Best sellers

There are 2528 products.

Sort by:
Sales, highest to lowest Name, A to Z Name, Z to A Price, low to high Price, high to low
Showing 181-210 of 2528 item(s)
La Cimbali sight glass gasket La Cimbali sight glass gasket

La Spaziale sight glass gasket

The sight glass gasket on this page is a OEM/Original La Spaziale spare part. This item has the La Spaziale part reference of 00265. This sight glass gasket has been made from red silicone. The outer diameters are 17 and 14mm. The internal diameter is 11mm. The height of the gasket is 9 and 4mm. This gasket has been made in Italy. You can find this red...
€4.32
Quick-view
La Cimbali HX 150mm La Cimbali HX 150mm

La Cimbali heat exchanger 150mm

On this page you will find a heat exchanger cartridge. This tube is available in 2 versions a 210mm version and a 150mm version. The one on this page is a 150mm version. The length of this copper heat exchanger(HX) is 150mm and has a outer diameter of 42mm. It is possible that you get a blank copper one or a copper with nickel plating. This cartridge can...
€32.78
Quick-view
Faema E61 steam valve knob Faema E61 steam valve knob

Faema E61 steam valve knob

The steam and water valve knob on this page is mainly famous as the knobs used on the classic Faema E61 espresso machines. But nowadays they are used in a variety of other brands as well. Like with Vibiemme, La Scala and Grimac. This type of knob can also be used on the modern Faema E61 legend and Jubilee espresso machines. For the part references check...
€18.50
Quick-view
Valve rod washer 18x6.4x1.6mm Valve rod washer 18x6.4x1.6mm

Valve rod washer 18x6.4x1.6mm

The item on this product page is a M6 washer, this washer can be used on various steam and water valves. Such as the brands Marzocco, Royal, Carimali and San Remo. The Carimali part reference is 93.00058, the Marzocco reference is L165/9 and for San Remo it is 10402040. This flat washer is made from zinc plated steel, this is not a issue seen its not in...
€0.66
Quick-view
Astoria Wega steam water shaft gasket Astoria Wega steam water shaft gasket

Astoria Wega steam water shaft gasket

The valve shaft gasket on this page is used with basically every steam and water valve manufactured for Astoria and Wega espresso machines. This gasket makes sure that there doesn’t leak any steam or water past the shaft of the valve. The Astoria part reference is 12204 and the Wega part reference is WY12204  This gasket has been made out...
€1.55
Quick-view
O ring 15.08x2.62mm O ring 15.08x2.62mm

O ring 15.08x2.62mm EPDM

On this product page you will find a EPDM o ring. This o ring is used in a variety of espresso machines and applications. With brands like Astoria, San Marco, Wega, La Pavoni and Brasilia. The o ring is made from EPDM. The thickness of the cord is 2,62mm and the internal diameter of the o ring is 15,08mm This part is used mainly in brewing groups with...
€1.19
Quick-view
Bezzera heating element 1350W 110V Bezzera heating element 1350W 110V

Bezzera heating element 1350W 110V

The heating element on this page is a element used in various Bezzera espresso machines with a single group. The Bezzera part reference for this item is 5721127TP . This heating element produces 1350W at 110V and has 2 connecting poles. The immersed length of the heating element is 160mm. This heating element is a screw in type of heating element and has...
€55.63
Quick-view
E61 brewing group gasket rebuild kit E61 brewing group gasket rebuild kit

Faema E61 brewing group gasket rebuild kit

The gasket only rebuild kit on this product page comes with the consumables used on the Faema E61 brewing group. So this complete set can not be used on other E61 style of brewing groups, a lot of the items are compatible but not all of them. In most cases you don’t have to replace the brass items in your brewing group, seen they will wear out less...
€28.80
Quick-view
Filterholder gasket 73x57x8mm Filterholder gasket 73x57x8mm

Filterholder gasket 73x57x8mm

On this page you will find a portafilter gasket suitable for a variety of brands such as Faema, San Remo, Cimbali, Vibiemme, La Scala, Bezzera, Pavoni and Isomac. This portafilter gasket has been made from NBR. The outer diameter is 73mm the inner diameter is 57mm and the thickness of this gasket is 8mm. This gasket has been made in Italy. You can use...
€5.53
Quick-view
Steam water valve joint o ring 12,1x2,7mm EPDM Steam water valve joint o ring 12,1x2,7mm EPDM

Steam water valve joint o ring 12,1x2,7mm EPDM

The o ring on this page can be used on various steam and water valves used on San Remo espresso machines. The San Remo part reference number for this o ring is 10402082  This o ring has been made from EPDM. This o ring has a cord diameter of 2,7mm. the inner diameter is 12,1mm. This o ring has been made in Italy. You can use this o ring on the San...
€1.12
Quick-view
IMS E61 style shower screen IMS E61 style shower screen

IMS E61 style shower screen

This shower screen style is one of the most used shower screens with espresso machines. It can be for instance used on the Faema E61 and E61 style brewing groups. This specific model of shower screen is made by IMS Filtri in Italy. But this is not a standard version, it is from their Competition series shower screens. This specific model is the E61200IM....
€22.75
Quick-view
Astoria sight glass 11x170mm Astoria sight glass 11x170mm

Astoria sight glass 11x170mm

On this page you will find a sight glass for various Astoria and Wega espresso machines. The Astoria part number for this sight glass is 21300 and the Wega part number is WY21300. The sight glass has a outer diameter of 11mm and a overall length of 170mm. This sight glass doesn’t have any reference lines. This sight glass of 11x170mm can be used on the...
€5.22
Quick-view
O ring 11,1X1,78mm La Spaziale o ring 11,1X1,78mm

