This fibre sealing ring is used in De Jong Duke vending machines to seal a connection in the water or pressure system. It is usually replaced when the seal is worn, compressed, damaged or causes leakage at the connection.
Product details
Brand: De Jong Duke
OEM part number: 4BPR031
Product type: Sealing ring
Material: Fibre
Dimensions: 10 x 14 x 1 mm
Application: Vending machine water or pressure system
Made in Germany
Compatibility
De Jong Duke
Vending machine:
Avy series:
Avy-CoEx-Medium (20220901-)
Avy-CoEx-Small (20220901-)
Avy-CoExXL-Medium (20220901-)
Blu series:
Blu-CoEx-Medium (20220913-)
Blu-CoEx-Small (20220913-)
Blu-CoExXL-Medium (20220913-)
Blu-CoExXL-Small (20220913-)
Edge series:
Edge-Small-CoEx (9CNDQ)
Edge-Small-CoExXL (9XNAQ)
Lua series:
Lua-CoEx-Small (20220916-)
Lua-CoExXL-Medium (20220916-)
Lua-CoExXL-Small (20220916-)
Nio series:
Nio-CoEx (9CKA)
Nio-CoExXL (20220916-)
SiroTouch series:
SiroTouch-Medium-CoEx (9CECH)
SiroTouch-Small-CoEx (9CNDH)
Varea series:
Varea-Medium-CoEx (9CECK)
Varea-Medium-CoExXL (9XEAK)
Varea-Small-CoEx (9CND)
Varea-Small-CoExXL (9XNAK)
Veco series:
Veco-CoEx-Medium (20220913-)
Veco-CoEx-Small (20220913-)
Veco-CoExXL-Medium (20220913-)
Veco-CoExXL-Small (20220913-)
Virtu series:
Virtu-CoExXL-Medium (20220913-)
Virtu-Medium-CoEx (9CECK)
Virtu-Small-CoEx (9CNDK)
Virtu-Small-CoExXL (9XNAK)
Zia series:
Zia-Medium-CoEx (9CECP)
Zia-Medium-CoExXL (9XEAP)
Zia-Small-CoEx (9CNDP)
Zia-Small-CoExXL (9XNAP)
Looking for similar items or different specifications for this De Jong Duke OEM 4BPR031 Fibre Sealing Ring 10 x 14 x 1 mm?
Explore our full range in the Vending category
*
This is a OEM/original spare part. Part numbers are always leading.
Details
65-861-5976484
Review
Comments (0)
No customer reviews for the moment.
Your review appreciation cannot be sent
Report comment
Are you sure that you want to report this comment?
Report sent
Your report has been submitted and will be considered by a moderator.
Your report cannot be sent
Write your review
Review sent
Your comment has been submitted and will be available once approved by a moderator.
This conveyor mixer fan is used in the mixer section of De Jong Duke vending machines to help move and mix instant product during preparation. It is usually replaced when the fan is worn, damaged, loose or no longer mixes correctly.
Product details
Brand: De Jong Duke
OEM part number: 4KMX019
Product type: Conveyor mixer fan
External...
This 10-button push-button panel is used in the front control section of compatible Necta Vending Evoca vending machines. It is usually replaced when the original panel is worn, damaged, cracked, unresponsive, or no longer operates the buttons correctly.
Product details
Brand: Necta Vending
Product type: Push-button panel
Number of...
This 12-button push-button panel membrane is used in the front control panel section of compatible Necta Vending Evoca vending machines. It is usually replaced when the original membrane is worn, cracked, damaged, unresponsive, or no longer protects or identifies the buttons correctly.
Product details
Brand: Necta Vending Evoca
Product type:...
This pre-mounted water unit is used in compatible Sielaff vending machines as part of the machine’s water circuit. It is usually replaced when the existing water unit is leaking, blocked, damaged, or no longer supplies water correctly.
Product details
Brand: Sielaff
OEM part number: 4170102000
Product type: Pre-mounted water unit...
This red stop fitting is used on the stainless steel boiler section of De Jong Duke vending machines. It is usually replaced when the fitting is worn, damaged, leaking or no longer seals correctly in the boiler assembly.
Product details
Brand: De Jong Duke
OEM part number: 5RDT005
Product type: Stop fitting
Application: Stainless...
This cross-piece for piston holder is used in the coffee group of compatible Necta Vending Evoca vending machines. It is usually replaced when the original cross-piece is worn, cracked, damaged, loose, or no longer supports the piston holder correctly.
Product details
Brand: Necta Vending
Product type: Cross-piece for piston holder...
This assembled HMI display is used as the operator interface in Sielaff equipment. It is usually replaced when the display is damaged, no longer responds correctly, has visibility issues, or has faults in the programmed interface.
Product details
Brand: Sielaff
OEM part number: 4140855598
Product type: Assembled HMI display
Version:...
This OEM cup container is used to store and feed 12 oz cups in compatible Necta Vending Evoca machines. It is usually replaced when the original container is cracked, worn, damaged, deformed, or no longer guides the cups correctly.
Product details
Brand: Necta Vending
Product type: Cup container
Cup size: 12 oz
Part type: OEM...