This L fitting is used in the water or fluid circuit of compatible vending machines. It is usually replaced when the original fitting is cracked, blocked, leaking, damaged, or no longer seals correctly.
Product details
Product type: L fitting
Connection: ø 1/8" M x 5 mm
Made in Italy
Compatibility
Lavazza
Vending machine:
Brio3
LB 3300 Brio3 Ric IT
LB3000-Astro
Necta Vending Evoca
Vending machine:
Brio series:
Brio3
Brio-3-ESP
Brio-Up (201405-)
Colibri series:
Colibri
Colibri (201109-)
Kikko series:
Kikko
Kikko-Espresso-Instant
Kikko-Max (201104-)
Kikko-RY-Espresso-Instant
Korinto series:
Korinto-ES-IN (201701-)
Korinto-Espresso-Instant (201507-)
Korinto-Fresh-Milk (201507-)
Korinto-Prime-Espresso (201701-)
Korinto-Prime-Fresh-Milk (201701-)
Koro series:
Koro (201603-)
Koro-Espresso-Instant (201601-)
Koro-Prime-Espresso (201706-)
Koro-Prime-Espresso-Fresh-Milk (201706-)
Wittenborg Evoca
Vending machine:
7100-Plus-Espresso (201704-)
7300-Espresso (201403-)
Looking for similar items or different specifications for this L fitting 1/8"M x 5 mm for vending machines?
Explore our full range in the Vending, Necta Vending, Necta Brio categories
*
This part is compatible to the original part number. Part numbers are always leading.
Details
65-519-1349199
Data sheet
Type
Compatible (non-original)
Review
Comments (0)
No customer reviews for the moment.
Your review appreciation cannot be sent
Report comment
Are you sure that you want to report this comment?
Report sent
Your report has been submitted and will be considered by a moderator.
Your report cannot be sent
Write your review
Review sent
Your comment has been submitted and will be available once approved by a moderator.
This pressure gauge manometer is used in De Jong Duke vending machines to display the pressure in the machine system. It is usually replaced when the gauge is damaged, leaking, unreadable or no longer gives a reliable pressure reading.
Product details
Brand: De Jong Duke
OEM part number: 9VDG001
Product type: Pressure gauge manometer...
This uni brewer cylinder is used in De Jong Duke vending machines as part of the brewing unit. It is usually replaced when the cylinder is worn, damaged, leaking or no longer allows the brewer to operate correctly.
Product details
Brand: De Jong Duke
OEM part number: 5KBR028
Product type: Uni brewer cylinder
Diameter: 83 mm...
This 3-way 24 V solenoid assembly with wand is used in the water or dispensing circuit of compatible Necta Vending Evoca vending machines. It is usually replaced when the original solenoid assembly is leaking, blocked, faulty, damaged, or no longer controls the water flow correctly.
Product details
Brand: Necta Vending
Product type: 3-way...
This coffee container assembly 2ES is used to hold coffee beans in compatible Necta Vending Evoca vending machines. It is usually replaced when the original container assembly is cracked, worn, damaged, missing, or no longer fits securely in the machine.
Product details
Brand: Necta Vending
Product type: Coffee container assembly...
This guide spiral is used in compatible vending machines to guide products during the dispensing cycle. It is usually replaced when the spiral is bent, worn, damaged or no longer supports correct product movement in the vending tray.
Product details
Product type: Guide spiral
Diameter: ø 66 mm
Pitch: P42
Direction: LH
Overall...
This OEM bracket is used to mount or support the CoEx assembly in compatible De Jong Duke vending machines. It is usually replaced when the original bracket is bent, worn, cracked, damaged, loose, or no longer holds the CoEx section correctly.
Product details
Brand: De Jong Duke
OEM part number: 5KBR055
Product type: Bracket...
This CPU/actuations board for R290 version is used in the electronic control section of compatible Necta Vending Evoca vending machines. It is usually replaced when the original board is faulty, damaged, unresponsive, or no longer controls the connected machine functions correctly.
Product details
Brand: Necta Vending
Product type:...
This 5 count RH spiral/ret is used in compatible Crane MS vending machines as part of the product dispensing system. It helps move and release products from the vending tray and is usually replaced when it is bent, worn, damaged or no longer dispenses products correctly.
Product details
Product type: Spiral/ret
Count: 5
Direction: RH...