0
My cart
Flex pipe 385mm 3/8 ff with 1 conical elbow
€12.38
€12.38 tax excl.
GDPR Compliance
Protecting your personal data
Shipping policy
Everything about shipping your order
Return policy
all the inns and outs about our return policy
On this page you will find a stainless steel flex hose suitable for various application with kitchen, coffee and espresso machines. This specific model of flex hose is also suitable for the US market, seen this hose has a NSF certification.
This specific flex hose has a overall length of 385mm. On each side there is a female 3/8”BSP-G fitting. The fitting is conical so there is no need for a gasket. One of the fittings has a 90 degree corner.
The maximum fluid temperature for this hose is 90 degree Celsius. The maximum working pressure is 10 bar.
23-030-L-1449233
Data sheet
- Certification
- NSF
- Country of manufacturing
- Made in Italy
- Fitting thread 1
- 3/8" F
- Fitting thread 2
- 3/8" F
- Fitting type
- Conical
- Length
- 385mm
- Max Pressure
- 10 bar
- max temperature
- 90°C
Comments (0)
No customer reviews for the moment.
8 other product
Vibiemme heating element 1800W 230V
On this product page you will find a heating element suitable for various Vibiemme single group espresso machines. The Vibiemme part reference for this element is ELETRESSM1822
This heating element produces 1800W at 230V, there are 2 connecting poles. The immersed length of this element is 140mm. The flange used is a screw in flange which has a...
€58.95
Thermostat 135° with manual reset
The item on this product page is a contact thermostat and can be used on various espresso machine brands such as La Marzocco, Nuova Simonelli and Victoria Arduino.
This contact thermostat switches off at 135°C. it needs to be reset manually. This thermostat is rated up to 16A at 250V. the item has been made in Italy.
You can use this contact...
€6.89
O ring gasket FKM 10.78x2.62mm
On this page you will find a o ring with the dimensions 10,78x2.62mm. It is made from FKM (viton is a registered trade brand, but the material is identical) This o ring is used in a variety of locations in espresso machines. It is used with steam and water wands in espresso machines with brands like: Marzocco, Casadio, Vibiemme, Grimac, Cimbali and Faema....
€0.74
Filterholder suplement gasket 73x59x0.8mm
The paper shim on this page is one of the most widely used paper shim. You can use this type with a wide selection of espresso machine brewing groups.
What are the dimensions of this paper shim? They have a outer diameter of 73mm, a inner diameter of 59mm and a thickness of 0,8mm.
What does a paper shim do? Brewing group locking mechanisms wear due to...
€0.43
Rocket ode 2 way solenoid valve 1/8" 110/120V
On this page you will find a 2 way solenoid a ODE solenoid valve. This valve is made by ODE in Italy, the part number of this item is: 21JN1R0V23-TS
This 2 way solenoid valve has a in and outlet, they are both 1/8” BSP. The orifice in the solenoid valve has a diameter of 2,3mm and is in it’s closed position sealed of with a FKM seal. The body...
€91.54
Double nipple female 3/8"
On this product page you will find a connector fitting, to extend or make a male thread female. This specific model has a thread of 3/8” BSP-G on each side. This product has been manufactured in Italy.
The model shown is one which has been made from nickel plated brass. It is also possible that you get one which is solely made from brass without...
€3.00
Washer 13,9x8,3x1mm brass
The item on this product page is a brass washer used on various Faema espresso machine models. The Faema part reference numbers for this item are 4051047112, 4051047130 and 4051050569.
This washer is made from brass. The outer diameter is 13,9mm, the inner diameter is 8,3mm and the thickness is 1mm. This washer is made from brass.
This brass...
€1.25