Looking for similar items or different specifications for this Copper gasket 20x24x1,5mm?
Explore our full range in the Grimac, La Scala, Sanremo categories
*
This part is compatible to the original part number. Part numbers are always leading.
Details
50-572-8V12240
15 Items
Data sheet
Copper Gasket Type
Flat
Inner diameter (ID)
20mm
Outer diameter (OD)
24mm
Thickness
1.5mm
Type
Compatible (non-original)
Review
Comments (0)
No customer reviews for the moment.
Your review appreciation cannot be sent
Report comment
Are you sure that you want to report this comment?
Report sent
Your report has been submitted and will be considered by a moderator.
Your report cannot be sent
Write your review
Review sent
Your comment has been submitted and will be available once approved by a moderator.
The item on this page is silicone grease made by the company Molykote. This type of silicone is called Molykote 111 compount. This silicone grease is NSF certified and can be used in drinking water systems.
Maintaining your espresso machine properly is one of the most important things to keep your espresso machine in good condition. This means lubricating...
The grease on this product page is made by the German company Kluber. The type of grease is called Klubersynth UH1 14-151. This is a food safe grease which is ideal to use on components such as steam and water valves.
The grease is packed in a tube of 45grams. The temperature reach of the grease is minus 45 degree and + 120 degree Celsius. The grease has...
This chrome plated drain valve is used on a variety of espresso machine brands and models which use the E61 style brewing group. The item has a overall length of 26mm and a male thread of ½”. The drain fitting holds the drain jet in place, this part is used a spring support for the drain valve spring.
This coffee machine part for the E61 style group is...
The expansion valve gasket shown on this page is a generic item. You can find it in the catalogue of a variety of espresso machine manufacturers.
The gasket is a flat NBR gasket with a pin at the end. The widest section of the gasket has a diameter of 15mm and the pin has a diameter of 6mm. The total height for the gasket is 10mm.
Which espresso machine...
the item on this product page is a stainless steel split pin. This pin can be used on various steam and water valves used on Marzocco, Carimali, San Remo, Faema and La Scala espresso machines. The Carimali part reference number is 94.00092, the Faema part reference number is 4061024965, the Marzocco number is L165/8 and the San Remo part reference number...
The portafilter on this product page is a bottomless portafilter which can be used on a variety of Vibiemme brewing groups. This is the case for the commercial and the domestic espresso machine models.
This portafilter has no spout, but a bottom which has been cut out. The ear orientation is 90 degree and the thickness of the ears is 5,5mm. The...
This contact thermostat has a shut off temperature at 165 °celcius. In this case it is a manual espresso machine thermostat. That means that it needs to be pushed manually to reset. With a automatic one it will reset itself.
On the bottom of this thermostat is a M4 male screw thread. You can screw the thermostat into a boiler for instance. For a brewing...
This steam and water valve is one of the most common models found on commercial espresso machines. They can be found on brands such as San Remo, La Scala, ECM and Brasilia espresso machines.
This steam and water valve has on the inlet side a conical shape, so for flared tubing. This valve has been manufactured in Italy.
You can find this steam and water...
The o ring on this page is used to seal off the steam tip from the steam wand at the bottom. You can find this o ring with a variety of brands like Spaziale, Astoria and Wega espresso machines. With the part numbers of Spaziale 08354, Astoria 12300013 and Wega WY12300013.
This o ring has a cord diameter of 1,2mm and a internal diameter of 6mm. The o...
The item on this page is a water inlet pin used on various Vibiemme espresso machine models. This item is a OEM/Original VBM spare part. The Vibiemme spare part reference number for this item is ASTARUBCARICO.
This water inlet pin has a length of 46mm. the pin itself has been made in Italy.
You can use this pin on the Vibiemme Cubo, Vibiemme Dosaplus,...