Best sellers

There are 2534 products.

Showing 1231-1260 of 2534 item(s)

La Cimbali steam tap knob

The steam and water valve knob on this page can be used on various Faema and La Cimbali espresso machines. The part reference for La Cimbali is 495-764-000 and for Faema 495764000. This steam wand water valve knob doesn’t come with the spring which holds the steam and water valve knob in it’s place. This item has been manufactured in Italy. This knob can...
€42.94
Quick-view

Astoria Wega valve nut

This brass nut you will find on almost every steam and water valve of the Astoria CMA group. This brass nut holds the steam and water valve shaft in place inside the gasket holder. The Astoria part reference for this item is 25461 and the Wega part reference for this item is WY25461  You can find this item basically on every model like the Astoria...
€5.50
Quick-view

Astoria Wega steam valve gasket holder

This steam and water tab gasket holder can be used in almost every steam and water valve used by the espresso machine manufacturer Astoria CMA. This item can be found in Astoria espresso machines with part reference 25616 and with Wega espresso machines under the reference WY25616. This gasket holder has on one side room for the flat gasket with the...
€9.43
Quick-view

Nuova Simonelli stainless steel valve screw

This valve shaft is a OEM/Original Nuova Simonelli spare part. The part reference of this item is 07300221. This stainless steel tab spring is made in Italy and can be used on the Nuova Simonelli models: Nuova Simonelli Aurelia, Nuova Simonelli Aurelia II, Nuova Simonelli Appia, Nuova Simonelli Premier and the Nuova Simonelli Mac models.
€21.99
Quick-view

La San Marco steam pipe washer

The item on this product page is a brass washer which is used with various La San Marco espresso machines. This washer can be used in various water and steam valves, as well as the water inlet valves. The part references for this brass washer can be found in the extra info tab. You can use this washer on the La San Marco 100, La San Marco 105, La San...
€2.50
Quick-view

Pavoni/Gaggia Brass gasket holder

The item on this product page is a OEM/Original Pavoni spare part. But this item can also be used on Saeco and Gaggia espresso machines. The Gaggia part reference is WGARB0708, the Saeco part reference is WGARB0708 and for La Pavoni it is 314014.  This gasket holder is made from machined brass. The outer diameter is 17mm, the inner diameter is 15mm. This...
€9.77
Quick-view

IMS La Spaziale 2 cup filter basket 12/18gr

One of the brands which use a different size dan standard is La Spaziale, they use filter baskets which are a lot smaller. The item on this page is a double IMS filterbasket. This basket is not from their standard line but from the Competition line. The IMS part number for this item is B652TH27.5M This double filterbasket can hold about 14 grams of...
€30.34
Quick-view

Bremas switch 20A 0-1-2

The selector switch on this page is used in a variety of Cimbali and Faema espresso machines. The part reference for Cimbali is 532-011-608 and for Faema it is 532011608. This switch has been made by the Italian company Bremas, their part reference is Bremas CS017712. This selector switch is rated up to 20A at 600V. There are 3 positions. 0-1-2....
€80.99
Quick-view

Faema motor flange pump connector set

With Faema and La Cimbali flange pumps there is a additional coupling between the flanged motor and the flanged pump. This coupling is made of 2 metal couplings. 1 connects to the espresso machine motor shaft, the other connects to the pump. Note: this coupling has a round shaft opening with a flat side. The metal connectors have a OD of 40mm. In between...
€17.84
Quick-view

Parker 3 way solenoid 110V 50/60Hz conical

On this page you will find one of the most used brewing group solenoid valves in espresso machines. But this is instead of a 230V version a 115V version. This solenoid valve has been manufactured by the company Parker. The Parker parts reference for this solenoid valve is 393106J or 393111J This 3-way solenoid valve is a model with a flat flange, this...
€115.90
Quick-view

Ode solenoid valve 3 ways 110V 50/60 Hz

On this page you will find a 110V 3 way solenoid valve made by the Italian manufacturer ODE. This specific model 31A1AR15 is made in Italy. This model is a flange solenoid valve. So it is bolted with 4 Allen bolts against a flat surface and is sealed of by 2 o rings at the bottom. In the brass body of the solenoid valve, you will find a orifice of 1,5mm....
€55.25
Quick-view

Faema E61 2 group boiler

It does happen that the boiler of your Faema e61 espresso machine has got a leak. This can have happened due to freezing in storage, corrosion, or a completely different reason. The boiler on this page doesn’t look at any boiler used in the Faema E61 espresso machine 2 group. The most famous one is the double flanged boiler, but you also have the single...
€663.46
Quick-view

Gaggia Baby/Classic boiler

The boiler/heating element on this page is a OEM/Original Gaggia espresso machine spare part. This is a boiler hand heating element in 1 and can run on 120 and 220/240V. The original part reference for this item is EF0030/02/A and EF0030/A. The heating element in this boiler produces between 570/680W at 120 and 220/240V. This boiler has been made in...
€67.64
Quick-view

San Marco boiler gasket PTFE 165X151X3mm

The boiler gasket shown on this product page is suitable for a variety of La San Marco espresso machines. The part reference for this item is 109073. The outer diameter is 165mm. the inner diameter is 150mm and the thickness is 3mm. This gasket has been made from PTFE. Made in Italy. This gasket can be used on the La San Marco 100, La San Marco 105, La...
€18.90
Quick-view

