Best sellers

There are 2635 products.

Sort by:
Sales, highest to lowest Name, A to Z Name, Z to A Price, low to high Price, high to low
Showing 1321-1350 of 2635 item(s)
Astoria/Wega Flat Copper Gasket 8.5x5x1mm - Durable & Precise Fit Astoria/Wega Flat Copper Gasket 8.5x5x1mm - Durable & Precise Fit

Astoria/Wega flat copper gasket 8,5x5x1mm

The copper washer on this page is used on the espresso machines of Astoria CMA. So on Astoria and Wega espresso machines. The Astoria part refence number is 12155. For Wega it is 560328 and WY12155. This item is a OEM/original Astoria/Wega spare part. This copper gasket has a outer diameter of 8,5mm a inner diameter of 5mm and a thickness of 1mm. This...
€0.39
Quick-view
Brooks Parts | Teflon tube 3x5mm Brooks Parts | Teflon tube 3x5mm

Teflon tube 3x5mm

A Teflon tube is mainly used when you can’t use a silicone hose, due to the higher pressure. This Teflon tube has a outer diameter of 54mm and a inner diameter of 3mm, with a wall thickness of 1mm. This product has been made in Italy. This product is sold per M1
€5.83
Quick-view
Cimbali steam valve tap handle original Cimbali steam valve tap handle original

Cimbali steam valve tap handle original

The Cimbali part reference number for this item is 913-729-020. This item is not the same as part 492-902-000. Which has a D shaped pin hole with a diameter of 6x8mm. Where this part it is 8x5,5mm. This item is a OEM/original Cimbali part and has been made in Italy. You can use this valve handle on the M39 versions, M24, M26 and the M28 espresso machines.
€59.09
Quick-view
Brooks Parts | Bicone soldering fitting 6mm tubing Brooks Parts | Bicone soldering fitting 6mm tubing

Bicone soldering fitting 6mm tubing

This soldering fitting is a bicone model, which is different then the regular ones. This specific model is used in combination with 6mm copper tubing and with the dedicated ¼” BSP nut.
€0.66
Quick-view
SanRemo steam valve knob...

SanRemo steam valve knob insert Original

This valve knob insert is used on the SanRemo Verona espresso machines. It is used in combination with the valve knob, with has SR part number 10091140A. This steam valve knob insert indicates the open and closed position. This part is a OEM/original spare part which has been made in Italy. The SR part reference number for this item is 10091142.
€9.76
Quick-view
Brooks Parts | Ducati Energia 25 µF 416.10.26.64 capacitor Brooks Parts | Ducati Energia 25 µF 416.10.26.64 capacitor

Ducati Energia 25 µF 416.10.26.64 capacitor

The capacitor on this product page is made by the Italian brand Ducati Energia. This specific model is a 25 µF model, which can run up to 450V 50/60Hz. The operating temperature is from -25 Degree C up to 85 degree C. The connectors have a width of 6,35mm and a thickness of 0,8mm. This capacitor has a M8 thread on the end. The outer diameter is 40mm and...
€13.54
Quick-view
Nuova Simonelli cup warmer grid 365x330mm Nuova Simonelli cup warmer grid 365x330mm

Nuova Simonelli cup warmer grid 365x330mm

A cup warmer grid is a ideal and relatively cheap solution to keep your stainless steel cup warmer grid scratch free.  This specific item is a OEM/original Nuova Simonelli spare part. The NS part reference number is 05340023 This plastic cup warmer grid is made form plastic and has a length of 364mm and a width of 330mm, depending how you see it. This...
€22.23
Quick-view
La Cimbali M39 doming sticker coffee selection La Cimbali M39 doming sticker coffee selection

La Cimbali M39 doming sticker coffee selection

It is quite common on the La Cimbali M39 that the coffee selection stickers break or come loose. To get your espresso machine back to original state you can replace this sticker with a new one. It is a doming sticker, so it is slightly rounded. The La Cimbali part references for this part art 913-192-000, 913-192-010, 913192020 and  913-192-020. When not...
€31.71
Quick-view
Coffee tamping mat corner Coffee tamping mat corner

Coffee tamping mat corner

This tamping mat is one of the better price/quality tamping mats. This version is the version with a small overhang, which is ideal at the edge of a countertop.  This tamping mat can be used in as well as a Home barista, but is also suitable for professional use. This tamper mat is made from a black rubber and has a spare section for your tamper. The...
€18.16
Quick-view
Motta milk pitcher thermometer Motta milk pitcher thermometer

