The Sirman compatible 12-7A single-phase PC board 220V 50/60Hz is a high-quality replacement
electronic board for the control and power section of professional Sirman machines. It restores
correct power management, start/stop control and safety functions so your equipment can operate reliably in
daily HoReCa use.
This single-phase PCB is designed for 220V 50/60Hz installations and has compact external
dimensions of approximately 128 x 40 mm. It is a compatible replacement for the original
Sirman 12-7A board used on a wide range of machines, including blenders, cutters, graters, ice crushers,
potato peelers, slicers and vegetable/mozzarella cutters. The board is Made in Italy.
Always compare the 12-7A designation, voltage rating, dimensions and connector layout with your original
board and the technical documentation before ordering.
Technical features
Brand compatibility: Sirman compatible
Part type: 12-7A single-phase PC board / control PCB
MIRRA 220 C CE, MIRRA 220 CE, MIRRA 250 C CE, MIRRA 250 CE
MIRRA 275 C CE, MIRRA 275 CE, MIRRA 275 CE VERT., MIRRA 300 CE
OPALE 300 CE
QUARZO 250, QUARZO 275, QUARZO 300
SELCE 350 CE, SELCE 370 CE
VAS 250 CE, VAS 275 CE, VAS BS 300 CE, VAS BS 350 CE, VAS BS 370 CE
VCO 250 CE, VCO 275 CE, VCO 300 CE
VCS 300 CE, VCS 350 CE, VCS 370 CE
Compatible Sirman vegetables/mozzarella cutters
ATHOS CE
TM COP. ALL CE
TM COP. INOX CE
Always verify the 12-7A designation, the 220V 50/60Hz rating, the
128 x 40 mm board dimensions and the connector layout with the technical documentation of
your machine before ordering.
These items are specially ordered and can not be cancelled nor returned.
Looking for similar items or different specifications for this Sirman compatible 12-7A single-phase PC board 220V 50/60Hz?
Explore our full range in the Horeca category
*
This part is compatible to the original part number. Part numbers are always leading.
Details
64-102-9014084
Data sheet
Type
Compatible (non-original)
Review
Comments (0)
No customer reviews for the moment.
Your review appreciation cannot be sent
Report comment
Are you sure that you want to report this comment?
Report sent
Your report has been submitted and will be considered by a moderator.
Your report cannot be sent
Write your review
Review sent
Your comment has been submitted and will be available once approved by a moderator.
This low-wattage heating element is designed for Zanussi refrigerated cupboards and freezers. It delivers 20.8W at 230V and is Made in Serbia. It has a total length of 3000 mm with a heated section of 2000 mm.
Voltage: 230V
Power: 20.8W
Overall length: 3000 mm
Hot section length: 2000 mm
Made in Serbia
Compatibility
Zanussi – Refrigerated...
Original Unox OEM heating element kit for professional ovens. Designed to provide efficient and consistent heating performance, ensuring optimal cooking and baking results. Supplied complete with gasket and adhesive for easy installation. Made in Romania.
Technical details
Brand: Unox
OEM reference: KRS1150A
Power: 4900 W
Voltage: 230 V...
This SPM OEM upper gear wheel is used in the drive system of the granita machine to transfer movement between internal components. It is replaced when the gear teeth are worn, damaged or no longer transmit movement correctly.
Product details
Brand: SPM OEM
OEM part number: 02.BA0049.002
Product type: Upper gear wheel
Made in Italy...
This Ceme solenoid valve is used to control the flow of gas or fluid inside professional equipment. It is replaced when the coil fails, the valve no longer opens or closes correctly, or leakage occurs around the internal seal or body.
Product details
Brand: Ceme
Ceme part number: 5925TE20D121W7
Product type: Solenoid valve
Series:...
PEL 777090, 777111, and 777120 Gas Tap 21/S valves deliver reliable pilot-flame ignition with a Ø 21 mm pipe-flange inlet, M16×1.5 mm outlet, M9×1 thermocouple port, and D-shaped pin Ø 8×6.5 mm for precise, leak-proof installation.
Key Features
Pilot Flame Port: Continuous ignition support
Standard Fittings: Ø 21 mm flange inlet and M16×1.5 mm...
Keep your commercial dishwasher running at peak performance with this boiler Ø 150 × 450 mm, precision-engineered and Made in Italy. Its compact footprint and OEM-style mounting flanges allow seamless replacement in a wide range of Comenda and Hoonved machines. Constructed from industrial-grade stainless steel and fitted with high-efficiency insulation,...
The Rational OEM 87.00.000 Complete Front Panel is an original replacement component designed for compatible Rational professional ovens. Manufactured in Germany, this complete front panel is suitable for the Rational electric steam ovens and steam ovens listed below. Always verify OEM part number 87.00.000 together with the exact appliance model,...
Upgrade reliability with the NSK 6203 DDU. This rubber-sealed, deep-groove ball bearing fits countless catering machines thanks to its standard 6203 footprint and rugged contact seals.
Key features
DDU double seals – block water, dust and cleaning chemicals.
NSK precision – hardened raceways minimise vibration and heat.
Universal sizing...