La Cimbali M31 Dosatron

This 3 way solenoid valve is one of the most commonly found solenoid valves. The part is produced by Parker in Italy. This valve is mainly used as a brewing group solenoid valve. The remaining water from the group comes out of the outlet at the top. The Parker part numbers for this item are 393107J and 393112J This solenoid valve is a 3 way valve. The...

The PTFE gasket on this page is mainly used for machines made by the Cimbali group. You will find this PTFE gasket in hydraulic circuits, brewing groups, steam and water valves and water inlet valves. The Casadio part number for this gasket is 401183010, the Cimbali Part number is 401183010 / 401-183-010 and for Faema the part number is...

The hex screw on this page is used on various La Cimbali espresso machine brewing groups. The part reference number for this item are 593815000 and 593815010  This head bolt keeps the portafilter coupling ring in place. The thread used on this nut is a male M6. The length of this screw is 29mm, the item has been made in Italy. Note: there are various...

The rotary vane pump on this page is slightly different then a normal rotary vane pump. This specific model is made by Procon in Ireland. (CO1309BF and 131A060F123B) with a NSF certification The model pump is a clamp on rotary vane pump. The flanges of the pump and motor are pushed against each other and a stainless steel clamp is placed over it and...

The solenoid valve on this page is a 3 way solenoid valve, mainly with the application as a brewing group solenoid valve.  Parker has listed this part under 471012 and 471013 The coil used on this solenoid valve is a 9W 220/240V which runs on 50/60Hz. The coil number for this solenoid valve is 483510S6 The valve in question is a 3 way solenoid...

The product on this page is a Allen head screw for attaching a solenoid valve to a other surface. This type is a M4x10mm. It is a stainless-steel bolt according to UNI 5931 - DIN 912 - ISO 4762 You will only need this type of Allen head screw to attach the flanged solenoid valves to a flat surface. This type of Allen screw is used in a lot of espresso...

On this page you will find a assembled steam and water valve shaft for various La Cimbali, Faema and Casadio steam and water valves. The part number for this item is with Casadio 485910010, for Faema 485751010 and La Cimbali 985-710-010. For the complete part reference number list check the extra info tab. This brass valve shaft comes completely...

The anti-vacuum valve on this page can be used on various espresso machine models of the brand San Remo. The anti vacuum valve has the San Remo part reference of 10652040A  This anti vacuum valve has been made from stainless steel. The thread used is a male ¼” BSP-G thread. This stainless steel anti vacuum valve has been made in Italy...

The nozzle/gigleur is used on a couple of Cimbali brewing groups. This nozzle is not located inside the brewing group, as you see with most gigleurs. But it is installed inside the tubing at the flowmeter or close to the brewing group. This item has multiple part numbers you will find those at the extra info tab. This gigleur has a outer diameter of 14mm...

This heat exchanger support ring is used on La Cimbali brewing groups with the heat exchanger. This ring slides over the heat exchange itself and supports the copper heat exchanger. This ring is suitable in combination with the 210mm heat exchanger and the 150mm heat exchanger. The Cimbali part number used for this item is 457-165-028 This heat exchanger...

This heating element style you will mainly find with La Cimbali espresso machines. This specific heating element is mainly used with 2 and 3 group espresso coffee machines. The reference part number for Cimbali for this part is 537-012-200 This heating element has a overall length of 390mm. The heating element produces 4500/5370W at 220/240V. The element...

The single coffee stainless steel filterbasket on this page can be used with a variety of La Cimbali espresso machines. This item has been made in Italy by IMS filtri with the part reference GC1T044 The 1 cup coffee filter basket has a outer edge diameter of 68mm and a height of 22,5mm. The hole pattern is located in a diameter of 30mm.  The filter...