0
My cart
Best sellers
Fluid o tech clamp ring pump 100 L/H
The rotation pump on this page is made by the Italian manufacturer Fluid o tech, the pump type is designated as model “Standard” with the Fluid o tech manufacturer code: PA0104AGANN0000
This model of rotation pump is a clamp ring type. The pump face and motor face are pushed against each other and a stainless-steel clamp is place around it. This clamp is...
€109.59
Faema E61 microswitch 16A 250V
On this product page you will find a microswitch which can be used on the Faema E61 espresso machines. As well on the Faema E61 Legend espresso machines. The Faema part reference for this switch is Faema 532006600.
This switch is rated up to 16A at 250V. This switch has a spring loaded metal pin. This pin get’s pushed inwards when the lever of the group...
€41.19
Ducati Energia 45 µF 416.10.63.64 capacitor
The capacitor on this product page is made by the Italian brand Ducati Energia. This specific model is a 45 µF model, which can run up to 450V 50/60Hz. The operating temperature is from -25 Degree C up to 85 degree C. The connectors have a width of 6,35mm and a thickness of 0,8mm.
This capacitor has a M8 thread on the end. The outer diameter is 45mm and...
€8.00
Gaggia Baby / Classic portafilter gasket 72x57x8.5 original
On this product page you will find a OEM/Original portafilter gasket for various Gaggia espresso machines. Note: this is only for domestic Gaggia espresso machines. The Gaggia part reference for this item is NG01/001.
This portafilter gasket has a outer diameter of 72mm a inner diameter of 57mm and a thickness of 8,5mm. The gasket material used is red...
€9.04
Rocket water manifold
The item on this product page is a water inlet manifold, which is a OEM/Original Rocket spare part. The Rocket part reference for this item is A439905147
This drain cup has in total 3 hose connections and a grounding pin on the other side. In the bottom has a metal inert installed, so that the threads don’t wear out. This item has been made in Italy.
You...
€22.23
Mazzer machine foot M5x0.75
Almost every Mazzer coffee grinder has 4 individual feet to give it stability in harsh working environments. The feet are made up out of 2 parts. The feet itself. This is a rubber feet with a metal stud sticking out of it. This thread is a M5x0,75mm. The next part is the stainless steel cup which goes over the rubber feet. These feet are only sold per 4...
€7.42
La Cimbali Magnum on demand flat burrs
The grinding burrs on this product page can be used on the La Cimbali Magnum on demand espresso machine. The part reference for this item is 537-041-300. So they don’t fit for the Magnum doser version.
These grinding burrs have a outer diameter of 63,5mm and a internal diameter of 38mm. The thickness of these burrs is 9mm. There are in total 3 fixing...
€42.94
O ring gasket 15,88x2.62mm epdm
The o ring on this product page can be used on the Steam valve of various Bezzera domestic espresso machines. The Bezzera part reference for this item is 7496072.
This o ring has been made from EPDM. The cord diameter is 2,62mm and the internal diameter is 15,88mm. The o ring has been made in Italy.
You can use this o ring on the Bezzera Galatea Domus,...
€0.96
Bezzera bipolar switch 16A 250V
The switch on this page is used in the Bezzera B6000 espresso machine. The Bezzera part reference for this item is 7633331.
This switch has been rated up to 16A at 250V. The switch uses a mounting hole of 21x17mm. The push button itself is 17x13mm. The switch has been made in Italy.
€11.37
Fiorenzato F64E grinding blades burrs original
On this product page you will find a grinding burr set for the Fiorenzato F64E with the part reference 400000013. This is OEM/Original set of grinding burrs.
The outer diameter of this set off burrs is 64mm the internal diameter is 37mm and the thickness is 8,5mm. This set of burrs is hold on each side with 3 fixing screws. Note always use the original...
€119.39
Faema double portafilter with torpedo handle
The portafilte ron this product page can be used on a variety of Faema espresso machine models. The Faema part references for this item are 2771133837/457888020 and 902714000.
This double portafilter has a closed spout, the cover can be removed. The fitting of the spout is a 3/8” BSP-G thread. The ear orientation of the portafilter is 90 degree. The...
€55.68
Ball Valve 3/8 MF
On this product page you will find a ball valve. This valve has been manufactured in Italy. This type of valve is used with a variety of brands like Marzocco, Nuova Simonelli and Victoria Arduino. The part numbers used for this item are for la Marzocco L164, for Nuova Simonelli 09000016 and for Victoria Arduino 09000016
The valve is a MF...
€11.00
Faema E98/A restyling touchpanel
On this product page you will find a touchpad membrane for the Faema E98 President Restyling. But this item can as well be used on the La Cimbali M27-2008. The part number for this item is with Cimbali 915-400-000 and with Faema 915400000.
This item is different then the touchpanel of the Faema E98 President, the colour of that touchpanel is blue. And of...
