Bring factory-level precision back to your high-output Rocket Espresso machine with this 2-way solenoid valve, part M199905794. Using 1/8″ female threads and a 1.5 mm orifice, the valve delivers lightning-fast on/off control up to 15 bar, keeping pressure stable and preventing drips during fill, mix, or discharge cycles. An FKM elastomer seal withstands aggressive water chemistry and temperatures from -40 °C to +140 °C, while the matched 491514Q3 D4G coil draws just 13 / 11 W at 220-240 V, 50-60 Hz for cool, quiet operation. Built in Italy from food-grade brass, it installs in minutes and stands up to thousands of duty cycles without sticking or leaking.
Key Features & Benefits
Precise 2-way flow control — 1.5 mm orifice balances rapid response with optimal throughput
Universal 1/8″ F × 1/8″ F ports — direct swap on Rocket commercial and prosumer lines
FKM seal, 15 bar rating — resists scale, heat and aggressive descaling solutions
Low-consumption coil (13 / 11 W) — efficient, low-temperature actuation on 230 V mains
Wide fluid range (-40 °C → +140 °C) — reliable performance from iced rinse cycles to super-hot steam paths
Compatibility
Boxer 2014, Boxer (202009-), Boxer (202405-)
Doppia (202407-)
R8 (201711-) & R8V (201711-)
R9 (201702- / 202311-)
R9V (202004- / 202211-)
R Nine One & R-Nine-One (202009- / 202211-)
RE A 2014 / 2016; RE-A (201912- / 202207-)
RE-Doppia (201910- / 202002-)
RE-S (201802-)
RE-Timer (201806- / 202207-)
Upgrade today and keep your Rocket Espresso machine running smoothly with factory-fresh flow control.
Looking for similar items or different specifications for this Rocket Espresso Solenoid Valve M199905794 – 2-Way 1/8″ 230 V (with Coil)?
Explore our full range in the Rocket category
*
This part is compatible to the original part number. Part numbers are always leading.
Stop the steamy hiss and messy spray that follow every shot with this factory exhaust jet breaker, part R000002148. Threaded directly onto the E61 exhaust port, the precision-bored diffuser slows and redirects waste water from the 3-way solenoid, so it drains silently into the drip tray instead of splashing your bench. Machined from corrosion-proof...
Refresh your café’s milk station with this precision steam tap, part M229905536. Engineered for Rocket’s Boxer and RE commercial lines, the valve arrives fully assembled, featuring a 1/4″ male rear inlet and a 3/8″ male ogive outlet that mates directly with the stock steam pipe. A finely-threaded spindle, PTFE seat and high-temp O-rings give you...
This genuine Rocket Espresso 3/8 BSPP male to 1/8 BSPP male fitting, part A229904374, bridges mismatched thread sizes when installing gauges, sensors or drain lines. Machined from food-grade OT58 brass, it seals tight with minimal PTFE tape and its compact shoulder clears tight boiler spaces.
Key Features & Benefits
Low-lead OT58 brass –...
Keep every joint in your espresso machine drip-free with this original Rocket Espresso copper gasket, part C479900228. Precision-machined for ¼-inch connections, the annealed copper washer compresses to fill microscopic surface imperfections, guaranteeing a gas-tight, steam-tight seal even under boiler temperatures and pump pressure. Copper’s natural...
Keep every puck evenly saturated with this genuine Rocket Espresso group-head shower, part M619905432. Precision-machined spray holes distribute water in a perfectly uniform cascade, eliminating channeling and boosting crema production. Hardened, food-grade stainless steel resists scale and chemical cleaners, while the double-layer design maintains...
Reclaim lightning-fast steam recovery and rock-solid temperature stability with this factory-spec service-boiler heating element, part A110004667. Rated at 1400 watts / 230 volts, the two-pole element plunges 105 mm into the boiler for efficient heat transfer, while the robust 1″ 1/4 BSP thread ensures a leak-free seal under daily pressure cycles. Built...
Give your flagship R Nine One a fresh electronic heartbeat with this factory-tuned control board, part M199906288. Designed to run flawlessly on both 230 V and 115 V supplies, the PCB synchronises pumps, heating elements and pressure-profiling algorithms with the split-second precision that defines Rocket’s statement machine. Robust copper traces handle...
This original control board from Rocket Espresso is built for machines produced before 2018. It operates at 230/240V and 50/60Hz, delivering dependable control and functionality. Made in Italy for assured quality and durability.
OEM part number: A190004524
Voltage: 230/240V
Frequency: 50/60Hz
For machines manufactured before 2018
Made in Italy...
