Nuova Simonelli Mythos grind adjustment knob

These original Eureka grinding blades can be used on some Eureka and Nuova Simonelli coffee grinders. This item always comes in a Eureka packaging This specific model grinding blades has a base of tool steel base and over it a Titanium layer applied. This layer of Titanium is much harder then the tool steel and has a low friction coefficient. So these...

This burr holder is used on a couple of coffee grinder brands. Nuova Simonelli (15080009 ) and Eureka(2520.0005). On this part the bottom burr (15030057) is also attached with 3 screws. This is also the rotating burr, seen it is attached to the motor shaft. On which grinders can I use this burr holder? On the Nuova Simonelli MDL, Nuova Simonelli MDLCA and...

This type of switch is used on the timer version of the Victoria Arduino Mythos coffee grinder. This specific item is a OEM/original Victoria Arduino spare part.  The part reference number for this item is 15030095. You push with your portafilter against this switch, and the grinding process will start.

This microswitch is used on Nuova Simonelli and Victoria Arduino Mythos coffee grinders. This switch indicates if the coffee hopper is installed, otherwise the grinder won’t work. The part reference number for this item is 15030002.This microswitch is rated up to 10A at 250V

On this page you will find a black bipolar switch with a red indicator light in it. This is quite a common switch model; you can find this model on a variety of espresso machines and coffee grinders. this switch is rated at 16A at 250V. This switch mounts in a hole with the dimensions 22x30mm Brands which use this type of switch in their espresso...

The coffee collecting tray is a standard item with most coffee grinders. Also, with the Nuova Simonelli and Eureka Mythos.  This is a plastic coffee collecting tray which slides into the frame of the coffee grinder. It can be removed easily to clean the coffee collecting tray The part number for the Eureka Mythos is 4100.0009 and for the Nuova...

This capacitor is a OEM/Original spare part for Nuova Simonelli and Victoria Arduino coffee grinders. The Part reference number for this item is 15030027 This specific capacitor is used on the 110V versions of the Mythos grinders. It produces 60uf and it is used for single phase motors. This capacitor has been made in Italy.

This hopper is especially made for the Eureka and Nuova Simonelli Mythos coffee grinder. This hopper comes as a complete set. The hopper itself, the inner protection on the inside, the lid of the hopper and the shutter to close off the hopper at the bottom. This hopper is suitable for the Eureka Mythos with part number 4000.0000 and the Nuova Simonelli...