The spring on this page is a doser return spring. This spring is used on various brands of the La Cimbali Group. You can find them with doser coffee grinders of Casadio, Cimbali and Faema. The part references for this item can be found in the extra info tab.
This spring makes sure that the dosing lever returns to it’s original position. This article has been made in Italy.
You can use this doser spring on the Casadio Theo 64, Casadio Theo 84, Casadio Theo Conic, Casadio Enea, Cimbali Magnum and the Faema MD2000 and the Faema MD3000.
The item on this product page is a spring guide used on various older models of steam and water valve on Rancilio espresso machines. The Rancilio part reference number is 23123010.
This spring guide is made from machined brass. The item itself has been made in Italy.
You can use this compression ring on the Rancilio S20, Rancilio Z9, Rancilio Z11,...
The switch on this page is a black bipolar switch with a red indicator light. This switch can be used on San Marco, Grimac, Astoria and Wega espresso machines and grinders. Their part references are for Astoria 18263, Grimac A2100093, San Marco 108539 and for Wega WY18263.
This bipolar switch is black with a red indicator light, this light burns...
The heating element gasket on this page can be used on various Gaggia and La Pavoni heating elements. The Gaggia part reference for this gasket is 4027001000 and for La Pavoni the reference is 361000
This gasket is made from a fibre material. The outer dimensions are 70x70mm and a thickness of 2mm. the internal hole is 40mm.
On this product page you will find a touchpanel membrane for the Faema E98 espresso machine. The part reference for this item is 3301134927.
This touchpanel membrane has in total 5 pre-set volumetric keys. The bottom key is the continuous and the programming key. With this programming key you can adjust the volumetric keys. This item has been made in...
On this product page you will find a portafilter suitable for various La Cimbali espresso machines. This model has the old type of spout which uses screws to keep it into place. The Cimbali part reference for this item is 458-981-000.
This portafilter has a ear orientation of 90 degree. The ears themselves have a thickness of 5,5mm. The portafilter does...
In some cases, the shower screen is attached with a screw, in most cases that is a Philips or a slotted screw. It is difficult to remove it with a regular screwdriver due to the limited height under the brew group.
But for that you need a shortened slotted screwdriver, in this case the one from the German brand Wera, which fits well under the brewing...
The item shown on this page is not a shower screen holder, but just a diffuser. It can be used on various espresso machine models of the La Cimbali group. The Casadio part reference for this item is 457341008, the Cimbali part reference is 457-341-008 and the Faema reference is 457341008.
This shower screen diffuser has a outer diameter of 56mm a...
