This stop buffer is designed for use in commercial dishwasher doors and hoods, providing reliable shock absorption and long-lasting performance. It protects both machine structure and hood alignment, reducing wear during daily operation.
Designed for commercial dishwashers
Effective shock absorption for hood/door
Long-lasting, wear-resistant material
For hood-type, pull-through, and utensil dishwashers
Looking for similar items or different specifications for this Stop buffer for door and hood for Amika and Apach dishwashers?
Explore our full range in the Horeca category
*
This part is compatible to the original part number. Part numbers are always leading.
Details
60-384-3346135
Data sheet
Type
Compatible (non-original)
Review
Comments (0)
No customer reviews for the moment.
Your review appreciation cannot be sent
Report comment
Are you sure that you want to report this comment?
Report sent
Your report has been submitted and will be considered by a moderator.
Your report cannot be sent
Write your review
Review sent
Your comment has been submitted and will be available once approved by a moderator.
The De Jong Duke OEM 6DCN471 container with a height of 220mm is designed for secure and efficient ingredient storage in De Jong Duke vending machines. Made from durable materials, this genuine spare part offers reliable performance and simple installation, making it perfect for both maintenance and replacement needs.
OEM 6DCN471 part number...
Upgrade your professional kitchen’s ignition system with the OLIS 1936100 Piezo Ignitor [C], designed and manufactured in Italy:
Part Number
OLIS 1936100 for easy cross-reference and reordering
Reliable Spark Generation
Built-in piezoelectric module delivers over 50,000 ignition cycles
Instant, high-energy spark for...
This heating element is designed for use in convection ovens and hot cupboards. It has an external diameter of 190 mm, an internal diameter of 178 mm, and a total height of 93 mm. Equipped with a 70×22 mm flange.Made in Italy.
Power: 2500W
Voltage: 220V
External diameter: Ø 190 mm
Internal diameter: Ø 178 mm
Total height: 93 mm
Flange size:...
The Programmer 11901F1 1 Cam from Elettromeccanica CDC provides a fixed 20-second cycle for Angelo Po dishwashing equipment. Manufactured in Italy, it operates at 230 V, 50/60 Hz and uses a single-cam electromechanical mechanism with a D-shaped drive pin (Ø 6×4 mm) for precise, reliable timing.
Key Features
Model: 11901F3CEE0000000
Cycle...
Ensure secure and reliable operation of your combi oven door with this precision-engineered 43 mm handle pin. Designed as a direct replacement for Rational professional ovens, this OEM part (24,00,142P) guarantees perfect fit and performance.
Features
Exact OEM Replacement: Rational part 24,00,142P
Durable Construction: Hardened stainless...
Original Unox OEM penetration probe PT100 for precise internal temperature measurement in professional Unox ovens. Ensures accurate cooking control and uniform results. Made in Italy.
Technical details
Brand: Unox
OEM reference: KTR1041A
Type: Penetration probe PT100
Probe length: 100 mm
Cable length: 2000 mm
Connection: 2 wires with...
This SPM OEM timer board controls timed machine functions in the granita machine. It is replaced when the machine no longer follows the correct timing, shows unstable control behaviour or the original board has an electrical fault.
Product details
Brand: SPM OEM
OEM part number: 04.IP0017.001
Product type: Timer board
Suitable for...
The Animo OEM 03417 level glass is an original replacement part made for Animo filter coffee machines. With a diameter of Ø12 mm and a length of 262 mm, it allows clear visibility of the water level in the boiler.
OEM code: 03417
Type: Level glass
Dimensions: Ø12x262 mm
Origin: Made in China
Compatibility
ANIMO — Filter coffee machine...