The Fimar OEM SA1064 potato peeler bottom chamber assembly ø 393 mm is a genuine
complete lower chamber group for Fimar vegetable washers and potato peelers. It forms the
rotating bottom of the peeling/washing tank, supporting the abrasive plate and ensuring stable, even movement
for effective potato processing in professional HoReCa kitchens.
This assembly is supplied complete with pin, bearings, sealings and pulley, so you can
replace the entire drive-supported bottom unit in a single operation. As an original
Fimar OEM spare part it matches the internal diameter
(ø 393 mm), shaft interface and fixing points of the factory-fitted chamber, allowing
direct installation without modification. This bottom chamber assembly is Made in Italy.
Application: Fimar LCF/LCN machines and PPF/PPN potato peelers
Function: Rotating bottom chamber for peeling/washing tank
Use: Professional HoReCa vegetable washing and potato peeling
Origin: Made in Italy
Compatibility
Fimar LCF / LCN series
LCF10M (Vers1)
LCF10M (Vers2)
LCF10M (Vers3)
LCF18M (Vers1)
LCF18M (Vers2)
LCF5 (Vers2)
LCF5 (Vers3)
LCF5 (Vers4)
LCN10M (Vers1)
LCN10M (Vers2)
LCN10M (Vers3)
LCN18M (Vers1)
LCN18M (Vers2)
LCN18M (Vers3)
LCN5 (Vers3)
LCN5 (Vers4)
LCN5 (Vers5)
Fimar potato peeler (PPF / PPN series)
PPF10M (Vers1)
PPF10M (Vers2)
PPF10M (Vers3)
PPF18M (Vers1)
PPF18M (Vers2)
PPF18M (Vers3)
PPF5 (Vers2)
PPF5 (Vers3)
PPF5 (Vers4)
PPN10M (Vers1)
PPN10M (Vers2)
PPN10M (Vers3)
PPN18M (Vers1)
PPN18M (Vers2)
PPN18M (Vers3)
PPN5 (Vers3)
PPN5 (Vers4)
PPN5 (Vers5)
Always verify the OEM reference SA1064 and compatibility with your machine’s documentation before ordering.
Looking for similar items or different specifications for this Fimar OEM SA1064 potato peeler bottom chamber assembly ø 393 mm?
Explore our full range in the Horeca category
*
This is a OEM/original spare part. Part numbers are always leading.
The Motor M48L LH with clamp connection from Elettromeccanica CDC is a precision electromechanical drive motor for timer drives and control systems. Engineered in Italy, it runs on 24 VAC, 50/60 Hz and features a 6.7 mm drive pin within a compact 48 × 20 mm housing. Its clamp-style terminal block ensures secure, tool-free wiring.
Key Features...
Maintain optimal compressor performance and safeguard against electrical faults with the Danfoss Secop Relay 117U-6019. This Slovak-made relay provides precise voltage switching for reliable compressor starts and long-lasting operation in refrigeration systems.
Precision Switching: Accurate start-run transition to extend compressor...
Brooks-Parts offers the Sharpening Stone 51x12x8 Fine, featuring a fine grain for precision.
With a 51 mm diameter, 12 mm height, and an 8 mm hole,
it is suitable for Berkel and RGV slicers.
Made in Italy, this stone delivers outstanding Italian craftsmanship to maintain your Horeca equipment’s performance....
p>The Hartell GPP-4MH-2P is a high-speed condensate pump engineered in the USA. Operating at 3000 RPM with a 230 V 50/60 Hz motor and featuring a Ø 16 mm hose-end fitting, it provides rapid, reliable drainage in commercial ice machines.
Compatible Ice-O-Matic Models
C-Series: C105/C105C, C106/C106C, C121, C125, C126C, C135C, C136/C136C,...
The Unger B98/32/6 self-sharpening plate is designed for use with B98/32 UNGER meat mincers.
Featuring ø 6 mm ejection holes, it is ideal for coarse grinding in professional butchery and HoReCa environments.
The self-sharpening design ensures that the knife and plate maintain sharpness over time, delivering consistent performance.
This Unger...
The Fimar OEM ME2530 mixing tool complete is a genuine replacement mixing tool for
Fimar handheld food mills. With an overall length of 310 mm, it is designed
for blending, pureeing and emulsifying directly in pots and containers, ideal for soups, sauces and other
preparations in professional HoReCa kitchens.
As an original Fimar OEM spare...
Bring reliable, smooth door operation to your furniture or equipment with the Fermod Chrome-Plated Hinge 401. Manufactured in France, this precision hinge measures 96 mm overall, with a versatile 64–32 mm adjustable centre distance to match varied mounting setups. Its high-gloss chrome finish resists corrosion and wear, while the hardened-steel core...
Ensure precise refrigerant metering and reliable compressor protection with the Danfoss Nozzle 00. Manufactured in Denmark, this calibrated orifice plate is available in two sizes—068-2070 and 068-2090—and installs securely using the Danfoss soldering adapter for a leak-proof seal.
Calibrated Orifice: Drilled to exact tolerances for...
