Parker solenoid coil ZH14 220/230V

This Parker YB09 solenoid coil is used on a wide range of professional espresso and coffee machines. It is mounted on Parker solenoid valves in the hydraulic circuits of brands such as Elektra, Vibiemme, Visacrem, Quality Espresso and others. The coil operates at 220/230V AC with a power of 9W and a frequency of 50/60Hz, ideal for standard European...

This plunger is made by the Italian company ODE and has the part reference R450898/V. this plunger is used for valves in the 21A to 21L series which have a orifice bigger then 3mm. The sealing material used on this plunger is FKM. This plunger is used on vending machines made by Rheavendors.

This spare part is used on 2 way valves of ODE. This is the sleeve which houses the plunger. It has part reference numbers R452062 and R452713. The header fitting has a diameter of 13mm and has a 1/8” thread, this part can be found on vending machines of Lavazza, Necta and Rheavendors.

This solenoid valve coil is model LBA05024AS, which is a 24V DC coil which produces 5W.

This solenoid valve coil is one of the most coils used on a variety of Horeca machines. The ZB09 produces 9W with 220/240 at 50/60Hz. The coil has a width of 34mm a height of 33mm and a length of 43mm and has bene made in Italy. You can use this coil on a variety of machines, ranging from espresso machines, to ovens and ice makers. For the complete list...

This specific solenoid valve body is the model 3019F1GRG7. It has on the top a female drain which has a 1/8” BSP-G thread. The central hole, orifice, has a diameter of 1,5mm and is sealed of with a ruby seal. The coil itself is rated up to 14 bar pressure. The housing is made from stainless steel and is NSF rated. The temperature rating is from -40 degree...

This valve body is made by the company Parker and it is a 3 way valve, with the part number PM128IV.5. The drain side is a 1/8”bsp-g thread and has a conical shape.  The plunger inside the coil is rated up to 20bar. This plunger is sealed of with a FKM gasket. This gasket seals off the central hole, orifice, which has a diameter of 1,3mm. The entire body...

This parker solenoid valve coil is the model ZB09, but this one is a 110/120V version. So make sure that you don’t install this on a 230V valve. The coil itself is a 9W version and is powered by 110/120V at 50/60hz. This coil has a width of 34mm a height of 33mm and a length of 43mm. This coil is made in Italy. It can be used with various applications...