On this page you will find a portafilter gasket suitable for Wega espresso machines. The corresponding Wega part number for this item is W10322
This portafilter gasket has a outer diameter of 73mmm a inner diameter of 57mm and a thickness of 9mm. This gasket is made from NBR and has a shore number of 75.
This gasket can be used in the E61 style brewing group of Wega like the Wega Atlas, Wega Junior, Wega Mininova, Wega Polaris and on the Wega Start brewing group.
Looking for similar items or different specifications for this Wega portafilter gasket 73x56x9mm?
Explore our full range in the La Pavoni, Wega, La Pavoni E61 style 02 categories
*
This part is compatible to the original part number. Part numbers are always leading.
This shaft retaining ring is mainly used on the Astoria and Wega steam valve axles. This is done to keep the valve gasket holder attached to the valve axle. The part number used for this item by Astoria is 10001 and for Wega is it WY10001
This shaft retaining ring has a internal diameter of 6mm a external diameter of 12,3mm and a thickness of...
The steam valve knob on this page is a OEM/Original Wega knob. This valve knob is used with a variety of Wega models such as the Wega Atlas, Wega Combinova, Wega Junior, Wega Mininova, Wega Nova, Wega Polaris, Wega Syntesis and the Wega Start. The part reference for this item is WY15272
The fitting on this product page is a OEM/Original Astoria CMA spare part. This fitting is used on water inlet valves on the Astoria and Wega espresso machines. The Astoria part reference for this fitting is 25680 and the Wega part references are W10543 and WY25680.
This fitting is made from machined brass. The fitting has on both sides a male...
On this page you will find a OEM/Original Astoria and Wega water inlet valve. The Astoria part reference for this item is 61006 and the Wega part reference for this item is WY61002. W10551 , WY61006 and WY6106.
This inlet valve has been made from casted and machined brass. There is one inlet point and 2 outlets. This vale does not come...
this product is the end cap of a steam and water valve used on Astoria and Wega espresso machines. The Astoria part reference is 15029051 and the Wega part reference is WY15029051. This item is a OEM/Original Astoria Wega spare part and has been made in Italy.
This cover goes in combination with the steam and water valve knob with the Astoria part...
The item on this page is a upper water level fitting for the Astoria and Wega espresso machines. This item is OEM/Original spare part. The Astoria part number for this item is 53002 and the Wega part number is WY53002
This water level fitting has been casted out of brass and is machined afterwards. The fitting which is used to attach the water...
The single filterbasket model shown on this page is mainly used on Astoria and Wega espresso machines. Note: this basket can be used on any portafilter which has a similar 70mm outer diameter filterbasket. This single coffee filterbasket has been made by the Italian filterbasket manufacturer IMS Filtri, their reference number for this item is CM1T007....
Most of the pump driven espresso machines use a 3 way solenoid valve the control the brewing process. On this page you will find a ODE solenoid valve made by the Italian company ODE. The solenoid valve number is: 31A1AR15-VORV
This specific model is a flanged model. So it is bolted against a flat machined surface with 4 allen bolts. These surfaces are...