This group of 5 ODE solenoid valves is used in the water or dispensing circuit of compatible Necta Vending Evoca machines. It is usually replaced when one or more valves are leaking, blocked, faulty, damaged, or no longer control the water flow correctly.
Product details
Brand: Necta Vending
Product type: Group of 5 solenoid valves
Valve type: ODE
Voltage: 220/230 V
Power: 8 W
Maximum temperature: 98 °C
Inlet diameter: ø 12 mm
Outlet diameter: ø 12 mm
Gasket material: Silicone
Orifice diameter: ø 9 mm
Compatibility
Necta Vending Evoca
Vending machine:
Brio series:
Brio-3-ESP
Looking for similar items or different specifications for this Necta Vending ODE 5 solenoid valve group 220 V 8 W?
Explore our full range in the Vending category
*
This part is compatible to the original part number. Part numbers are always leading.
Details
65-711-1120212
Data sheet
Type
Compatible (non-original)
Review
Comments (0)
No customer reviews for the moment.
Your review appreciation cannot be sent
Report comment
Are you sure that you want to report this comment?
Report sent
Your report has been submitted and will be considered by a moderator.
Your report cannot be sent
Write your review
Review sent
Your comment has been submitted and will be available once approved by a moderator.
This guide spiral is used in compatible vending machines to guide products during the dispensing cycle. The rod helps support the spiral during operation. It is usually replaced when the spiral is bent, worn, damaged or no longer supports correct product movement in the vending tray.
Product details
Product type: Guide spiral
Diameter: ø 68...
This outlet knee is used in De Jong Duke vending machines as part of the outlet or water system. It is usually replaced when the original outlet knee is cracked, worn, blocked, leaking or no longer fits correctly.
Product details
Brand: De Jong Duke
OEM part number: 5KVL022
Product type: Outlet knee
Angle: 107°
Size: D10...
This pre-assembled delivery unit is used in Sielaff vending machines as part of the product delivery or dispensing system. It is usually replaced when the unit is worn, damaged, incomplete or no longer transfers products correctly during operation.
Product details
Brand: Sielaff
OEM part number: 7040231000
Product type: Pre-assembled...
This pre-mounted XL M32 control unit is used for machine control in Sielaff equipment. It is usually replaced when the existing control unit is defective, damaged, or causes control, communication, or electrical faults.
Product details
Brand: Sielaff
OEM part number: 7040151098
Product type: Pre-mounted control unit
Version: XL M32...
This mixer air extraction component is used in the mixing section of compatible Sielaff vending machines. It is usually replaced when the part is cracked, worn, blocked, damaged, or no longer fits correctly in the mixer assembly.
Product details
Brand: Sielaff
OEM part number: 4040032900
Product type: Mixer air extraction component...
This guide spiral is used in compatible vending machines to guide products during the dispensing cycle. It is usually replaced when the spiral is bent, worn, damaged or no longer supports correct product movement in the vending tray.
Product details
Product type: Guide spiral
Diameter: ø 65 mm
Pitch: P35
Direction: RH
Finish:...
This reinforced rear bushing is used with the soluble hopper scroll in compatible Saeco vending machines. It supports the scroll at the rear side and helps keep it correctly positioned during powder dosing. The bushing is usually replaced when it is worn, cracked, loose or no longer supports smooth scroll movement.
Product details
Product type:...
This door top module is used in the upper door section of compatible Necta Vending Evoca vending machines. It is usually replaced when the original module is cracked, scratched, damaged, worn, or no longer fits correctly on the door.
Product details
Brand: Necta Vending
Product type: Door top module
Dimensions: 632 x 109 mm...