This transformer is used in DR Coffee superautomatic coffee machines as part of the electrical power system. It is usually replaced when the machine has power supply faults, unstable electrical output, no response from connected components or when the transformer has failed electrically.
Product details
Brand: DR Coffee
OEM part number: 9D0300018
Product type: Transformer
Made in China
Compatibility
DR Coffee
Superautomatic coffee machine:
Coffeebar (20250304-)
Coffeebar-Plus-B (20220917-)
Coffee-Center (20220701-)
Coffee-Center (20240219-)
Coffee-Center (20250225-)
Coffee-Center-Plus (20250225-)
Coffee-Express (20250123-)
Coffee-Express (20250304-)
Coffee-Zone (20240618-)
Coffee-Zone (20250304-)
F100-Series (20250304-)
F2 (20221026-)
F2 (20250225-)
F200 (20250123-)
F200-M-Series (20250304-)
F2-H
F2-Plus
F3 (20241028-)
F3 (20250204-)
Minibar (20220415-)
Minibar (20250304-)
Minibar-Coffeebar-Plus
Minibar-S1
Minibar-S2
Looking for similar items or different specifications for this DR Coffee OEM 9D0300018 transformer?
Explore our full range in the Horeca category
*
This is a OEM/original spare part. Part numbers are always leading.
Details
65-073-1739013
Review
Comments (0)
No customer reviews for the moment.
Your review appreciation cannot be sent
Report comment
Are you sure that you want to report this comment?
Report sent
Your report has been submitted and will be considered by a moderator.
Your report cannot be sent
Write your review
Review sent
Your comment has been submitted and will be available once approved by a moderator.
This Tecnoeka OEM oven door gasket is designed for Snack Line E ovens and various Tecnoeka convection and pastry ovens.
With a total length of 1780 mm, it ensures a proper seal around the oven door, reducing heat loss and protecting
surrounding components. Ideal as a replacement seal when the original gasket is worn, hard or damaged. Made in Italy....
The Mareno OEM CR0599520 condensate drain [C] pan is a genuine drain tray for
Mareno boiling pans. It collects and channels condensate and drips from the pan and surrounding
area, helping to keep the cooking block cleaner and safer in intensive HoReCa use.
This original Mareno drain pan is designed to fit the dedicated support and drain...
The Mareno OEM CR0412260 ball valve is a genuine shut-off/drain valve used on selected
Mareno pasta cookers. This valve features ø 1" FF (female-female) connections,
making it suitable for the corresponding factory pipework and drain assemblies on professional pasta cooker units.
Built for commercial kitchen use, this original Mareno part is...
The Coprel W5/2A P.30 IV LC1 motor, made in Italy, delivers reliable performance for professional refrigeration equipment. Operating at 230V 50/60Hz with 35/5W power and 2500rpm, and featuring a 1300 mm cable, this motor is perfectly suited for refrigerated display cabinets. Engineered for durability and consistent operation, it ensures your equipment...
The Fimar OEM SL2520 knife holder pin 32/TN-RS is a genuine locating pin for the cutting
group of professional Fimar meat mincers. It helps to position and secure the knife holder
and related components on the mincer outlet, keeping the cutting set correctly aligned for safe and efficient
mincing in daily HoReCa use.
This original Fimar OEM...
Keep your dishwasher’s water connections leak-free with this precision-engineered ring nut, made in Italy from corrosion-resistant material. It features an internal diameter of 92 mm and an external diameter of 185 mm, providing a perfect fit for inlet and drain assemblies.
Key Benefits
Exact dimensions: Ø 92 mm internal, Ø 185 mm external
Durable...
This original Lainox OEM core temperature probe is designed for accurate internal temperature monitoring during cooking processes. It features a 6-pin connector, a 3.5 × 90 mm sensor, and a 1100 mm cable. Made in Italy.
Technical features
Original OEM part
Core temperature probe (TCK type)
6-pin connector
Sensor diameter: 3.5 mm
Sensor length:...
This durable 1100 mm hose is ideal for HoReCa environments, providing reliable water flow for rinsing systems and pre-rinse sprayers. Made by KLARCO in Italy, it features standard 1/2" FF connections, allowing for seamless compatibility in commercial kitchens.
Length: 1100 mm
Fittings: 1/2" FF (female-female)
Use: Compatible with rinsing systems,...