The Mareno OEM MACM293900 energy regulator is a genuine power/heat control regulator
used on various Mareno professional appliances. It is typically fitted behind a control knob on the front panel and
allows stepped regulation of heating power on electric loads (for example hot cupboards, glass-ceramic hobs or other
warming/heating equipment), helping the operator set output smoothly and safely.
This original Mareno energy regulator is supplied as the factory-specified part wherever reference
MACM293900 is listed for the compatible units below. The component is built for intensive HoReCa use
and is Made in Italy.
Always compare the OEM reference MACM293900 and the electrical specifications/terminals of your
existing regulator (as shown on the part label) with the parts diagram and the component fitted in your appliance
before ordering.
Compatibility
Mareno – Chaffing dish
SPCG08
Mareno – Hot cupboard
ERA10, ERA12, ERA14, ERA16, ERA18, ERA20
ERA210, ERA212, ERA214, ERA216, ERA218, ERA220
SPAC12, SPAC16, SPAC20
SPCG12, SPCG16, SPCG20
Mareno – Kitchen glass-ceramics
NV74EC, NV74EC-NP
NV78EC, NV78EC-NP
NV7FE8E, NV7FE8E2, NV7FE8E2-NP, NV7FE8E-NP
NV7FEV8E, NV7FEV8E2
PCVE40D, PCVE40DB, PCVE40DB-NP, PCVE40D-NP
PCVE60D, PCVE60DB, PCVE60DB-NP, PCVE60D-NP
Mareno – Pasta cooker
CPE60DB, CPE60DB-NP
Mareno – Salamander
SME62M, SME62M-NP
SME63M, SME63M-NP
SME70M, SME70M-NP
Mareno – Self service counter
SDPC08, SDPC08S, SDPC12, SDPC12S, SDPC15, SDPC15S
SPAC712, SPAC715
SPCG708, SPCG712, SPCG715
Technical features
Brand / OEM: Mareno OEM MACM293900
Part type: Energy regulator / power regulator
Application: Front-panel power/heat control (model dependent)
Function: Stepped regulation of electrical heating output
Use: Professional HoReCa equipment
Origin: Made in Italy
Looking for similar items or different specifications for this Mareno OEM MACM293900 energy regulator?
Explore our full range in the Horeca category
*
This is a OEM/original spare part. Part numbers are always leading.
We are Brooks‑Parts and sell spare parts for Horeca machines. This silicone heating element delivers 250W at 230V
with dimensions of 440 mm by 285 mm. It comes complete with an auto-reset thermostat and cables, designed for
Forcar display cabinet warm applications (VBR 4751 Forcar). Made in Romania.
Original Berkel OEM electronic control board designed for 3-phase slicers and food processing machines. This high-quality circuit board ensures reliable power management and stable performance in demanding commercial environments.
Technical specifications
Model: S3228
Type: PC board (3-phase)
Dimensions: 125 × 90 mm
Origin: Made in Italy
Use...
The Timer Motor CDC M48R Right-Hand from Elettromeccanica CDC is a compact electromechanical drive motor engineered for precision timer applications. Made in Italy, it operates at 230 V, 50 Hz and features a 4.5 mm drive pin within a 48 × 20 mm housing, providing reliable torque and quiet operation.
Key Features
Models: M48RE500000000000; M48R000000A30...
Maintain accurate pressure balance and prevent system stress in refrigeration and freezer applications with the Intertecnica ELEBAR G ZERO BT compensation valve, part number R021216. Manufactured in Italy to exacting standards, this valve ensures smooth performance under varying temperature and load conditions.
Key Features
Part Number: R021216...
The Mareno OEM MACM127800 water tap is a genuine Mareno tap used on professional equipment where a
reliable manual water on/off control is required. Depending on the appliance configuration, it can be used as a
service tap for filling, rinsing or controlled water supply in commercial HoReCa environments.
This original Mareno water tap is...
This heating element delivers 2000W at 230V and is made in Italy. With a length of 230 mm and width of 255 mm, it features a 70×22 mm flange. This model is compatible with various Tecnoinox salamanders and display cabinets, and with Zanussi machines under Electrolux group part number 0C7090.
Power: 2000W
Voltage: 230V
Length: 230 mm
Width: 255...
This SPM OEM spring support is used in the density adjustment mechanism of the machine. It is replaced when the original support is worn, damaged or no longer keeps the adjustment system working correctly.
Product details
Brand: SPM OEM
OEM part number: 02.BA0040.01
Product type: Spring support for density adjustment
Made in Italy...
The De Jong Duke OEM 5KPD039 nozzle cap is designed for optimal beverage dispensing in vending machines. Its robust construction ensures precise, clean, and efficient operation—ideal for commercial environments and regular servicing.
OEM part number: 5KPD039
Nozzle cap for beverage dispensing systems
Durable and hygienic design
Simple...
