Gicar low pressure flowmeter

On this product page you will find a flowmeter, produced by the Italian company Gicar, mainly used on espresso machines of the La Cimbali Group. This flowmeter has the Casadio part reference 1455058, the Cimbali reference 534-393-100 and the Faema Reference 534393100. This flowmeter has a inlet and outlet, both have a female ¼” BSP-G thread. The nozzle...

On this product page you will find a flowmeter manufactured by the company Digmesa. This product has the Digmesa part references 93B-0612/08 and 93B-0612/F08 This flowmeter has a female in and outlet fitting, this fitting has a ¼” BSP-G thread. The orifice/nozzle inside the flowmeter has a diameter of 1,2mm. This flowmeter can be used on the Victoria...

On this product page you will find a flowmeter suitable for various brands of the La Cimbali Group. This flowmeter has been manufactured by the Italian company Gicar. The part references of Gicar for this item are 9.0.26.11G and 9.0.56.11G This flowmeter is made out of 2 pieces. The brass, low lead, casting and the measuring device which is made from a...

This flowmeter has the part reference numbers 9.0.97.62G and 9.0.97.85G. It has on each side a ¼” BSP-G thread. The orifice in this valve has a diameter of 1,15mm. This flowmeter has been made in Italy and is nsf certified

On this page you will find a flowmeter made by the Italian company Gicar. This specific model of flowmeter can be used with a variety of brands such as San Remo, La Cimbali, Nuova Simonelli and Brasilia. The Gicar part numbers for this item are (9.0.25.50G, 9.0.96.50G and 9.0.55.50G) The fittings which can be used on the in and outlet of flowmeter are...

A flowmeter is one of the most important things when you have a volumetric espresso machine, otherwise this is not possible. This specific model of flowmeter is used on various Rancilio espresso machines. This specific model of flowmeter is made by the Italian company Gicar, This flowmeter has the Gicar part reference numbers 9.0.55.20G and 9.0.25.20G....

It is possible that the flowmeter in your espresso machine starts to leak. On this page you will find a replacement part for most flowmeters. This is the sealing o ring which goes between the flowmeter body and the measuring device. This o ring is suitable for Digmesa and Gicar flowmeters. The cord diameter of this o ring is 1,78mm and the inner diameter...

This specific Gicar flowmeter can be used on various versions of the Domobar Super espresso machine. This flowmeter is compatible with the VBM part number ELETCONTVODOS.