If you have a chrome plated or stainless steel steam tube and you want to move the tube when it is warm. It is likely that you will burn your hands. On this page you will find a rubber sleeve which prevents this. This sleeve can be used on a large selection of steam tubes which have a diameter of 8mm. The overall length of this sleeve is 50mm and has been manufactured in Italy.
How can I install this rubber sleeve? First remove the steam tip. Then you slide this rubber sleeve onto the steam tube. Always do this when your machine is cool.
Looking for similar items or different specifications for this Anti scorch rubber sleeve for steam wand 8mm 50mm?
Explore our full range in the Faema, Wega, Wega - Steam/water valve categories
*
This part is compatible to the original part number. Part numbers are always leading.
The portafilter gasket on this page is a original/OEM Astoria CMA portafilter gasket. This gasket is a original item for Astoria and Wega. This gasket notes CMA.
The outer diameter of this gasket is 72mm the inner diameter is 56mm and the thickness is 8mm. The gasket has 3 internal cuts.
You can use this gaskets on the brewing group Astoria Divina,...
The valve fitting on this page can be found on almost every Astoria and Wega steam and water valve. This coupling holds the steam axle and valve gasket holder in place when in use. The item screws into the valve body. The Astoria part number for this item is 25678001. The Wega part number for this item is WY25678001
You can find this fitting on...
This gasket has been made from the fibre material AFM 34 in Germany. This gasket has a outer diameter of 26mm a inner of 21 and a thickness of 2mm. This gasket is used in a variety of components throughout a espresso machine. The most common place where this coffee machine gasket is used, is in the Faema E61, Faema E61 legend and E61 style brewing groups....
On this page you will find a OEM/Original Astoria and Wega water inlet valve. The Astoria part reference for this item is 61006 and the Wega part reference for this item is WY61002. W10551 , WY61006 and WY6106.
This inlet valve has been made from casted and machined brass. There is one inlet point and 2 outlets. This vale does not come...
On this page you will find a heating element which can be used with various brands such as Grimac, Astoria and Wega. This specific heating element is used with single brewing groups. The Astoria part reference is 17200, the Grimac part reference is 1240100001-MG086 and the Wega part reference is WY17200.
This heating element produces 1200W with...
In some cases, the shower screen is attached with a screw, in most cases that is a Philips or a slotted screw. It is difficult to remove it with a regular screwdriver due to the limited height under the brew group.
But for that you need a shortened slotted screwdriver, in this case the one from the German brand Wera, which fits well under the brewing...
On this page you will find a bottomless portafilter which can be used on some Astoria and Wega espresso machines. Most of the brewing groups don’t use this type of portafilter.
This portafilter is only suitable for the Astoria and Wega brewing groups which have a 53mm group. The ears for the portafilter are oriented at a 90 degree angle and have a...
The dosing device on this page is suitable for various Astoria CMA group espresso machine models. This model is a 120V version. For Astoria the part number is 18090030 and for Wega the part number is WY18090030
This electronic dosing device is a OEM/Original spare part of Astoria CMA. This item is suitable from 1 group machines up to 3 group machines and...