This volumetric counter is used in De Jong Duke vending machines to measure water flow in the machine system. It is usually replaced when flow measurement becomes inaccurate, the Hall sensor fails, the counter blocks or the machine gives dosing or flow-related faults.
Product details
Brand: De Jong Duke
OEM part number: 4ESE008
Product type: Volumetric counter
Version: 932-9552-B NSF
Inlet/outlet fitting: Hose-end fitting ø 7 mm
Nozzle: ø 1.8 mm
Sensor: Special Hall sensor
Power supply: Up to 24 V DC
Fixing: Elbow
Application: Vending machine
Made in Switzerland
Compatibility
De Jong Duke
Vending machine:
Avy series:
Avy-CoEx-Medium (20220901-)
Avy-CoEx-Small (20220901-)
Avy-CoExXL-Medium (20220901-)
Blu series:
Blu-CoEx-Medium (20220913-)
Blu-CoEx-Small (20220913-)
Blu-CoExXL-Medium (20220913-)
Blu-CoExXL-Small (20220913-)
Edge series:
Edge-Small-CoEx (9CNDQ)
Edge-Small-CoExXL (9XNAQ)
Lua series:
Lua-CoEx-Small (20220916-)
Lua-CoExXL-Medium (20220916-)
Lua-CoExXL-Small (20220916-)
Nio series:
Nio-CoEx (9CKA)
Nio-CoExXL (20220916-)
SiroTouch series:
SiroTouch-Medium-CoEx (9CECH)
SiroTouch-Small-CoEx (9CNDH)
Varea series:
Varea-Medium-CoEx (9CECK)
Varea-Medium-CoExXL (9XEAK)
Varea-Small-CoEx (9CND)
Varea-Small-CoExXL (9XNAK)
Veco series:
Veco-CoEx-Medium (20220913-)
Veco-CoEx-Small (20220913-)
Veco-CoExXL-Medium (20220913-)
Veco-CoExXL-Small (20220913-)
Virtu series:
Virtu-CoExXL-Medium (20220913-)
Virtu-Medium-CoEx (9CECK)
Virtu-Small-CoEx (9CNDK)
Virtu-Small-CoExXL (9XNAK)
Zia series:
Zia-Medium-CoEx (9CECP)
Zia-Medium-CoExXL (9XEAP)
Zia-Small-CoEx (9CNDP)
Zia-Small-CoExXL (9XNAP)
Looking for similar items or different specifications for this De Jong Duke OEM 4ESE008 Volumetric Counter NSF?
Explore our full range in the Vending category
*
This is a OEM/original spare part. Part numbers are always leading.
Details
65-812-3455566
Review
Comments (0)
No customer reviews for the moment.
Your review appreciation cannot be sent
Report comment
Are you sure that you want to report this comment?
Report sent
Your report has been submitted and will be considered by a moderator.
Your report cannot be sent
Write your review
Review sent
Your comment has been submitted and will be available once approved by a moderator.
This mounted carrier is used for the mains connection section in compatible Sielaff vending machines. It is usually replaced when the carrier is damaged, bent, loose, incomplete, or no longer supports the mains connection correctly.
Product details
Brand: Sielaff
OEM part number: 7040162600
Product type: Mounted carrier for mains...
This LH spiral is used in Crane MS vending machines to move and dispense products from the vending tray. It is usually replaced when the spiral is bent, worn, damaged or no longer releases products correctly.
Product details
Brand: Crane MS
Part number: 1707058
Product type: Spiral
Spiral type: 2.57 7 LH
Compatibility
Crane...
This chamber bottom seal is used in the chamber section of compatible Necta Vending Evoca vending machines. It is usually replaced when the original seal is worn, damaged, leaking, hardened, or no longer seals the chamber correctly.
Product details
Brand: Necta Vending
Product type: Chamber bottom seal
Compatibility
Necta Vending...
This cable harness is used to connect the VMC, display and service key section in compatible Sielaff vending machines. It is usually replaced when the wiring is damaged, worn, has connection faults, or no longer provides reliable signal transmission.
Product details
Brand: Sielaff
OEM part number: 3190050700
Product type: Cable harness...
This fixing ring nut assembly is used on the mixer section of De Jong Duke vending machines to secure the mixer components in place. It is usually replaced when the original ring nut is damaged, worn, loose or no longer holds the mixer assembly correctly.
Product details
Brand: De Jong Duke
OEM part number: 4KMX026
Product type: Fixing...
This complete mounted drive shaft is used in the drive section of compatible Sielaff GF Robimat vending machines. It is usually replaced when the shaft is worn, bent, damaged, or no longer transfers movement correctly.
Product details
Brand: Sielaff
OEM part number: 7040321200
Product type: Complete mounted drive shaft
Made in...
This 0.33 L slim can plate is used in the product dispensing or storage section of compatible Necta Vending Evoca vending machines. It is usually replaced when the original plate is worn, bent, damaged, missing, or no longer holds slim cans correctly.
Product details
Brand: Necta Vending
Product type: Slim can plate
Capacity: 0.33 L...
This board is used in the carbonated chiller system of De Jong Duke machines. It is usually replaced when the board is damaged, communication faults occur or the connected chiller functions no longer respond correctly.
Product details
Brand: De Jong Duke
OEM part number: 4EPR026
Product type: Board
Application: Carbonated chiller...