Parts for Comenda LB200, LB215, LB260 and LB275
The LB200, LB215, LB260 and LB275 form a recognisable family of professional Comenda glasswashers. Many components are used across several models, which is helpful when maintaining older machines, but there can still be important differences between individual versions.
Besides the standard model names, spare-parts applications may include configurations such as LB200-2, LB215-2, LB260-2 and LB275-2 as well as M, C, A or RCD versions.
Common Comenda LB replacement parts include:
- Wash pumps and pump components
- Drain pumps
- Boiler and tank heating elements
- Wash arms and rinse arms
- Spray jets and arm supports
- Pressure switches
- Solenoid valves
- Thermostats and temperature controls
- Rinse-aid and detergent dosing parts
- Filters and overflow components
- Door parts and microswitches
- Seals, O-rings and pump gaskets
- Capacitors, switches and electrical components
Comenda LB wash pumps and water circulation
The wash pump is one of the most important components in a professional glasswasher. It circulates water through the wash arms and provides the pressure required to remove drink residue, lipstick, grease and other contamination from glassware.
In a busy bar or restaurant, an LB glasswasher can complete many short cycles during a single service. This places continuous load on the pump motor, impeller, bearings and mechanical seal.
Reduced spray pressure, poor washing results, unusual noise or leakage can indicate wear somewhere in the pump or hydraulic system.
Before replacing a complete pump, it is also worth checking filters, hoses, arm jets and seals. Restricted water flow elsewhere in the machine can create symptoms that resemble pump failure.
Drain pumps for Comenda LB glasswashers
Efficient drainage is particularly important on compact glasswashers because the machine must be ready for the next cycle quickly. Depending on the LB version, a drain pump is used to remove the wash water at the correct stage of the programme.
A worn or blocked drain pump can cause slow drainage, leave water in the tank or prevent the machine from completing the programme correctly.
When checking a drainage problem, inspect the pump together with the drain hose, filters and any foreign material that could restrict the water path.
Comenda LB heating elements and boiler parts
Professional glasswashing relies on controlled water temperatures. Comenda LB machines use heating components for the wash tank and/or boiler to reach the temperatures required for effective washing and rinsing.
A failed or heavily scaled heating element may result in slow heating, an insufficient rinse temperature or a machine that fails to reach its normal operating condition.
Limescale deserves particular attention in glasswashers. Mineral deposits reduce heat transfer and can place additional thermal stress on the element.
When selecting a Comenda LB heating element, compare the original part number, voltage, wattage, flange dimensions, immersion depth and electrical connections.
Wash arms and rinse arms for Comenda LB200–LB275
Clean glassware depends on even water distribution. The wash and rinse arms must rotate freely and their jets need to remain clear of scale and debris.
Blocked nozzles or worn arm supports can cause an uneven spray pattern. This may result in glasses coming out clean on one side of the rack but with residue or marks on another.
Depending on the condition of the system, repairs may involve a complete wash-arm assembly, individual jets, arm supports, bushings or rinse components.
Regular cleaning of the spray system is one of the simplest ways to maintain good washing performance and reduce unnecessary load on the pump.
Pressure switches and water-level control
A Comenda LB glasswasher must maintain the correct amount of water in the tank. Pressure switches and associated hoses help the machine detect and control the water level.
If a pressure switch becomes defective or its pressure hose becomes blocked, the machine may fill incorrectly, stop during the programme or operate with too much or too little water.
Pressure switches can differ in calibration and electrical specification. Always compare the switching values and OEM reference before ordering a replacement.
Comenda LB solenoid valves and water inlet parts
Solenoid valves control the incoming water supply. A valve that opens poorly can cause slow filling, while a valve that no longer closes correctly can allow excess water into the machine.
Scale and small particles from the water supply can gradually affect the valve mechanism. Before replacing the complete valve, check the inlet filter, electrical coil and water pressure as well.
Dosing parts for detergent and rinse aid
Chemical dosing is especially important when washing glassware. Too little detergent can leave residues, while incorrect rinse-aid dosing can result in spotting, streaks or poor drying.
Depending on the machine configuration, Comenda LB glasswashers can use hydraulic or electrical dosing components for rinse aid and detergent.
When diagnosing a dosing problem, inspect the pump, dosing tubes, non-return valves and connections. Tubes can harden or become blocked over time even when the dosing unit itself remains functional.
Comenda LB seals, gaskets and door components
Compact glasswashers complete many opening, closing, filling and draining cycles. Door components, seals and microswitches therefore experience repeated mechanical use.
Door seals, pump gaskets and O-rings also remain in regular contact with hot water and detergent. When these materials become hard, flattened or damaged, leakage can occur.
Replacing a worn seal early can prevent water from reaching motors, wiring or other electrical components.
Electrical components for Comenda LB glasswashers
Pumps, heating elements and filling systems rely on various electrical and electromechanical components. Depending on the LB version, service work may involve capacitors, thermostats, switches, microswitches, contactors or other controls.
Older LB machines can exist in several technical versions, so electrical components should never be selected from appearance alone.
Always verify voltage, frequency, electrical rating, terminal layout and the original Comenda reference.
Finding the correct part for your Comenda LB model
One of the most important points when ordering parts for an LB glasswasher is identifying the complete machine version. An LB260 and an LB260A may share many components, but this does not mean every part is interchangeable.
Before ordering, check:
- The complete Comenda model designation
- Any suffix such as A, M, C or RCD
- The machine data plate
- The original Comenda/OEM part number
- Voltage and wattage for electrical parts
- Dimensions and connection sizes
- Specifications printed on the original component
Whenever an original part number is available, use it as the primary reference for compatibility.
Maintaining Comenda LB glasswashers
Professional glasswashers often work hardest during the busiest part of the day. Regular maintenance can therefore prevent a relatively small problem from turning into an unexpected breakdown during service.
Clean filters, wash arms and rinse jets frequently. Check the pump, seals, dosing system and heating components periodically, and pay particular attention to limescale where hard water is present.
Replacing known wear parts before complete failure can help keep an older LB200, LB215, LB260 or LB275 operating reliably for considerably longer.
More Comenda dishwasher and glasswasher parts
For parts covering other Comenda machines, visit our main Comenda dishwasher parts category.
You can also explore Comenda LF parts, Comenda LC parts and Comenda F and FC parts.
Why order Comenda LB parts from Brooks Parts?
Brooks Parts specialises in replacement components for professional catering and warewashing equipment. Our range includes parts for several Comenda LB glasswasher models and versions that remain in use throughout the hospitality industry.
Whether you need a drain pump for an LB200, a heating element for an LB215, a wash-arm component for an LB260 or a valve or seal for an LB275, correct identification is essential for a reliable repair.
Explore our range of Comenda LB spare parts and use the complete model designation, technical specifications and original part number to identify the correct replacement component.
