Upgrade reliability with the NSK 6203 DDU. This rubber-sealed, deep-groove ball bearing fits countless catering machines thanks to its standard 6203 footprint and rugged contact seals.
Key features
DDU double seals – block water, dust and cleaning chemicals.
NSK precision – hardened raceways minimise vibration and heat.
Universal sizing – 40 mm OD, 17 mm ID, 12 mm width.
Food-safe grease – pre-lubricated, install and go.
Common equipment*
Brand
Example models
Brema / Emmepi
GB1540, GB902 icemakers
Dito Electrolux
XBE-10 mixer, TRS vegetable cutter
Fimar
RI-series dough stretchers, 22AE mincer
Aristarco
SP-N juice extractor
NSK bearing code
6203 DDU (contact-sealed both sides)
*List is illustrative – check your service manual or the original bearing stamp.
Quick installation guide
Lock out the machine and remove any belts or gears.
Press out the old bearing carefully to avoid shaft burrs.
Clean the bore; apply a light film of oil.
Press the new bearing by the outer ring only.
Reassemble, test-run and listen for silent rotation.
Need help verifying compatibility? Contact our parts team with your model and serial number.
Looking for similar items or different specifications for this NSK 6203 DDU Bearing 40×17×12 mm | Kitchen & Catering Machinery Part?
Explore our full range in the Horeca category
*
This part is compatible to the original part number. Part numbers are always leading.
Details
60-974-3063017
Data sheet
Type
Compatible (non-original)
Review
Comments (0)
No customer reviews for the moment.
Your review appreciation cannot be sent
Report comment
Are you sure that you want to report this comment?
Report sent
Your report has been submitted and will be considered by a moderator.
Your report cannot be sent
Write your review
Review sent
Your comment has been submitted and will be available once approved by a moderator.
The Fagor OEM 12024715 heating element is designed for use in professional pasta cookers. This robust component delivers 4000W at 230V and ensures consistent performance in demanding kitchen environments. Manufactured in China, it features durable construction and exact-fit dimensions.
OEM replacement part
Power: 4000W
Voltage: 230V
Length: 348...
Upgrade your vending or foodservice equipment with the Crouzet 82334051 gear motor, a direct OEM replacement for Wessamat 32302. Crafted in Germany for continuous commercial use, this compact motor delivers 3.5 W at 230 V 50 Hz and runs at 24 rpm. Its durable steel gearbox and precision bearings ensure smooth, quiet operation, while the Ø 6 × 10 mm shaft...
This high-quality overflow pipe, measuring ø 40x210 mm, is made of durable plastic and is designed for use with various Dihr and Angelo PO dishwashers and pan washers. Manufactured in Italy, this part ensures proper water flow regulation, preventing overflow, and optimizing the performance of your commercial kitchen equipment.
Compatibility:
Angelo...
Maintain safe boiler operation in your Meiko commercial dishwashers and glasswashers with this German-made 250V pressure switch. As an OEM Meiko spare, it ensures reliable performance and peace of mind in your kitchen.
Key Specifications
Voltage: 250 V
Origin: Germany
Type: Boiler pressure switch
OEM Meiko Part
Compatible Meiko Models...
This solenoid valve is used to control water flow in Animo filter coffee machines.
It has a 180° body configuration and an adjustable outlet with fixed flow control.
Made in Italy.
type: Elbi 329, 1 way
voltage: 220/240V, 50/60Hz
temperature limit: max 90°C
inlet connection: 3/4"
outlet connection: ø 10.5 mm
outlet adjustment: green flow...
Improve utensil cleaning capacity with the cutlery rack 500 × 500 × 105 mm (Comenda OEM 660504), crafted in Italy for commercial dishwashers.
Key features
Holds 60–80 cutlery items securely
Robust plastic construction resists corrosion and cleaning chemicals
Grid-style compartments prevent overcrowding and ensure thorough...
This tap head is used on Animo thermos boilers and is part of the hot water dispensing tap assembly. Suitable for systems with a 1/2" connection.
connection size: 1/2"
type: tap head
origin: made in Italy
compatibility
Animo thermos:
WKI-60 (200809-Rev.3)
This electric heating element is rated at 3000W and operates at 230V. With an external diameter of 205 mm, internal diameter of 192 mm, and a flange size of 70×22 mm, it is specifically designed for Wiesheu Wiwa ovens. Manufactured in Italy, this element ensures efficient heating performance and reliable operation in commercial bakery environments....