The conical grinding burr set on this product page is used on various Fiorenzato coffee grinders. This set off burrs is a OEM/Original Fiorenzato part. The Fiorenzato part reference number for this set is 400000002.
These grinding burrs are from the conical type and turn clockwise (right). The external diameters are 63 and 34mm the internal diameters are 40 and 13mm. The thickness of these burrs is 23mm. There are in total 3 fixing holes. This grinding burr has been made in Italy.
These grinding burrs can be used on the Fiorenzato F63 KA, Fiorenzato F63 KE, Fiorenzato F63EK and the Fiorenzato F63K.
How often do you clean your grinder internally as a barista? Probably not often, but it’s really easy with Puly Grind Crystals. These crystals are super concentrated, without any gluten and other allergenics. The Puly grind Crystals come in a box of 10 satchels, but you only need 1 per use. When using the Puly Grind Crystals on your coffee grinder...
On this page you will find our own Brooks microfiber cleaning cloths. These cloths are ideal for cleaning your espresso machine, coffee grinder or just the work surface around your espresso machine. This is not the standard household dust cleaning cloth your standard find. This type of microfiber is a lot softer used to clean finer surfaces like car...
On this page you will find our own Brooks microfiber cleaning cloths. These cloths are ideal for cleaning your espresso machine, coffee grinder or just the work surface around your espresso machine. This is not the standard household dust cleaning cloth your standard find. This type of microfiber is a lot softer used to clean finer surfaces like car...
The capacitor on this product page is made by the Italian company Ducati Energia. The Capacitor provides 25µF at 450V 50/60Hz. This specific model is a version with the cables attached to the capacitor. The length of this 1 pole cable is 150mm. The outer diameter is 40mm and the length is 92mm. The capacitor can operate at -25 degree C all the way up to...
The item on this page is a flat gasket used on various Rancilio coffee machines. This item is mainly used on the water inlet valves on the older Rancilio coffee machines. The Rancilio part reference number for this item is 36302001.
This flat gasket has been made from EPDM. The outer diameter is 11mm, the inner diameter is 3,6mm and the...
This fitting is used to transition from a conical male 1/8” BSP-G fitting, to a flat 1/8” BSP-G thread. why would you do this? well capillaries have in most cases flat connections, but there are also brands which have conical capillaries. This can be found for instance on Faema and Cimbali coffee machines.
This fitting is called a extended version, seen...
The boiler gasket on this page is used for a variety of Gaggia espresso machines. From the antique ones all the way to the modern ones. The Gaggia part references for this item are 4027014000 and CA0321/01.
This boiler gasket has been made from AFM34 from Victor Reinz. This gasket has a outer diameter of 220mm a inner diameter of 168mm and a...
It is quite common on the La Cimbali M39 that the coffee selection stickers break or come loose. To get your espresso machine back to original state you can replace this sticker with a new one. It is a doming sticker, so it is slightly rounded.
The La Cimbali part references for this part art 913-192-000, 913-192-010, 913192020 and 913-192-020....
the portafilter shown on this product page is a OEM/Original Wega spare part. The part reference for the body of this portafilter is WY27311010, so not the entire portafilter.
This portafilter is a 2 coffee model. The spout used has a 3/8” BSP-g thread and is open. The ears have a 90 degree orientation. The thickness of them is 6,5mm. the...
