Angelo Po 091FR1ID fryer parts
The Angelo Po 091FR1ID is one of the most important service models within the older 091/191 fryer family.
Factory documentation identifies it as:
- Professional gas fryer
- Single frying well
- Capacity: approximately 22 litres
- Gas input: approximately 21 kW
- Electronic/digital control
- 230 V electrical supply for the control system
- Electronic ignition and flame monitoring
Because this is a gas fryer with electronic controls, its service components differ significantly from a mechanically controlled 091FR1G or an electric 091FR1E.
Angelo Po 191FR2ID fryer parts
The 191FR2ID is the double-well equivalent of the 091FR1ID concept.
- Professional gas fryer
- Two frying wells
- Capacity: approximately 22 + 22 litres
- Total gas input: approximately 42 kW
- Electronic control
- Independent left/right well components
On a 191FR2ID, a fault affecting only one side should be diagnosed within that well's burner, ignition, temperature-sensing and control circuit before parts from the other side are replaced.
091 and 191 fryer model filters
Useful compatibility filters within this category include:
- 091FR1ID
- 091FR1I
- 091FR1IA
- 091FR1G
- 091FR1GD
- 091FR3G
- 091FR3GD
- 091FR1E
- 091FR1EA
- 091FR1ED
- 091FR3E
- 091FR3ED
- 191FR2ID
- 191FR2I
- 191FR2G
- 191FR2GD
- 191FR4G
- 191FR4GD
- 191FR2E
- 191FR2ED
- 191FR4E
- 191FR4ED
These codes are much more useful as filters than as individual SEO landing pages because many service parts overlap between related 091 and 191 configurations.
Understanding 091FR1ID, 091FR1I and 091FR1IA
Angelo Po documentation groups 091FR1I, 091FR1ID and 091FR1IA within the 22-litre gas fryer family.
The final letters matter because they can identify differences in control and production configuration.
For service work, always retain the complete model number and, where available, the production version such as VERS 05-2012.
Angelo Po OEM 3106671 ignition and flame-detection kit
Brooks Parts supplies original Angelo Po OEM 3106671, a combined detection and ignition plug kit.
The kit includes:
- 2 plugs: ignition and flame detection
- Plug diameter: approximately Ø9 mm
- Plug body length: approximately 60 mm
- Overall lengths: approximately 115 mm and 135 mm
- Mounting plate: approximately 56 x 22 mm
Documented compatibility includes:
- 091FR1I
- 091FR1IA
- 091FR1ID
- 191FR2I
- 191FR2ID
- 091FR1I VERS 03-2012
- 091FR1ID VERS 05-2012
- 191FR2I VERS 03-2012
- 191FR2ID VERS 09-2012
This is an original Angelo Po OEM spare part. The OEM number should be the leading identification reference.
Ignition and flame detection on the 091FR1ID
The 091FR1ID uses electronic ignition and flame supervision rather than a simple permanently burning pilot arrangement.
When the fryer fails to ignite, possible causes can include:
- Ignition electrode
- Flame-detection electrode
- Ignition cable
- Ignition control unit
- Gas valve
- Burner
- Wiring or power supply
If the burner lights but the control does not detect a stable flame, the flame-detection circuit should be inspected rather than repeatedly attempting ignition.
Angelo Po OEM 3007720 8 kW fryer burner
Brooks Parts supplies original Angelo Po OEM 3007720, an 8 kW professional fryer burner.
The burner has documented compatibility with several 091 and 191 gas fryer configurations, including:
- 091FR1I
- 091FR1IA
- 091FR1ID
- 091FR1G
- 091FR1GD
- 091FR3G
- 091FR3GD
- 191FR2I
- 191FR2ID
- 191FR2G
- 191FR4G
- 191FR4GD
A large fryer can use more than one burner, so the burner's individual 8 kW rating should not be confused with the total rated gas input of the complete appliance.
Burner problems on Angelo Po 091 and 191 fryers
Slow heating
Inspect burner condition, gas pressure, burner ports and the complete combustion system.
Uneven flame
Check the burner for contamination or damaged flame openings and verify the correct gas specification.
Yellow flame or poor combustion
Stop normal operation and inspect burner cleanliness, air supply, injectors and gas pressure.
Electronic temperature control on 091FR1ID and 191FR2ID
The ID models use an electronic control architecture.
The appliance electrical diagrams include components such as:
- Electronic control board
- Temperature probe
- Safety thermostat
- Gas valve
- Ignition control
- Relays
- LC filter
- Burner control circuit
This is important during diagnosis. A fryer that does not heat may have a sensor, control-board, ignition or switching fault even when the burner itself is serviceable.
