Flat cable 8 pole 900mm

Pin to pin IDC cable 16 pole 800mm

The item on this product page is a terminal block. These terminal blocks can be used in Gicar and Giemme dosing devices to connect the wiring to the dosing device. This terminal block has in total 10 poles with a pitch of 5,08. The maximum wire size for connecting is 2,5mm2. The maximum operating temperature is 80°C, the nominal voltage for this item is...

The cable on this product page is a connecting cable for various Vibiemme espresso machines. You use this cable between the dosing device and the touch panel.  The Gicar part reference number is 8.9.18.57G and the Vibiemme part reference number is ELETCAV8V800 The connector is a 8 pin connector and the length of the cable is 800mm. This item is made in...

The connection between the circuit board of the espresso machine and the touchpanels is made with a ribbon cable. This specific cable is used for VA espresso machines with 3 brewing groups. It has 10x2 connectors. This specific item is a OEM/original Victoria Arduino spare part and has the part reference number 04000853. This item is made in Italy This...

Pin to pin IDC 10 pole 800mm

Correct wiring for every electrical installation is the most important thing. So using the correct type of electrical wiring is really important. For Espresso machines you can not use standard wiring due to the higher air and contact temperatures inside the espresso machine. That is why the insulator of the wiring is made from silicone, which is...

The item on this product page is a terminal block. These terminal blocks can be used in Gicar and Giemme dosing devices to connect the wiring to the dosing device. This terminal block has in total 12 poles with a pitch of 5.08. The maximum wire size for connecting is 2,5mm2. The maximum operating temperature is 80°C, the nominal voltage for this item is...

 Flat Cable push button- electric box 8 Pole 1400mm