The Mareno OEM MACM097701 safety thermostat 230°C (5532542370) is a genuine high-limit safety
thermostat used on a wide range of Mareno fryer appliances (electric and gas). Its function is to
protect the fryer from overheating by cutting off the heating circuit when the safety limit is reached, helping
prevent damage and improving operational safety in professional kitchens.
This original Mareno safety thermostat is rated at 230°C and is supplied as the
factory-specified component wherever reference MACM097701 or 5532542370 is listed.
The part is Made in Germany and designed for intensive daily use in HoReCa environments.
Always compare the OEM references MACM097701 / 5532542370 and the 230°C safety
limit with your original part and the technical documentation of your appliance before ordering.
Part type: Safety thermostat / high-limit thermostat
Cut-out temperature: 230°C
Application: Overheat protection on Mareno fryers (electric and gas)
Function: Safety cut-off when temperature limit is exceeded
Use: Professional HoReCa fryer equipment
Origin: Made in Germany
Looking for similar items or different specifications for this Mareno OEM MACM097701 safety thermostat 230°C 5532542370?
Explore our full range in the Horeca category
*
This is a OEM/original spare part. Part numbers are always leading.
This Gicar push-button panel is used to control machine functions from the front panel. It is replaced when the buttons no longer respond correctly, the panel is damaged, or the machine controls become unreliable.
Product details
Brand: Gicar
Part number: 9.9.07.41G
Product type: Push-button panel
Number of buttons: 6
Made in...
The EVCO CT1SA0020402 is a high-performance refrigeration controller made in Italy, ideal for neutral-counter cabinets and cook-chill systems. Its compact 162 × 76 mm housing mounts easily using the supplied drilling template.
Key Specifications
Power Supply: 12 Vac/dc, 50/60 Hz
Relay Outputs (7):
30 A compressor
8 A defrost
5...
Ensure precise water and steam control in your commercial kitchen with this high-quality Elframo pressure switch. Calibrated at 60/20 mbar and rated for 250 V 16 A, it operates reliably up to 85 °C.
Key Specifications
Calibration: 60/20 mbar
Electrical Rating: 250 V, 16 A
Temperature: ≤ 85 °C
Switch Type: Single-level
Origin: Made in Italy
Compatible...
This SPM OEM timer board controls timed machine functions in the granita machine. It is replaced when the machine no longer follows the correct timing, shows unstable control behaviour or the original board has an electrical fault.
Product details
Brand: SPM OEM
OEM part number: 04.IP0017.001
Product type: Timer board
Suitable for...
The Pressure Switch Digital ST-560-AC-002 is a high-quality pressure control device for commercial dishwashers, designed to maintain consistent pressure and optimize machine efficiency. It features a range of 0-50 mbar for precise pressure regulation and is equipped with a hose end fitting of ø 5.5 mm for easy installation.
This model is compatible with...
The Anfim OEM 75-A Grinding Burrs Pair is a premium replacement part made in Italy. With an external diameter of 75 mm, internal diameter of 43 mm, and 9 mm thickness, these left-hand (LH) burrs are designed to deliver precise and consistent grinding performance. Equipped with 3 fixing holes for secure installation, they are ideal for professional coffee...
The Krupps OEM 104451 ring nut is used on the
exhaust suction unit and is designed for the
double internal/external filter 155 configuration.
It helps secure the filter components for a stable and reliable fit.
Brand / OEM: Krupps OEM 104451
Product: ring nut for exhaust suction unit
Application: for double internal/external filter 155...
Ensure precise low-pressure control in your granita machines with the D16P pressure switch. Made in China and compatible with leading OEMs, it delivers reliable performance for continuous operation.
Key Features
Model: D16P07A01MS200 (also known as D16P)
OEM References:
Eliwell 016-528-081
Ranco 016H6703101
Ex 016-H6703...