O ring 11,1X1,78mm

This o ring shown on this page has a variety of applications. You can see that it is used with water inlet valves of the brands Astoria, Wega, Victoria Arduino and Gaggia. But also used with Nuova Simonelli espresso machines on various locations like the brewing group, water level and with hydraulic parts. As well on hydraulic systems on the La Spaziale...
€1.13
Quick-view
Brass welding cap 4mm Brass welding cap 4mm

Brass welding cap 4mm

On this product page you will find a brass welding cap. These welding caps are soldered to the ends of copper tubes in combination with a welding nut. This round surface seals off when the nut it tightened. The brass material compresses and this seals off the valve. At some point this seal will leak. This type of brass welding cap is the smallest welding...
€1.95
Quick-view
La Cimbali Liberty switch red La Cimbali Liberty switch red

bipolar switch red 16A 250V

On this page you will find a red bipolar switch. This switch illuminates when turned into the on/1 position. It has a silk screen print which symbolizes on/off. In the way of 0 and 1. This switch is rated up to 16A at 250V. The maximum operating temperature is 120 degree Celsius. There are 4 male spade connectors. The switch can be mounted in a hole with...
€7.24
Quick-view
Brooks seals for La Pavoni Europiccola piston gasket set Brooks seals for La Pavoni Europiccola piston gasket set

Brooks seals for La Pavoni Europiccola piston gasket

On this product page you will find our own produces piston gaskets suitable for a variety of la Pavoni models such as the La Pavoni Europiccola La Pavoni Professional, La Pavoni Stradivari, La Pavoni Mignon, Gaggia 105 lever groups and so on. The Gaggia part reference for this item is S361005, for La Pavoni the part reference is 361005. These gaskets are...
€9.70
Quick-view
Stainless steel flex pipe 1500mm 3/8 FF conical base Stainless steel flex pipe 1500mm 3/8 FF conical base

Stainless steel flex pipe 1500mm 3/8 FF conical base

The flexible tube on this page has a overall length of 1500mm. This includes the fittings. The fittings on this pipe are female 3/8” BSP-G and both have a conical base, so there is no gasket needed. The tubes are rated up to 10 bar and with a maximum working temperature of 90 degree Celsius.
€17.11
Quick-view
La Carimali filterholder...

La Carimali filterholder gasket 69x57x7,5mm

This portafilter gasket can be used on various La Carimali espresso machines. The part reference for this item is 87.00122.00.19. This gasket has been made from NBR. The outer diameter is 69mm the inner diameter is 57mm and the thickness is 7,5mm. this gasket has been made in Italy. You can use this portafilter gasket on the Carimali Pratica, Carimali E9,...
€3.47
Quick-view
EPDM gasket o ring 4,47x1,78mm EPDM gasket o ring 4,47x1,78mm

EPDM gasket o ring 4,47x1,78mm

The o ring on this product page can be used on various espresso machine brands such as Faema, Cimbali San Marco, Rancilio, Brasilia and Gaggia. The Brasilia part reference number are 00831.0.00.02, 0142800002  and 01428.0.00.02. The Faema part reference number is 400293000, for Rancilio it is 36401003  and for San Marco it is 109108. The o ring on this...
€0.96
Quick-view
Copper gasket 18x14x1.5mm 1/4" Copper gasket 18x14x1.5mm 1/4"

Copper gasket 18x14x1.5mm 1/4"

The flat copper gasket on this product page can be used with a variety of espresso machines and on various applications. You can use this copper gasket on espresso machines such as Marzocco, Casadio, ECM Heidelberg, La Scala, La Cimbali, Faema, Astoria, Wega, Nuova Simonelli, Wega and Rancilio. You will mainly see the use of this copper gasket to seal...
€2.23
Quick-view
Flowmeter gasket o ring Flowmeter gasket o ring

Flowmeter gasket o ring

It is possible that the flowmeter in your espresso machine starts to leak. On this page you will find a replacement part for most flowmeters. This is the sealing o ring which goes between the flowmeter body and the measuring device. This o ring is suitable for Digmesa and Gicar flowmeters. The cord diameter of this o ring is 1,78mm and the inner diameter...
€1.00
Quick-view
Gicar level regulator NRL30/1E/2C/F 230V Gicar level regulator NRL30/1E/2C/F 230V

Gicar level regulator NRL30/1E/2C/F 230V

This Gicar level regulator is one of the most simple and common level regulators you will find. This model has the current Gicar code of 9.1.40.71G. there are a lot more product codes, you can find those in the extra info tab. This Gicar level regulator has the name NRL30/1E-2C/F and runs on 230Vac. You can find this level regulator on various espresso...
€45.52
Quick-view
Faema E61 group infusion spring 14x45mm Faema E61 group infusion spring 14x45mm

Faema E61 group infusion spring

On this page you will find a stainless steel compression spring with a outer dimension of 14mm and a length at rest of 45mm. This compression spring is being used in a variety of espresso machine brewing groups. This ranges from the famous Faema E61 brewing group, the E61 style brewing group. But also a variety of other type of brewing groups used by...
€1.62
Quick-view
La Cimbali single portafilter La Cimbali single portafilter

La Cimbali single portafilter

On this product page you will find a single portafilter for various La Cimbali espresso machines. The La Cimbali part reference for this item is 537-027-100. This portafilter has been made from casted brass and has been chrome plated. The ear orientation is 90 degree. The thickness of these ears is 5,5mm. The portafilter comes with a single spout. This...
€45.52
Quick-view
O ring gasket nbr 8,9x1,9mm O ring gasket nbr 8,9x1,9mm

O ring gasket nbr 8,9x1,9mm

This O ring in nbr with the specifications 8,9x1,9mm. Makes sure that the brass non return valve seals against the body of the non return valve. Return to the Faema E61 valve parts overview
€0.59
Quick-view