Gaggia/Pavoni closure drain

On this product page you will find a contact thermostat which is used on a variety of espresso machine brands. You will find this contact thermostat on Brasilia, Gaggia and Isomac espresso machines. The part references are for Brasilia 09415.2.00.08, Gaggia WGADM1561 and for Isomac IS000281.  This contact thermostat is set at 100°C and is a...

The product on this page is a Allen head screw for attaching a solenoid valve to a other surface. This type is a M4x10mm. It is a stainless-steel bolt according to UNI 5931 - DIN 912 - ISO 4762 You will only need this type of Allen head screw to attach the flanged solenoid valves to a flat surface. This type of Allen screw is used in a lot of espresso...

The shower screen shown on this page is one used on various commercial espresso machines made by Gaggia. This model shower screen has been made by IMS filtri. The part reference for this item is IMSDR323. Note: this is not a competition shower screen. This stainless steel shower screen has a outer diameter of 55mm. The central hole is suitable for a M5...

The portafilter gasket shown on this product page is one of the most common sizes found on commercial espresso machines. But this gasket hasn’t been made from NBR as traditionally done, but from food grade silicone. You can find this portafilter gasket on brands such as Faema, Vibiemme, Bezzera and La Scala. This red silicone gasket has a outer diameter...

The portafilter gasket on this page can be used on various commercial Gaggia espresso machine brewing groups. The Gaggia part reference for this item is WGANG01/001/B. This portafilter gasket has been made from NBR. The outer diameter is 72mm the inner diameter is 56mm and the thickness is 8,5mm. This gasket can be used on various brewing groups used...

The product on this page is a solenoid valve connector, large F fitting. With this connector you can seal off and connect your wiring and solenoid valve to each other. These connectors can be used on all types of standard solenoid valve coils. Where the positive and negative are spaced apart approx. 17mm. This solenoid valve connector can be basically...

In some cases, the shower screen is attached with a screw, in most cases that is a Philips or a slotted screw. It is difficult to remove it with a regular screwdriver due to the limited height under the brew group.  But for that you need a shortened slotted screwdriver, in this case the one from the German brand Wera, which fits well under the brewing...

This o ring is one of the most common parts in the world of espresso machines. The main function of this o ring is to seal off a flanged solenoid valve. Every flanged solenoid valve uses 2 of these. But you will also find them in applications like steam and water valves and water inlet taps. The o ring has a wire diameter of 1,78mm and a internal...