O ring silicone 1,78x7,66mm

The item on this product page is a O-ring which can be used on various espresso machine brewing groups. This o ring can be used on brewing groups and water inlets of the brand Cimbali and Faema.  The part references can be found in the extra info tab. This o ring is made from the material FKM. The cord diameter is 2,62mm and has a internal diameter...

The Ma-Ter XP 200A pressure switch. Is more uncommon model in the Ma-ter espresso machine switch assortment. This type of double pressure switch is used on La Carimali espresso machines. The thread used a ¼” BSP-G. The pressure reach is 0,5-1.5bar. It is pre-set at 1,4 bar. The switches are both rated for 16A at 125/250V. The Ma-ter XP...

The connection between the circuit board of the espresso machine and the touchpanels is made with a ribbon cable. This specific cable is used for VA espresso machines with 3 brewing groups. It has 10x2 connectors. This specific item is a OEM/original Victoria Arduino spare part and has the part reference number 04000853. This item is made in Italy This...

The conical grinding burr set on this product page is used on various Fiorenzato coffee grinders. This set off burrs is a OEM/Original Fiorenzato part. The Fiorenzato part reference number for this set is 400000002. These grinding burrs are from the conical type and turn clockwise (right). The external diameters are 63 and 34mm the internal diameters are...

On this page you see a steam and water valve bushing/gasket for various Faema espresso machine models the Faema part reference for this item is 4161132346. On one side of this PTFE seal is a conical shape, this is for the ball of the steam tube or water tube. The other side of this gasket is flat for the brass washer. There is a indendation to hold a o...

The capacitor on this product page is made by the Italian brand Ducati Energia. This specific model is a 4.5 µF model, which can run up to 450V 50/60Hz. The operating temperature is from -25 Degree C up to 85 degree C. The connectors have a width of 6,35mm and a thickness of 0,8mm. This capacitor has a M8 thread on the end. The outer diameter is 28mm...

On this page you will find a brass Bezzera gasket holder, which is suitable for a variety of Bezzera espresso machine models. The Bezzera part references for this item are 7496003 and 5970504. This brass gasket holder normally holds the gasket with the dimensions 19x3.5x4mm, this item does not come with this gasket. To hold this gasket in place...

The drain tub on this page is one of the most commonly used ones on Astoria and Wega espresso machines. The part is a OEM/Original spare part for Astoria and Wega espresso machines. The Astoria part number is 15502 and the Wega part number is WY15502. This drain cup has been made from a plastic. The outer diameter of the cup is 80mm. The hose...