€63.65
- Out-of-Stock
Stainless steel steam stem 2 holes 1,5mm
On this page you will find a steam nozzle which can be used in combination with some models of Faema, Casadio and La Cimbali.
The steam tube has a female 1/8”BSP-Gt thread. On each side of the steam tip there are 2 holes, both have a diameter of 1,5mm. There are 2 flattened spots on the nozzle, so that you are able to install a spanner on it when it is...
€9.77
Solenoid valve connector
The product on this page is a solenoid valve connector, large F fitting. With this connector you can seal off and connect your wiring and solenoid valve to each other.
These connectors can be used on all types of standard solenoid valve coils. Where the positive and negative are spaced apart approx. 17mm.
This solenoid valve connector can be basically...
€3.47
Fiorenzato Complete hopper orginal part
The coffee hopper on this product page is a OEM/Original Fiorenzato spare part. The part references for this item are 001.001.001, 001.001.005, 200000001, 200000004 and 200000004/R.
This hopper is complete and can be installed directly. This hopper comes with the lid and shutter. The bottom diameter is 59mm the upper diameter is 195mm and the overall...
€66.18
Mazzer AER stop gasket
Every Mazzer coffee grinder has this item installed. The AER gasket. This gasket is located between the coffee doser and the body or between the funnel and the body. The item has the part numbers S000GUA01 or S000GUA01/QQQ
You can find this item on the doser models of the Mazzer coffee grinder models: Mini, Lux, Super Jolly, Major, Kony, Robur, Royal and...
€5.22
Filterbasket spring 1,2mm 5 sides straight
To hold a coffee filterbasket in it’s place there is always a spring installed in the portafilter. In each modern portafilter is a recess machines to accommodate such a spring.
This spring is made from stainless steel. The cord diameter is 1,2mm. this spring has 5 flat sides. The spring is made in Italy.
€1.03
Single spout straight short 3/8"
On this product page you will see a bit of a older design of single coffee spout, a small straight one. This model of coffee spout has been used in the past with a variety of espresso machine brands such as Faema, Carimali and Cimbali espresso machines. You can use this single coffee spout with any brand you would like.
This coffee spout has been made...
€5.69
Fitting 1/2" hole dia 14mm
A welding end cap nut is used to put pressure on the welding cap so it seals against the conical surface of it. Once there is not enough pressure from the back from the welding cap nut, the seal won’t work.
This type of welding end cap is slightly different then the standard types of caps.
You will see this type of fitting for instance on the water level...
€4.92
Female plug 1/4"
A plug is a generic item which can be used in a variety of espresso machines. This specific version of the female plus is one which has a ¼”BSP-G thread. You can use this type of fitting to seal off a variety of parts of your espresso machine, hydraulic system, brewing group valves and boiler
This part is used in brands like Astoria...
€3.66
IMS E61 style shower screen fine mesh 60mm
Next to the competition shower screen which has 200 µm there is also a competition shower which has 35 µm. So you can use this on a lot of brewing groups like on the Faema E61 and E61 style brewing groups. IMS filtri has given this 60mm shower screen item the part number E6135WM.
This shower screen has a outer diameter of 60mm, the body diameter of this...
€13.65
IMS single cup filter basket 7/9 gr
The filterbasket on this page is one of the most commonly found filter basket models. This model is made by IMS Filtri in Italy. The basket is from the competition line and not the standard line. The single filterbasket on this page has the IMS product code B701TH26.5E
This single filterbasket can hold ground coffee from 7 grams up to 9grams. The basket...
€27.31
Valve rod washer 12x8x1mm
The brass washer on this product page is used in various espresso machines made by Astoria and Wega. The Astoria part number for this item is 25655 and the Wega part number is WY25655.
This brass washer has a outer diameter of 12mm a inner diameter of 8mm and a thickness of 1mm. This washer is used to spread the pressure of the steam and water shaft...
€1.19
Gaggia/Pavoni group locking gasket 73x61x1mm
The group locking gasket shown on this page can be used on various brewing groups of Gaggia and La Pavoni espresso machines. The Gaggia part reference for this item is WGA4001084000 and the La Pavoni part reference for this item is 361016.
This group locking gasket has been made from a fibre material. The length of this group locking gasket is 73mm the...
€6.28
Vibiemme heating element 1200W 230V
On this page you will find a espresso machine heating element suitable for the Vibiemme Domobar Junior and for the Vibiemme Domobar Super (ELETRESD12230).
This specific heating element gives 1200W with 230V at 50/60Hz. The connection on this specific model has 2 legs both with male 6,3x0,8mm connectors. The element itself is made from copper and the...
€87.51
Bezzera level regulator RL30/4ESS/F 120V
On this product page you will find a level regulator suitable for various Bezzera espresso machine models. This level regulator has been manufactured by the Italian company Gicar, part reference number of this item is 9.1.24.21G
The designated name of this regulator is RL30/4ESS/F and runs on 120V.
You can use this level regulator on the Bezzera B2000,...
€156.40