€64.12 tax excl.
GDPR Compliance
Protecting your personal data
Shipping policy
Everything about shipping your order
Return policy
all the inns and outs about our return policy
The espresso machine heating element on this page is a used in various espresso machine models made by the Astoria CMA corporation. This heating element is mainly used on 1 group espresso machines. The Astoria part number for this item is 17001 and the Wega part number for this item is WY17001
This heating element produces 2000W at 110V. You can recognize most 110V heating elements on the red ceramics. White ceramics are normally used on the 230V heating elements.
The immersed length of the heating element is 175mm and it has 4 poles with screw threads. The flange has a width of 95mm and a height of 57mm. in the flange is also a spare tube installed to put a safety thermostat in the middle.
The heating element gasket size for this heating element has a outer diameter of 57mm a inner diameter of 43mm and a thickness of 3mm.
You can use this heating element on a 1 group Astoria Argenta, Astoria Brava, Astoria Denise, Astoria Dora, Astoria Lisa, Astoria Pratic, Astoria Rapallo and the Astoria Vania.
Data sheet
This does depend of which brand of espresso machine you have. Some espresso machine brands don’t use a heating element thermostat at all. Most thermostats are interchangeable with each other, but always make sure that you use a single phase or a 3 phase version, check out the thermostats we have on our website
Well first of all the heating element flange, seen those are in most cases not interchangeable with each other. seen a Cimbali heating element won’t fit a Nuova Simonelli heating element due to the flange model. A other important feature is the length of the heating element. When it is too long, it won’t fit. When the element is too short you will get uneven heat distribution in the boiler.
Well descaling a heating element is quite simple. A heating element can be placed inside a water tight tube. But the flange can not be submerged, the chance that water gets inside the heating element is possible. Which shorts out the element and makes it unuasable.
To descale a heating element you can use Puly caff Calcinet descaler, this need to be dissolved into hot water. First remove the loose lime scale. If it doesn’t remove all the limescale, repeat the procedure.
A heating element only comes with a gasket when this is specified. If this is not specified a heating element gasket isn’t supplied with the element.
