This OEM canister 60 short with plastic worm is used to hold and dose instant product powder in compatible De Jong Duke vending machines. It is usually replaced when the original canister is cracked, worn, damaged, blocked, or no longer doses product correctly.
Product details
Brand: De Jong Duke
OEM part number: 9DCN121113
Product type: Canister
Version: 60 short
Worm type: Plastic worm
Made in Netherlands
Compatibility
De Jong Duke
Vending machine:
Avy series:
Avy-Coex-Medium (20220901-)
Avy-Coex-Small (20220901-)
Edge series:
Edge-Small-CoEx (9CNDQ)
Edge-Small-CoExXL (9XNAQ)
Edge-Small-Instant (9INBQ)
Edge-Small-Uni-Brewer (9FNDQ)
SiroTouch series:
SiroTouch-Medium-CoEx (9CECH)
SiroTouch-Medium-Instant (9IEAH)
SiroTouch-Medium-Uni-Brewer (9FECH)
SiroTouch-Small-CoEx (9CNDH)
SiroTouch-Small-Instant (9INBH)
SiroTouch-Small-Uni-Brewer (9FNDH)
Varea series:
Varea-Medium-CoEx (9CECK)
Varea-Medium-CoExXL (9XEAK)
Varea-Medium-Instant (9IEAK)
Varea-Medium-Uni-Brewer (9FECK)
Varea-Small-CoEx (9CND)
Varea-Small-CoExXL (9XNAK)
Varea-Small-Instant 2020 (9INBK)
Varea-Small-Instant 2021 (9INBK)
Varea-Small-Uni-Brewer (9FNDK)
Virtu series:
Virtu-Medium-CoEx (9CECK)
Virtu-Medium-Instant (9IEAK)
Virtu-Medium-Uni-Brewer (9FECK)
Virtu-Small-CoEx (9CNDK)
Virtu-Small-CoExXL (9XNAK)
Virtu-Small-Instant (9INBK)
Virtu-Small-Instant-High-Capacity (9INBK)
Virtu-Small-Uni-Brewer (9FNDK)
Zia series:
Zia-Medium-CoEx (9CECP)
Zia-Medium-CoExXL (9XEAP)
Zia-Medium-Instant (9IEAP)
Zia-Medium-Uni-Brewer (9FECP)
Zia-Small-CoEx (9CNDP)
Zia-Small-CoExXL (9XNAP)
Zia-Small-Instant (9INBP)
Zia-Small-Uni-Brewer (9FNDP)
Looking for similar items or different specifications for this De Jong Duke OEM 9DCN121113 canister 60 short?
Explore our full range in the Vending category
*
This is a OEM/original spare part. Part numbers are always leading.
Details
65-771-10530816
Review
Comments (0)
No customer reviews for the moment.
Your review appreciation cannot be sent
Report comment
Are you sure that you want to report this comment?
Report sent
Your report has been submitted and will be considered by a moderator.
Your report cannot be sent
Write your review
Review sent
Your comment has been submitted and will be available once approved by a moderator.
This brewing unit is used in compatible Sielaff vending machines to handle the coffee brewing process. It is usually replaced when the unit is worn, leaking, blocked, mechanically damaged or no longer completes the brewing cycle correctly.
Product details
Brand: Sielaff
OEM part number: 4070360000
Product type: Brewing unit
Made in...
This long drip tray sensor is used in De Jong Duke vending machines to detect the drip tray status in the machine system. It is usually replaced when the sensor is damaged, gives incorrect readings or causes drip tray related faults.
Product details
Brand: De Jong Duke
OEM part number: 6CSS047
Product type: Drip tray sensor
Version:...
This electromechanical latch lock with switch is used in the locking section of compatible Sielaff vending machines. It is usually replaced when the lock is damaged, does not actuate correctly, gives unreliable switch signals, or no longer secures the related section properly.
Product details
Brand: Sielaff
OEM part number: 4047066900...
This guide spiral is used in compatible vending machines to guide products during the dispensing cycle. It is usually replaced when the spiral is bent, worn, damaged or no longer supports correct product movement in the vending tray.
Product details
Product type: Guide spiral
Diameter: ø 68 mm
Pitch: P77
Direction: LH
Colour:...
This support arm kit is used in Sielaff vending machines as part of the product handling or delivery mechanism. It is usually replaced when the arm is worn, bent, damaged, incomplete or no longer supports correct movement during operation.
Product details
Brand: Sielaff
OEM part number: 7007636500
Product type: Support arm kit...
This multiport board is used in the electronic control section of compatible Necta Vending Evoca vending machines. It is usually replaced when the original board is faulty, damaged, unresponsive, or no longer provides reliable signal or connection management between machine components.
Product details
Brand: Necta Vending
Product type:...
This bottles product elevation is used in the bottle product storage or dispensing section of compatible Necta Vending Evoca vending machines. It is usually replaced when the original elevation part is worn, bent, cracked, damaged, missing, or no longer supports the bottles correctly.
Product details
Brand: Necta Vending
Product type:...
This OEM gear motor operates the door movement mechanism in compatible Necta Vending Evoca machines. It is usually replaced when the original motor is noisy, seized, damaged, or no longer opens or closes the connected door correctly.
Product details
Brand: Necta Vending
Product type: Gear motor
Application: Door movement
Part type:...