Female connector (CPF 5/12) 12 way pitch 5.08mm

The item on this product page is a terminal block. These terminal blocks can be used in Gicar and Giemme dosing devices to connect the wiring to the dosing device. This terminal block has in total 12 poles with a pitch of 5.08. The maximum wire size for connecting is 2,5mm2. The maximum operating temperature is 80°C, the nominal voltage for this item is...
€14.66
Quick-view

Bezzera dosing device 3D5 3GRCTZ LC 240VAC

On this product page you will find a Bezzera dosing device suitable for a variety of espresso machine models such as the Bezzera Ellisse and the Bezzera Ebbis.  The Bezzera part reference for this item is 7662529. The Gicar part references can be found in the extra info tab. This Bezzera dosing device has the name DOSATURA 3d5 3GRCTZ LC 240Vac. the dosing...
€294.29
Quick-view

Vibiemme dosing device 30uS t/connectors 230V

The dosing device on this product page can be used on various Vibiemme espresso machines. The corresponding Vibiemme part reference for this item is ELETDOS30. This item has been made by the Italian company Gicar and has their part reference of 9.1.23.10G00. The unit has the name of 30 MICRO ST./C NO SIC and is a 230/240V unit. This item has been made in...
€223.61
Quick-view

Gicar level regulator NRL30/1E/2C/F 115V

This Gicar level regulator is one of the most simple and common level regulators you will find. This model has the current Gicar code of 9.1.40.70G. Note: this is the 115V version and not the 230V version This Gicar level regulator has the name NRL30/1E-2C/F and runs on 115Vac. You can find this level regulator on various espresso machines such as the La...
€60.70
Quick-view

Parker solenoid valve 2 ways base mounting 220/230V 50/60Hz 9W

On this page you will find a 2 way solenoid valve made by the company Parker.  This specific Parker 2 way solenoid valve is used with various brands as a water inlet valve for filling the boiler.  The Parker parts number for this item is 393233J This 2 way solenoid valve is one of the types which has a flange model, this model is sealed with the 2 o rings...
€80.75
Quick-view

Faema rubber pump-motor connector 40 mm

To connect a flange pump and flange motor to each other you need to have 2 coupling plates and a rubber middle coupler which connects the coupling plates to eachother. This rubber motor pump coupling is universal and can be used with the metal coupling plates with a rounded off shaft and with the slitted pump coupling connection. These type of couplings...
€5.22
Quick-view

Flowmeter connector

Flowmeter connector, suitable for gicar flowmeters. Suitable for: Code Producer 18112 Astoria CMA 7631501 Bezzera 7631505 Bezzera 09013.0.00.08 Brasilia 09013.2.00.08 Brasilia 0901300008 Brasilia 8.6.17.14 Gicar 9006124 Reneka
€3.25
Quick-view

RPM clamp ring motor 330W 220/240V 50/60Hz

This RPM motor pump(model number C042204) is one of the more uncommon espresso machine pumps used. The cooling of this motor occurs by running the water which comes out of the pump true the motor to cool it down. This type of coffee machine pump is only used by the Astoria CMA group, so you would only see them on Astoria CMA and Wega espresso machines....
€190.64
Quick-view

Gaggia EN boiler gasket 220X168X3mm 10 holes

The boiler gasket on this page is used for a variety of Gaggia espresso machines. From the antique ones all the way to the modern ones. The Gaggia part references for this item are 4027014000 and CA0321/01. This boiler gasket has been made from AFM34 from Victor Reinz. This gasket has a outer diameter of 220mm a inner diameter of 168mm and a thickness of...
€19.58
Quick-view

Faema Enova S touchpanel

On this page you will find a touchpanel membrane for the Faema Enova S. This membrane can only be used on the S versions and not on the A models. The Faema part reference for this item is 915201000. This adhesive membrane has a length of 150mm and a height of 38mm and has been manufactured in Italy.
€160.76
Quick-view

Wega Sphera 4T EVD black and chromed push buttons

On this product page you will find a touch panel box for the Wega espresso machines. The Wega part reference for this item is WY18371042  This touch panel button box has 4 keys. 3 are for the pre-set volumetric dosing. The other key is the continuous and programming key. With this key you can set the volumetric dosing of the other 3 push buttons
€289.74
Quick-view

La Spaziale touchpanel 5 button

To control the dosing of the amount of water on the La Spaziale S5 espresso machine you can have 2 options. The continues buttons. So on off. Or the dosed version like the one in this page. This control panel is used on the La Spaziale S5 EK and on the La Spaziale S5 compact. This is complete control panel, it includes the knobs, casing and the circuit...
€172.11
Quick-view

La Scala Carmen automatic control keys 8

The touchpanel on this page is a OEM/Original spare part for the La Scala Carmen espresso machine. The Scala part reference for this item is C-0461. This touchpad has in total 8 keys. The key on the bottom left is for tea water, the one on the right is the continuous key. The other 6 keys are for pre-set volume doses for making a variety of coffees.
€196.08
Quick-view

La Carimali 5 button touchpanel for Eco

The push button membrane on this page is suitable for the Carimali Eco espresso machine. The Carimali part reference for this item is 02.01827. This touchpanel membrane has in total 5 keys. 4 are for the pre-set volumetric settings and the last one is for the continiou/programming key. This item has been made in Italy.
€119.74
Quick-view

Elektra Kappa temperature probe

the temperature probe on this product page can be used on the boiler of the Elektra Kappa espresso machine. The Elektra part reference number for this item is 03179059.
€90.46
Quick-view