La San Marco OEM CPCRAC0020 L-Fitting ø 1/8"M NPT – ø 6 mm

On this page you will find a boiler safety valve 3/8” male with a present of 1,8 bar. This safety valve is, at own responsibility, adjustable. This can be done by tightening or untightening the Allan key slot in the top of the valve. Inside this safety valve has a stainless steel spring inside, the sealing material is FKM. This is a non certified...

The stainless-steel shower screen screw is mainly used on the La San Marco espresso machines. But it can also be used on a few models of the brands Astoria and Wega. The Astoria part reference is 27100001 and for Wega the reference is WY27100001. For the La San Marco part references please check our extra info tab. This shower screen has been made by the...

The bipolar switch on this page can be used for various brands such as Astoria and Cimbali espresso machines. The Cimbali part reference for this item is 532-004-400 and for Astoria the part reference is 18135. This switch has a red switching mechanism, with an indicator light in it. The switch has been rated up to 16A at 250V. The maximum temp is 120...

In some cases, the shower screen is attached with a screw, in most cases that is a Philips or a slotted screw. It is difficult to remove it with a regular screwdriver due to the limited height under the brew group.  But for that you need a shortened slotted screwdriver, in this case the one from the German brand Wera, which fits well under the brewing...

The item on this page is a sight glass which can be used on La San Marco espresso machine models. The La San Marco part references for this item are 206910 and CCMMIN3580. This sight glass can be used for the La San Marco 105 espresso machine. This sight glass has a outer diameter of 15mm and a overall length of 115mm. there is no silk screen printing on...

This PTFE gasket has a bit more unusual shape. It is a tube shape. This PTFE gasket is used on a variety of La San Marco espresso machine models. The La San Marco part reference of this item is 109125 and CTSGUA0410. This PTFE seal has a outer diameter of 16mm and a height of 20mm. This seals off the space between the steam tube and the steam and...

This OEM heating element is specifically designed for La San Marco three-group espresso machines, ensuring powerful and consistent heating performance. OEM part number: CCERES0520 Power: 7000W Voltage: 230/400V Immersed depth: 580 mm Poles: 6 Mounting hole spacing: 63 mm Flange size: 83x83 mm With bulb holder Made in Italy Compatible...

The item on this product page is part used on the steam and water valves used on La San Marco espresso machines. On one side this brass part holds a ptfe sealing gasket, on the other side it accommodates a compression spring. The La San Marco part reference numbers for this item are 205009 and CCMMIN1350. This gasket holder/spring guide can be used...