Motta milk pitcher thermometer

With this thermometer you can measure the temperature of the milk in your milk pitcher, this will make sure that you are able to make the best cappuccino’s and Latte’s. This thermometer has a dial which has a diameter of 45mm. The temperature range is in celcius and Fahrenheid. Going from 0 – 100 degree celcius and from 0 up to 220 degree fahrenheid. The...
€10.71
Quick-view
Motta Lady milk pitcher 0,35l Motta Lady milk pitcher 0,35l

Motta Lady milk pitcher 0,35l

This milk pitcher is made by the Italian barista accessory manufacturer Motta Mettalurgica. This specific model of milk pitcher is called the Lady and can hold up to 0,35L of milk for frothing up. The milk pitcher is made from stainless steel 304, which is a food safe type of stainless. This model of milk pitcher is a light weight model, so ideally for a...
€20.33
Quick-view
Ulka Vibration pump EX5GW 48W 24Vac Ulka Vibration pump EX5GW 48W 24Vac

Ulka Vibration pump EX5GW 48W 24Vac

This vibration pump is made by the Italian company Ulka. This specific model is the EX5GW and is powered by 24V AC at 50/60Hz. The pump itself produces 48W. The Ulka part reference number for this pump is EX5GW24V48W On the inlet side you have a hose connection of 6mm. The outlet side is made from brass and has a female 1/8” BSP-G thread. The maximum...
€33.87
Quick-view
Brooks Milkcleaner 1000ml Brooks Milkcleaner 1000ml

Brooks Milkcleaner 1000ml

The milk cleaner on this page is a universal milk cleaner for all types of espresso machines. Whether you have a fully automatic espresso machine that has an automatic milk frothing system, or a more traditional espresso machine that uses a steam wand.The milk cleaner that Brooks sells is made in Germany and has an NSF certification. This cleaner is...
€11.19
Quick-view
Astoria/Wega heating element 2700/2940W 230/240V Astoria/Wega heating element 2700/2940W 230/240V

Astoria/Wega heating element 2700/2940W 230/240V

The heating element on this product page is a smaller model heating element which is used on various Astoria and Wega 1 group espresso machines. The Astoria part reference number for this item is 17012 and for Wega they are 17012, WY1702 and WY4617012.This heating element produces 2700/2940W at 230/240V. The Immersed length of this heating element is...
€91.07
Quick-view
Round soft cleaning brush 7-8mm Round soft cleaning brush 7-8mm

Round soft cleaning brush 7-8mm

One of the most underrated cleaning tools is the cleaning brush, but with a espresso machine one of the handiest components. The brush on this page is quite a small example, but that is really handy too get in the small corners. The brush diameter is approx. 7-8mm(measured at the base) and a relatively soft. So ideal where loose coffee grounds are found....
€2.02
Quick-view
Astoria double coffee portafilter original Astoria double coffee portafilter original

Astoria double coffee portafilter original

The double portafilter shown on this product page is a OEM/Original Astoria espresso machine spare part. The Astoria part reference for this item is 27311051 and 8327311051R. Note, this is the reference for the body 27311000. This single portafilter has a open spout, this make it easier to clean your portafilter. The ear orientation is 45 degree. The...
€100.37
Quick-view
Bezzera switch SSR 7635424.01 Bezzera switch SSR 7635424.01

Bezzera switch SSR 7635424.01

The item on this product page is a Solid State Relay (SSR) which can be used on variety of Bezzera espresso machines.  The part reference number for this item is 7635424.01 This SSR uses DC and AC power. The input side is 4-32V DC, and the load side can hold up to 25A at 250V.Seen the input side is DC you need to make sure that you have the polarity...
€67.62
Quick-view
Gaggia automatic contact...

Gaggia automatic contact thermostat 145°C m4

The item on this product page is a contact thermostat used on a variety of domestic Gaggia espresso machines. The Gaggia part reference numbers are DM1288  and DM1288/K. This thermostat is a automatic model, so not a safety switch. It is set at 145 degree Celsius. On the bottom is a m4 male thread. This thermostat is made in China. You use this thermostat...
€12.86
Quick-view
Vibiemme portafilter 2 coffee Vibiemme portafilter 2 coffee

Vibiemme portafilter 2 coffee

The portafilter on this product page is a 2 coffee portafilter which can be used on a variety of Vibiemme brewing groups. This is the case for the commercial and the domestic espresso machine models. This portafilter has a double spout. The ear orientation is 90 degree and the thickness of the ears is 5,5mm. The portafilter comes with a stainless steel...
€52.36
Quick-view
Astoria single pressure gauge 0-3 bar Astoria single pressure gauge 0-3 bar

