NSK 6204 DDU Bearing 47×20×14 mm | Commercial Kitchen Part

Upgrade or repair your machine with an original NSK 6204 DDU deep-groove ball bearing. Full-contact rubber seals defend against wash-down spray, flour dust and cleaning chemicals common in busy kitchens.

Benefits at a glance

• DDU seals – contact rubber on both sides for maximum protection.
• NSK engineering – heat-treated steel raceways for durability and low noise.
• Standard ISO 6204 – 47 mm OD × 20 mm ID × 14 mm width.
• Grease packed – install and run with no additional lubrication.

Where you’ll find it*

*Always confirm the bearing number 6204 DDU or measure the existing part before purchase.

Fast swap guide

1. Isolate electricity and secure moving parts.
2. Extract old bearing; avoid shaft damage.
3. Clean housing and add a light oil film.
4. Press the new bearing by the outer ring only.
5. Re-assemble components and run a brief test.

Questions on compatibility? Contact us for expert assistance.