensions: ø13...
This espresso machine motor is made by the Italian company RPM (model number 11002728). The motor itself has 165W with 230V 50/60hz. To power the motor up it has a capacitor of 10 µf. This is one of the more standardized espresso machine motors and is being used by a variety of coffee machine manufacturers. This ranges from brands like Astoria, Brasilia,...
This item is a heat exchanger (HX) which is installed vertically inside the boiler of the espresso machine. This specific HX is a OEM/original Bezzera spare part and has the part reference number 5329020DC-AL.
This HX is made from a copper tube and a brass fitting which have been soldered together. The thread is a 1” male connection. Inside the brass...
On this page you will find a touch panel which is suitable for a variety of Bezzera espresso machines. The Bezzera part reference for this item is 7665001. The unit has been made by the Italian company Gicar, their part reference is 9.9.12.01 and 9.9.12.01G
This touch panel has in total 5 keys. 4 are for the pre-set volumetric dosing. The last one is the...
On this product page you will find a shower diffuser plate for various Bezzera brewing groups. The Bezzera part references for this item are 5285501 and 5285501TP.
This shower screen holder and diffuser has a outer diameter of 57mm. The thickness of this brass diffuser plate is 7,5mm. The hole diameter is 5,5mm. This item has been made in Italy....
The most important part on a espresso machine is the safety valve. This part prevents that a boiler can explode. The safety valve will open up when the pressure inside the boiler becomes too high.
This specific safety valve is made out of brass. The thread type used for this safety valve is 3/8”BSP-G. The calibrated pressure of the valve is 2.0 bar, this...
The flowmeter on this page is one of the most commonly used flowmeters in espresso machines. This flowmeter has been manufactured by the Italian company Gicar, so also made in Italy. In the extra field tab next to this text you will see a entire list of compatibilities with other models and brands.
This specific flowmeter does not come with a fixed wire,...
It is quite common on espresso machines that the shower screen in the brewing group is attached with a screw. The issue is that the space between the brewing group and the drip tray is quite often too little for a normal screwdriver. For that reason we have the Wera short version screwdrivers. This specific model is suitable to use in combination with a...