Astoria single pressure gauge 0-3 bar

The pressure gauge on this product page can be used on various Astoria coffee machines. The Astoria part reference number for this manometer is 21113 . This pressure gauge is a single model. This pressure gauge is a boiler pressure gauge. The pressure range goes from 0 up to 3 bar. The connection on the back is a ¼” male thread. The outer diameter of the...
€28.99
Quick-view
Fiorenzato F5 grinding burrs 64mm original Fiorenzato F5 grinding burrs 64mm original

Fiorenzato F5 grinding burrs 64mm original

The grinding burrs on this product page are OEM/Original Fiorenzato spare parts. The Fiorenzato part reference number for these grinding burrs is 400000005. These grinding burrs are from the flat type and have a right turning direction. The external diameter is 64mm, the internal diameter is 37mm and the thickness is 8,5mm. There are in total 3 mounting...
€103.54
Quick-view
Nuova Simonelli bottomless portafilter Nuova Simonelli bottomless portafilter

Nuova Simonelli bottomless portafilter

The portafilter on this product page is a bottomless portafilter, which is suitable for various Nuova Simonelli espresso machines.  This bottomless portafilter does not have a Nuova Simonelli part reference number. The body of the bottomless portafilter is made from casted brass, which has been machined and nickel and chrome plated. The ear orientation of...
€74.18
Quick-view
San Remo double portafilter original San Remo double portafilter original

San Remo double portafilter original

The portafilter on this product page is a OEM/original San Remo spare part. This specific model is a 2 coffee portafilter. The San Remo part reference number for this item is 10402312B. This portafilter is one suitable for 2 coffee. The spout used is a open model for easy cleaning.  The thickness of the ears is 6mm and they have a 90 degree orientation....
€116.01
Quick-view
Casadio Enea/Theo middle doser star Casadio Enea/Theo middle doser star

Casadio Enea/Theo middle doser star

The item on this product page is a middle doser star. This doser star can be used on various Casadio coffee grinders. The Casadio part reference number is 965282010. This doser star is used in combination with the bottom star (965283000) and the upper doser star (965192000).This lower doser star has been made from a black plastic. You can use this item on...
€29.46
Quick-view
Cimbali/Faema microswitch box

Cimbali/Faema microswitch box

The doser part shown on this product page can be found on various doser coffee grinders of the brands Cimbali and Faema. This item is a microswitch box, which is located in the doser. The Cimbali part references are 4529133522 and 4529-133-522. For Faema the part reference is 4529133522.  This box is used in combination with the microswitch cover, in this...
€22.75
Quick-view
Fluid o tech clamp ring pump 200L/H NSF Fluid o tech clamp ring pump 200L/H NSF

Fluid o tech clamp ring pump 200L/H NSF

The item on this product page is a fluid o tech espresso machine pump. This specific model can be used on various espresso machines such as Cimbali, Nuova Simonelli, San Remo and Victoria Arduino. The part references can be found in the extra info tab. This espresso machine pump can produce 200 L/H, on the side is a balanced bypass. The model is a clamp...
€119.07
Quick-view
Astoria/Wega Safety valve...

Astoria/Wega Safety valve cover base

The item on this product page is a safety valve protective cover, if the safety valves opens this valve will drain the water coming out of the valve to the drain. This cover is a OEM/Original Astoria CMA spare part, so you can use this item on various espresso machine brands such as Astoria and Wega. The Astoria part reference number is 56009980 and the...
€3.10
Quick-view
Ronda A1 knock box insert Ronda A1 knock box insert

Ronda A1 knock box insert

The item on this page is a knock box insert for a Ronda knock box. This plastic container which is used in the Ronda A1 series of classic drawers. It is possible that overtime the mounting points break or that this insert breaks during cleaning. Then it is handy to only replace the insert instead of the entire box. This box has been made in Italy. It does...
€68.40
Quick-view
Brooks tamper base 58mm in american walnut Brooks tamper base 58mm in american walnut

Brooks tamper base 58mm in american walnut

As a barista you want that your tamper has a safety spot to be stored when not in use. Now we have wooden bases for various tamper sizes. This item is suitable for tampers which go up to 58,5mm. so capable for almost every tamper. This tamper base has been made from laminated American walnut. The base has been coated twice in food safe wax. On the base is...
€23.12
Quick-view