Temperature probes for ID fryers
Electronic 091FR1ID and 191FR2ID fryers use temperature sensing as part of the electronic regulation system.
When replacing a temperature probe, compare:
- Original Angelo Po number
- Sensor type
- Probe dimensions
- Cable length
- Connection type
- Production version of the fryer
Do not replace an electronic temperature probe with a mechanical capillary thermostat merely because both components measure temperature.
Safety thermostat for Angelo Po 091FR1ID
The safety thermostat operates independently from normal temperature regulation.
If excessive oil temperature is detected, the safety system disables fryer operation.
If the safety thermostat trips repeatedly, investigate the underlying fault instead of repeatedly resetting the device. Possible causes include incorrect temperature sensing, a control fault or incorrect fryer operation.
191FR2ID left and right well controls
The 191FR2ID has two wells and therefore additional left/right control architecture.
The electrical documentation distinguishes combustion control for the individual wells. When only one side fails, compare:
- Ignition sequence
- Flame detection
- Gas valve activation
- Temperature probe signal
- Safety thermostat
- Control output
This approach prevents unnecessary replacement of components on the correctly operating side.
Angelo Po 091 and 191 electric fryers
The same 091/191 family also includes electric machines.
Important examples include:
- 091FR1E – approximately 21 L / 18 kW
- 091FR1ED – electronically controlled 21 L version
- 091FR3E – approximately 9 L / 7.3 kW
- 091FR3ED – electronically controlled 9 L version
- 191FR2E – approximately 21+21 L / 36 kW
- 191FR2ED – electronically controlled double version
- 191FR4E – approximately 9+9 L / 14.6 kW
- 191FR4ED – electronically controlled double version
These electric fryers belong in the same 091/191 model cluster, but heating elements and gas components must of course remain separated by compatibility.
Angelo Po 091 and 191 fryer baskets
Basket dimensions vary with tank size.
A basket designed for a smaller 9- or 12-litre well should not automatically be used in a 21- or 22-litre fryer.
Always compare:
- OEM reference
- Basket length
- Basket width
- Basket height
- Handle design
- Well capacity
- Number of baskets per well
Common 091FR1ID faults
The control panel does not switch on
Check the electrical supply, fuses, wiring and electronic control power supply.
The fryer does not heat
Check temperature control, ignition sequence, gas valve, burner and safety devices.
The burner does not ignite
Inspect OEM 3106671 ignition/detection components, ignition control and gas supply.
The flame lights and then shuts down
Inspect flame detection, electrode position and burner flame quality.
The displayed temperature is incorrect
Check the temperature sensor, wiring and electronic control.
The safety alarm appears
Determine whether the safety thermostat or another monitored circuit has interrupted operation before resetting the fryer.
How to identify the correct Angelo Po 091/191 part
- Complete model: for example 091FR1ID
- 091 or 191 chassis
- FR1 / FR2 / FR3 / FR4 configuration
- E, ED, G, GD, I, IA or ID version
- Electric or gas heating
- Tank capacity
- Single or double well
- Production/version date
- Original Angelo Po OEM number
- Gas type and pressure where applicable
- Voltage for control components
- Probe and electrode dimensions
For machines such as 091FR1ID, the version date can be particularly useful because ignition and control components may differ between production generations.
Original and compatible Angelo Po 091/191 parts
Brooks Parts supplies both original Angelo Po OEM parts and selected compatible service components.
Important original references include:
- 3106671 – ignition and flame-detection plug kit
- 3007720 – 8 kW fryer burner
For thermostats, probes, baskets and gas-control components, always check whether the product offered is original Angelo Po or a compatible replacement.
091/191 versus current Angelo Po fryer models
The 091 and 191 codes belong to an older Angelo Po 900 mm fryer generation.
Current Angelo Po fryer ranges use newer model structures such as 0N1FR and 1N1FR. These newer models should remain in a separate current-generation category even when individual OEM parts overlap.
More Angelo Po fryer parts
For the complete brand assortment, visit Angelo Po fryer parts.
For other fryer manufacturers and component groups, browse professional fryer parts.
For other Angelo Po equipment, visit Angelo Po spare parts.
Angelo Po 091 & 191 fryer parts from Brooks Parts
Brooks Parts supplies Angelo Po 091 and 191 fryer parts for professional gas and electric fryers, with strong service coverage for important models such as 091FR1ID and 191FR2ID.
Use the full model code, production version and original Angelo Po OEM number to identify burners, ignition components, temperature controls, baskets and safety parts accurately.
