Casadio steam water valve knob original

In some cases, the shower screen is attached with a screw, in most cases that is a Philips or a slotted screw. It is difficult to remove it with a regular screwdriver due to the limited height under the brew group.  But for that you need a shortened slotted screwdriver, in this case the one from the German brand Wera, which fits well under the brewing...

The shower screen on this page is used on the various brewing groups Faema has made, which are also used on various Casadio and Cimbali espresso machines. This shower screen is a OEM/original spare part of Gruppo Cimbali. It can be used on a wide range of espresso machines from The Faema E61, up to the Faema President and Teorema. But also on the M23-UP...

On this page you will find a bore retaining ring for steam and water valves used by the La Cimbali group. This item is a OEM/Original part. The item is used hold the steam/water shaft inside the valve. You are unable to completely turn out this shaft. This retaining ring has a outer diameter of 23,5mm. the ring has been made out of steel spring C80...

One of the most universal items. The male brass plug. The plus on this page can be found in the catalogue of a variety of espresso machine manufacturers like Astoria, Faema, La Spaziale and Wega. This specific plug has a male ¼”BSP-G thread. The height of this plug is 13 mm and the wrench size for this plug is 17mm.

On this page you will find a rubber like sleeve. This rubber like sleeve is a safety valve protection sleeve. This sleeve slides over a safety valve. When there is a over pressure and steam and water are coming out off the safety valve. This sleeve will catch it and with the side connection the water will flow to the drain. This item doesn’t come with the...

On this page you will find a steam nozzle which can be used in combination with some models of  Faema, Casadio and La Cimbali. Note: this steam nozzle has a male thread, so if your original steam nozzle has a male thread as well they are compatible. The steam nozzle has in a circular pattern 3 holes and in the middle a additional one. So I ottal 4...

On this solenoid valve is a Lucifer/Parker 3 way solenoid valve which is used on various espresso machine models of Rancilio, the reference part number for Rancilio is 34040024. This brewing group solenoid valve is a flanged 3 way solenoid valve. The coil used on this solenoid valve is a 24V DC 9W coil, with the part number 481865C2. The outlet on top of...

On this page you will find a shower screen holder suitable for the Casadio Venti groups and most of the La Cimbali brewing groups. For the Casadio machines you will find it under the part number 457037048 and for Cimbali espresso machines with part number 457-037-048  This brass shower holder has a outer diameter of 35mm and 6 smaller holes for spreading...