The Sirman OEM 19560202 suction foot with shaft M8 is a genuine support foot for
professional Sirman slicers. It helps to stabilise the machine on smooth work surfaces,
reducing vibration and movement during cutting and improving safety and comfort in daily HoReCa use.
This original Sirman OEM suction foot is equipped with an M8 shaft with an
approximate length of 15 mm and a suction base of about ø 47 mm with a
height of 42 mm. The geometry and mounting match the factory-supplied foot wherever OEM
reference 19560202 is specified in the Sirman parts documentation. It is used on a wide range
of Sirman slicers, including Agata, Automatica, Gemma, Ingranaggi, Leonardo, Palladio, Quarzo, Selce,
VAS, VCO and VCS models (see below). The part is Made in Italy. Always verify the OEM
code, shaft and base dimensions with the technical documentation of your machine before ordering.
Technical features
Brand / OEM: Sirman OEM 19560202
Part type: Suction foot with shaft M8
Shaft thread: M8
Shaft length: approx. 15 mm
Base size: approx. ø 47 mm, height 42 mm
Function: Provides anti-slip support and reduces vibration
Use: Professional HoReCa slicers
Origin: Made in Italy
Compatible Sirman slicers
AGATA 250, AGATA 250 CE, AGATA 275, AGATA 275 CE
AGATA 300, AGATA 300 CE, AGATA 300 V CE, AGATA 330 CE
QUARZO 275, QUARZO 275 CE, QUARZO 300, QUARZO 300 CE
SELCE 350, SELCE 350 CE, SELCE 350 UL
SELCE 370, SELCE 370 CE, SELCE 370 UL
VAS 250 CE, VAS 275 CE, VAS BS 300 CE, VAS BS 350 CE, VAS BS 370 CE
VCO 250 CE, VCO 275 CE, VCO 300 CE
VCS 300 CE, VCS 350 CE, VCS 370 CE
Always verify the M8 shaft, the 15 mm shaft length and the
ø 47 x 42 mm base dimensions with the technical documentation of your slicer before ordering.
These items are specially ordered and can not be cancelled nor returned.
Looking for similar items or different specifications for this Sirman OEM 19560202 suction foot with shaft M8?
Explore our full range in the Horeca category
*
This is a OEM/original spare part. Part numbers are always leading.
Details
64-105-9012017
Review
Comments (0)
No customer reviews for the moment.
Your review appreciation cannot be sent
Report comment
Are you sure that you want to report this comment?
Report sent
Your report has been submitted and will be considered by a moderator.
Your report cannot be sent
Write your review
Review sent
Your comment has been submitted and will be available once approved by a moderator.
This Gicar timer board controls cycle timing in commercial dishwashers, glasswashers and utensil washers. It is replaced when the machine no longer follows the correct wash timing, does not start phases properly, or shows unstable electrical control.
Product details
Brand: Gicar
Part number: 9.2.20.79G00
Product type: Timer board...
The Pressure Switch 1 Level by Aristarco is a precision-engineered component made in Italy, set to activate at 28 mbar and reset at 12 mbar, with a rating of 250 V 16(4) A. It delivers dependable overfill protection and consistent performance across Aristarco dishwashing and glasswashing equipment.
Key Features
Setting: 28 mbar...
Maintain peak condensate removal in your icemaker fleet with the Icematic Electric Pump CM19550109/0, precision-crafted in Italy. Running on 230 V 50 Hz, it ensures reliable drainage and quiet operation. Compatible with key Barline, Bul, and Scotsman models, it’s the go-to solution for high-volume ice production environments:
Compatible Models...
The Unox OEM KEL1361A RPE 1-Way 180° Solenoid Valve is a high-quality Italian-made OEM component designed for precise water control in commercial ovens. It operates at 220/240V 50/60Hz, with a maximum temperature of 90°C. The valve features a quick connector input ø 8 mm and quick connector output ø 10 mm, ensuring fast installation and reliable...
The Timer 11903F3 3 Cams from Elettromeccanica CDC delivers a precise 80-minute timing cycle for commercial ovens. Rated at 230 V, 50/60 Hz, its three-cam electromechanical design and robust D-shaped pin (Ø 6×4.6 mm) ensure consistent performance and long service life.
Key Features
Model: 11903F3EVE0000000
Cams: 3
Cycle time: 80 minutes...
The Bone Saw Blade 2020xh16 mm Diamond-Coated features diamond tips with a width of 0.50 mm, a teeth distance of 6.35 mm, and 4TPI for smooth and precise cutting. Made in Italy, this blade provides optimal performance and long-lasting durability for bone cutting in commercial kitchen equipment.
Dimensions: 2020xh16 mm for compatibility with bone...
This robust 24V mixer motor is manufactured in Italy for use in a wide range of Necta Vending EvoCA vending machines. It ensures reliable operation for mixing systems in popular models, offering a perfect replacement or upgrade for your vending machine maintenance needs.
Voltage: 24V
Origin: Made in Italy
Application: Vending machine mixer motor...
This high-quality overflow pipe, with a diameter of ø 22 mm and a length of 168 mm, is made of durable plastic and is designed to fit a wide range of dishwashers and glasswashers. Manufactured in Italy, it ensures proper water flow regulation, preventing leaks and ensuring optimal performance of your machine.
Compatibility:
Amika Dishwashers: 3X,...