This gear motor is used to drive an internal mechanism in compatible Necta Vending Evoca vending machines. It is usually replaced when the original motor is noisy, worn, seized, damaged, or no longer rotates the connected mechanism correctly.
Product details
Product type: Gear motor
Voltage: 220/240 V
Frequency: 50/60 Hz
Power: 43 W
Speed: 8 rpm
Made in Italy
Compatibility
Necta Vending Evoca
Vending machine:
Astro series:
Astro-ESP-INST
Astro-P-Espresso-Instant
Brio series:
Brio-250 C-I
Brio-3-ESP
Brio-Up (201405-)
Colibri series:
Colibri (201109-)
Granmattino series:
Granmattino-ES-INST
Granmattino-LX-ES-INST
Kikko series:
Kikko-Espresso-Instant
Kikko-RY-Espresso-Instant
Korinto series:
Korinto-ES-IN (201701-)
Korinto-Espresso-Instant (201507-)
Korinto-Fresh-Milk (201507-)
Korinto-Prime-Espresso (201701-)
Korinto-Prime-Fresh-Milk (201701-)
Koro series:
Koro (201603-)
Koro-Espresso-Instant (201601-)
Koro-Prime-Espresso (201706-)
Koro-Prime-Espresso-Fresh-Milk (201706-)
Oblo series:
Oblo-Espresso-Instant
Spazio series:
Spazio-Espresso-Instant
Spazio-P-ES-INST
Spazio-Porta-Tonda-ES-IN
Venezia series:
Venezia-Blue-Edition-ES-IN
Venezia-Silver-Edition-ES-INST
Zenith series:
Zenith-C-I
Looking for similar items or different specifications for this Gear motor 220/240 V 43 W 8 rpm?
Explore our full range in the Vending, Necta Vending, Necta Brio categories
*
This part is compatible to the original part number. Part numbers are always leading.
Details
65-756-5118576
Data sheet
Type
Compatible (non-original)
Review
Comments (0)
No customer reviews for the moment.
Your review appreciation cannot be sent
Report comment
Are you sure that you want to report this comment?
Report sent
Your report has been submitted and will be considered by a moderator.
Your report cannot be sent
Write your review
Review sent
Your comment has been submitted and will be available once approved by a moderator.
This mounted infusion chamber is used in the coffee brewing section of compatible Necta Vending machines. It is usually replaced when the original chamber is worn, cracked, damaged, leaking, blocked, or no longer supports the brewing process correctly.
Product details
Brand: Necta Vending
Product type: Mounted infusion chamber
Made in...
This complete brewing chamber is used in compatible Sielaff espresso vending machines as part of the coffee brewing section. It is usually replaced when the chamber is worn, damaged, leaking, blocked, or no longer completes the brewing cycle correctly.
Product details
Brand: Sielaff
Product type: Complete brewing chamber
Made in Germany...
This OEM pump is used in the water supply circuit of compatible Necta Vending Evoca vending machines. It is usually replaced when the original pump is noisy, leaking, blocked, weak, damaged, or no longer delivers the correct water flow or pressure.
Product details
Brand: Necta Vending Evoca
Product type: Pump
Compatibility
Necta...
This reinforced rear bushing is used with the soluble hopper scroll in compatible Saeco vending machines. It supports the scroll at the rear side and helps keep it correctly positioned during powder dosing. The bushing is usually replaced when it is worn, cracked, loose or no longer supports smooth scroll movement.
Product details
Product type:...
This coin display assembly is used in the payment display section of compatible Necta Vending Evoca vending machines. It is usually replaced when the original display assembly is damaged, faulty, unresponsive, unreadable, or no longer shows payment information correctly.
Product details
Brand: Necta Vending
Product type: Coin display...
This pre-mounted motor carrier is used to hold or support the motor assembly in compatible Sielaff vending machines. It is usually replaced when the carrier is damaged, bent, worn, or no longer holds the motor correctly.
Product details
Brand: Sielaff
OEM part number: 7040126600
Product type: Pre-mounted motor carrier
Made in...
This drip tray lid is used in De Jong Duke vending machines as part of the drip tray assembly. It is usually replaced when the original lid is cracked, worn, damaged, missing or no longer fits correctly on the drip tray.
Product details
Brand: De Jong Duke
OEM part number: 6BMB035
Product type: Drip tray lid
Application: Vending...
This anthracite delivery chamber is used in the dispensing area of compatible vending machines. It is usually replaced when the original delivery chamber is worn, cracked, damaged, missing, or no longer fits correctly in the machine.
Product details
Brand: Necta Vending
Product type: Delivery chamber
Colour: Anthracite...