Nuova Simonelli Aurelia V dosing device

The capacitor on this product page is made by the Italian company Ducati Energia. The Capacitor provides 45µF at 450V 50/60Hz. This specific model is a version with the cables attached to the capacitor. The length of this 1 pole cable is 250mm. The outer diameter is 45mm and the length is 117mm. The capacitor can operate at -25 degree C all the way up to...

Nut 3/8"F h5 24mm

The item on this page is a valve shaft fitting. This brass machined item holds the valve assembly together. This specific valve shaft fitting is for the standard Rancilio steam valve used on a variety of models. So this item does not fit the C-Lever valve. The Rancilio part number for this item is 23224002  You will find this valve shaft fitting on...

The touch panel membrane on this page is used on the La Spaziale S3 espresso machine.  This membrane has 5 selection options, 2 for single coffee, 2 for double coffee and one for continues (the on/off key). This item is only the 5 button membrane, the circuit board which is behind it (part number 06001 ) is not part of this item and needs to be...

The item on this product page is a conical PTFE gasket. This PTFE gasket can be used on various steam and water valves on Elektra espresso machines. The Elektra part reference for this item is 01178035  This conical PTFE gasket has a outer diameter of 12mm a inner diameter of 5mm and a thickness of 5mm. This item has been made in Italy. You can use...

On this product page you will find a La Spaziale shower support and diffuser. This support holds your shower screen on the correct location and it pre-spreads the water before it goes true the shower screen in the La Spaziale brewing group. The La Spaziale part number for this item is 01942  This diffuser has a external diameter of 53mm a...

Over time the one of the connecting legs of a Gicar control box can break and the brains of your espresso machine are rattling around in the espresso machine. Instead of buying a entirely new unit you can just replace the case of dosing device. This electronic board case has been made from black plastic. There are on the outside 4 mounting holes for...

On this page you will find the Mazzer burr adjustment ring. When you want a finer or coarser setting on your Mazzer burrs, you just need to turn this brass and threaded adjustment ring inward or outward. You can do this with the adjustment ring pin, with a m5 thread, which stick into the side of the burr adjustment ring(S00SPEA00) on various locations of...