This expansion valve is used in De Jong Duke vending machines to control pressure in the water circuit. It is usually replaced when the valve leaks, no longer holds the correct pressure, or causes pressure-related faults in the machine.
Product details
Brand: De Jong Duke
OEM part number: 4MPF084
Product type: Expansion valve
Pressure: 2 bar
Fitting: ø 1/8"M
Hose-end fitting: ø 8 mm
Application: Vending machine
Made in Czech Republic
Compatibility
De Jong Duke
Vending machine:
Avy series:
Avy-CoEx-Medium (20220901-)
Avy-CoEx-Small (20220901-)
Avy-CoExXL-Medium (20220901-)
Blu series:
Blu-CoEx-Medium (20220913-)
Blu-CoEx-Small (20220913-)
Blu-CoExXL-Medium (20220913-)
Blu-CoExXL-Small (20220913-)
Edge series:
Edge-Small-CoEx (9CNDQ)
Edge-Small-CoExXL (9XNAQ)
Lua series:
Lua-CoEx-Small (20220916-)
Lua-CoExXL-Medium (20220916-)
Lua-CoExXL-Small (20220916-)
Nio series:
Nio-CoEx (9CKA)
Nio-CoExXL (20220916-)
SiroTouch series:
SiroTouch-Medium-CoEx (9CECH)
SiroTouch-Small-CoEx (9CNDH)
Varea series:
Varea-Medium-CoEx (9CECK)
Varea-Medium-CoExXL (9XEAK)
Varea-Small-CoEx (9CND)
Varea-Small-CoExXL (9XNAK)
Veco series:
Veco-CoEx-Medium (20220913-)
Veco-CoEx-Small (20220913-)
Veco-CoExXL-Medium (20220913-)
Veco-CoExXL-Small (20220913-)
Virtu series:
Virtu-CoExXL-Medium (20220913-)
Virtu-Medium-CoEx (9CECK)
Virtu-Small-CoEx (9CNDK)
Virtu-Small-CoExXL (9XNAK)
Zia series:
Zia-Medium-CoEx (9CECP)
Zia-Medium-CoExXL (9XEAP)
Zia-Small-CoEx (9CNDP)
Zia-Small-CoExXL (9XNAP)
Looking for similar items or different specifications for this De Jong Duke OEM 4MPF084 Expansion Valve 2 Bar?
Explore our full range in the Vending, De Jong Duke, De Jong Duke Virtu categories
*
This is a OEM/original spare part. Part numbers are always leading.
Details
65-780-1720044
Review
Comments (0)
No customer reviews for the moment.
Your review appreciation cannot be sent
Report comment
Are you sure that you want to report this comment?
Report sent
Your report has been submitted and will be considered by a moderator.
Your report cannot be sent
Write your review
Review sent
Your comment has been submitted and will be available once approved by a moderator.
This T-shaped quick connection is used in De Jong Duke vending machines as part of the water or fluid circuit. It is usually replaced when the connection is cracked, leaking, blocked, worn or no longer holds correctly.
Product details
Brand: De Jong Duke
OEM part number: 4KPF023
Product type: Quick connection
Material: PPSU...
This Ranco thermostat is used to regulate temperature in compatible cold drink, frigo drink, granita and vending machines. It is usually replaced when the original thermostat is faulty, damaged, inaccurate, or no longer switches correctly.
Product details
Thermostat brand: Ranco
Product type: Thermostat
Model: K50 P1127
Contacts: 2...
This cable connection is used for the control board in compatible Sielaff vending machines. It is usually replaced when the cable connection is damaged, worn, faulty, or no longer provides a reliable electrical connection.
Product details
Brand: Sielaff
OEM part number: 7040052000
Product type: Cable connection for control board
Made...
Necta Evoca shower holder diffuser for the coffee group. This part has a diameter of 45 mm and is commonly replaced when the original diffuser or shower holder is worn, blocked, damaged, or no longer distributing water correctly.
Product details
Brand: Necta Vending / Evoca
Part type: Shower holder diffuser
Application: Coffee group...
This drip tray/waste bucket sensor is used in De Jong Duke vending machines to detect the status or position of the drip tray or waste bucket. It is usually replaced when the machine no longer detects the tray or bucket correctly, gives related error messages, or when the sensor or connector is damaged.
Product details
Brand: De Jong Duke...
This front bottom grid module is fitted to the lower front section of compatible Necta Vending Evoca vending machines. It is usually replaced when the original module is cracked, bent, damaged, loose, missing, or no longer fits correctly.
Product details
Brand: Necta Vending
Product type: Front bottom grid module
Dimensions: 575 x 98 mm...
This single flap mount with flap is used as a mounted flap assembly in Sielaff equipment. It is usually replaced when the flap, mount, or related assembly is damaged, worn, loose, or no longer opens and closes correctly. Product details Brand: Sielaff OEM part number: 6530136500 Product type: Flap mount with flap Version: Single Made in...
This boiler with inlet valves assembly is used in the hot water and brewing circuit of compatible Necta Vending Evoca vending machines. It is usually replaced when the original boiler assembly is leaking, scaled, blocked, damaged, or when the inlet valves no longer operate correctly.
Product details
Brand: Necta Vending
Product type: Boiler...
