This Ulka vibratory pump is used in the water supply circuit of compatible Necta Vending Evoca vending machines. It is usually replaced when the original pump is noisy, leaking, blocked, weak, damaged, or no longer delivers the correct water pressure.
Product details
Brand: Ulka
Product type: Vibratory pump
Model: EP8GW
Power: 26 W
Voltage: 230 V
Frequency: 50 Hz
Fittings: ø 1/8" - ø 6 mm
Maximum pressure: 15 bar
Maximum water temperature: 35 °C
Integrated diode: 1N 4007P
Connector terminal: 6.3 x 0.8 mm
NSF approved
Made in Italy
Compatibility
Necta Vending Evoca
Vending machine:
Brio series:
Brio-3-ESP
Canto series:
Canto-Classic-Espresso (201802-)
Canto-Classic-Instant (201802-)
Canto-Espresso (201802-)
Canto-Espresso-Fresh-Brew (201802-)
Canto-Fresh-Brew (201802-)
Canto-Instant (201802-)
Canto-Touch-DC (201810-)
Canto-Touch-Espresso (201610-)
Canto-Touch-Espresso-Fresh-Brew (201610-)
Concerto series:
Concerto-Touch (201910-)
Kikko series:
Kikko-RY-Espresso-Instant
Korinto series:
Korinto-ES-IN (201701-)
Korinto-Espresso-Instant (201507-)
Korinto-Fresh-Milk (201507-)
Koro series:
Koro-Espresso-Instant (201601-)
Koro-Prime-Espresso (201706-)
Koro-Prime-Espresso-Fresh-Milk (201706-)
Krea series:
Krea-Espresso (201706-)
Krea-Espresso-Fresh-Brew (201706-)
Krea-Instant (201706-)
Krono series:
Krono
Opera series:
Opera-Touch (201910-)
Solista series:
Solista-Espresso (202012-)
Looking for similar items or different specifications for this Ulka EP8GW vibratory pump 26 W 230 V?
Explore our full range in the Vending category
*
This part is compatible to the original part number. Part numbers are always leading.
Details
65-648-1331028
Data sheet
Type
Compatible (non-original)
Review
Comments (0)
No customer reviews for the moment.
Your review appreciation cannot be sent
Report comment
Are you sure that you want to report this comment?
Report sent
Your report has been submitted and will be considered by a moderator.
Your report cannot be sent
Write your review
Review sent
Your comment has been submitted and will be available once approved by a moderator.
This mixer motor assembly is used in De Jong Duke vending machines to drive the mixer system. It includes the base plate 4KMX041 and is usually replaced when the mixer motor no longer runs correctly, becomes noisy, or the assembly is worn or damaged.
Product details
Brand: De Jong Duke
OEM part number: 6ZBR097
Product type: Mixer motor...
This 10-button push-button panel is used in the front control section of compatible Necta Vending Evoca vending machines. It is usually replaced when the original panel is worn, damaged, cracked, unresponsive, or no longer operates the buttons correctly.
Product details
Brand: Necta Vending
Product type: Push-button panel
Number of...
This OEM pump is used in the water supply circuit of compatible Necta Vending Evoca vending machines. It is usually replaced when the original pump is noisy, leaking, blocked, weak, damaged, or no longer delivers the correct water flow or pressure.
Product details
Brand: Necta Vending Evoca
Product type: Pump
Compatibility
Necta...
This gasket set is used in compatible Sielaff vending machines to seal the related machine section correctly. It is usually replaced when the existing gasket is worn, damaged, compressed, leaking, or no longer provides a proper seal.
Product details
Brand: Sielaff
OEM part number: 3160000900
Product type: Gasket set
Dimensions: 942.5...
This hose clamping valve is used to open or close the flow through a hose in compatible Sielaff vending machines. It is usually replaced when the valve no longer clamps correctly, is electrically faulty, damaged, or causes flow-related faults.
Product details
Brand: Sielaff
OEM part number: 4040094900
Product type: Hose clamping valve...
This mixer front plate is used in the mixer section of compatible Necta Vending Evoca vending machines. It is usually replaced when the original plate is cracked, worn, damaged, loose, missing, or no longer supports the mixer components correctly.
Product details
Brand: Necta Vending
Product type: Mixer front plate
Compatibility...
This boiler cover stopper is used in the boiler cover section of compatible Necta Vending Evoca vending machines. It is usually replaced when the original stopper is worn, damaged, leaking, hardened, missing, or no longer seals or fits correctly.
This group of two ODE solenoid valves is used to control water flow in compatible Lavazza vending machines. It is usually replaced when one or both valves are leaking, blocked, damaged, or no longer open and close correctly.
Product details
Brand: ODE
Product type: Group of 2 solenoid valves
Valve configuration: 3-way
Voltage: 24 V...